• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.11-15
• /
• 2017

Lithium-ion batteries are widely used, from lightweight to energy-intensive, from small devices to large ESSs. However, it is sensitive to the surrounding environment and there is a change in performance depending on the temperature change. In this study, the temperature dependence of the charge / discharge characteristics of the battery is shown through simulation and the distribution of the salt concentration in the electrolyte is observed when the sudden temperature change is applied.

• Atmosphere
• /
• v.25 no.3
• /
• pp.461-472
• /
• 2015

The sudden stratospheric warming (SSW), which is characterized by an abrupt increase of polar stratospheric temperature by several tens of degrees in a week, has been known to affect tropospheric weather and climate on sub-seasonal time scale in the boreal winter. Such downward coupling has been often examined in North Atlantic and Europe, but rarely examined in East Asia. In this study, by applying the two definitions of SSW to the reanalysis data, the possible impacts of the SSW events on the surface air temperature (SAT) and tropospheric circulation in East Asia are analyzed. It is found that Eurasian continent, including Siberia and the Northeast Asia, tends to experience anomalously cold SAT for up to sixty days after the SSW events. The resulting SAT anomalies largely resemble those associated with negative Artic Oscillation. However, over East Asia, SSW-related SAT change is weak and not statistically significant. Only during the extreme SSW events when the downward coupling between the stratosphere and troposphere is strong, East Asia exhibits significantly cold SAT anomalies. This relationship is presented by grouping SSW events into those followed by cold SAT anomalies over East Asia and those by warm anomalies for varying threshold values of the SSW events.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.759-766
• /
• 2004

Busan has its unique character which differed from inland such as Seoul and Daegu Because Busan is located in coast district of Korea, it could be inferred that the climate change in Busan had been influenced by foreshore reclamation in the urbanization process. The purpose of this study is to investigate the relationship between reclamation of the foreshore and climate change by analysing the climate change over the past 70 years in three metropolitan cities. The conclusion from this study are as follows. 1) There was not a big difference among elements of climate change in three cities. 2) Annual mean minimum temperature in Seoul and Daegu had remarkably increased over the past 70 years. On the other hand, annual maximum temperature in Busan had a sudden rise in the only tome to reclaim the foreshore.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3074-3079
• /
• 2007

The conventional control valves have been used at the locations occurring high differential pressure and high temperature which causes cavitation, flashing, severe vibration due to abrupt flow change, and sudden pressure drop. Previous studies concerning control valves focused to prevent damage of valve trim due to the internal leak and low flow rate. The newly designed helical trim of control valve has been installed at the location of high pressure change and high temperature in a power plant, and operated for evaluation. It is confirmed that the new control valve developed in this study generates flow characteristics in comparison with previous helical trim of control valves.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.81-82
• /
• 2018

The structure of the RC structure is actively reinforcing the structure of the building which has suffered from aging, artificial and natural damage of the building. Among various reinforcement methods, epoxy adhesive is used to attach FRP in FRP reinforcement method which is reinforcing by attaching FRP to the structural part. At this time, the epoxy adhesive having a low critical temperature has a sudden adhesive failure upon exposure to heat, and thus, the development of an inorganic fireproof adhesive having a high critical temperature has progressed. Therefore, in this study, the compositional change of inorganic fire - resistant adhesive exposed to high temperature heat was analyzed by XRD.

• Journal of the korean society of oceanography
• /
• v.35 no.4
• /
• pp.170-178
• /
• 2000

Low salinity water was observed during May in the Cheju Strait. Its structure and source were studied by using both the hydrographic data collected not only in the Cheju Strait during 1987-1989 but also in the wider area around Cheju Island extending to the Bank of Changjiang river in 1994 and the current data taken in the Strait during 1987-1989. The water had lower values of temperature, salinity, and density compared with the surrounding water and it was found in the surface layer outside of Tsushima Current Water 10-50 km off Cheju coast. The density of low salinity water was more dependent on salinity than on temperature. The low salinity water flowed into the Strait from the west as a series of intermittent waters whose size was variable in width and in thickness. The low salinity water was originated from the Chanajiang River Diluted Water. In the Cheju Strait, the water showed changes within 3 days on time and 30-50 km on space, and its sudden appearance was marked especially in May. Such strong variability and sudden appearance may be attributed to the beginning stage in May when the fresh water of Changjiang River Diluted Water starts to arrive in the Cheju Strait.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.396-400
• /
• 2003

This paper has studied thermal characteristics of machine tool to develope high speed spindle and optimum design condidering the thermal deformation. Comparing the test data of temperature measurement and structural analysis data using FEM, we verifiedthe test validity and predicted thermal deformation, influence of spindle generation of heat, and established cooling system to prevent the thermal deformation. 1) The temperature rise of spindle system depends on increasing number of rotation and shows sudden doubling increment of number of rotation over 7,000rpm. 2) Oil jacket cooling can be effective cooling method below 8,000rpm but, over 8,000rpm, it shows the decrement of cooling effect. 3) Comparing FEM analysis results and revolution test results, we can confirmn approximate temperature change consequently, it is possible to simulate temperature rise and thermal distribution on the inside of spindle system. 4) We can confirm that simulated approach by FEM analysis can be effective method in thermal-appropriate design..

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.980-984
• /
• 2002

This paper has studied thermal characteristics of machine tool to develope high speed spindle and optimum design condidering the thermal deformation. Comparing the test data of temperature measurement and structural analysis data using FEM, we verified the test validity and predicted thermal deformation, influence of spindle generation of heat, and established cooling system to prevent the thermal deformation. 1) The temperature rise of spindle system depends on increasing number of rotation and shows sudden doubling increment of number of rotation over 7,000rpm. 2) Oil jacket cooling can be effective cooling method below 8,000rpm but, over 8,000rpm, it shows the decrement of cooling effect. 3) Comparing FEM analysis results and revolution test results, we can confirm approximate temperature change consequently, it is possible to simulate temperature rise and thermal distribution on the inside of spindle system. 4) We can confirm that simulated approach by FEM analysis can be effective method in thermal-appropriate design.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.498-503
• /
• 2002

This paper has studied thermal characteristics of machine tool to develope high speed spindle and optimum design considering the thermal deformation. Comparing the test data of temperature measurement and structural analysis data using FEM, we verified the test validity and predicted thermal deformation, influence of spindle generation of heat, and established cooling system to prevent the thermal deformation. 1) The temperature rise of spindle system depends on increasing number of rotation and shows sudden doubling increment of number of rotation over 7,000rpm. 2) Oil jacket cooling can be effective cooling method below 8,000rpm but, over 8,000rpm, it shows the decrement of cooling effect. 3) Comparing FEM analysis results and revolution test results, we can confirmn approximate temperature change consequently, it is possible to simulate temperature rise and thermal distribution on the inside of spindle system. 4) We can confirm that simulated approach by FEM analysis can be effective mettled in thermal-appropriate design.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.3
• /
• pp.152-158
• /
• 2006

The objective of this study is to investigate change in diurnal respiration and transpiration of the fruits of kiwifruit during fruit growth. Three-hourly fruit transpiration and respiration rate were measured by a chamber technique. Results showed a tendency of higher transpiration and respiration in at maturation to commercial harvest period in 1995 fruit than in 1996 fruit. Fruit respiration rates were very similar to the transpiration rates. The air temperature record for the fruit maturation period in 1996 showed a sudden drop on September $19{\sim}24$ and October 14 down to $7{\sim}13^{\circ}C$. These results suggest that abnormal fruit transpiration and respiration rate in the fruit maturation period might be influenced by the air temperature.