• 제목/요약/키워드: Subsurface dam

검색결과 35건 처리시간 0.027초

가뭄대비 농업용 지하댐 적지 평가 지표 개발 - 계층분석과정의 적용 - (Development of Suitable Sites Assessment Criteria for Agricultural Subsurface Dam for drought Management using Analytic Hierarchy Process (AHP))

  • 명우호;송성호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제22권6호
    • /
    • pp.37-47
    • /
    • 2017
  • Climate change has often resulted in severe droughts in a rice-farming season (i.e., April to June), and the large amount of water resources were needed to cope with droughts during the season. Therefore, the subsurface dam, which is able to store groundwater resources in the alluvium aquifer, has been considered to be an alternative for securing more groundwater resources. In this study, suitable sites assessment criteria for agricultural subsurface dam using analytic hierarchy process (AHP) were established for adequate drought management. Moreover, the criteria were applied to the existing five agricultural subsurface dams to verify their applicability of groundwater supply for each subsurface dam. The assessment criteria were divided into three major categories (geology, hydrology and business condition) and classified to 12 individual sub-categories with weighting. From the assessment, Ian subsurface dam and Wooil subsurface dam were identified as the best and the worst suitable site, respectively, and this result was in accordance with the average amount of annual groundwater supply by each subsurface dam during the period of 2011-2017.

국내 농업용 지하댐의 현황 및 활용 사례 (Current Status and Application of Agricultural Subsurface Dams in Korea)

  • 용환호;송성호;명우호;안중기;홍순욱
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제22권3호
    • /
    • pp.18-26
    • /
    • 2017
  • The increasing frequency of droughts has been increasing the necessity of utilizing subsurface dams as reliable groundwater resources in areas where it is difficult to supply adequate agricultural water using only surface water. In this study, we analyzed the current status and actual conditions of five agricultural subsurface dams as well as the effect of obtaining additional groundwater from subsurface dams operated as one aspect of the sustainable integrated water management system. Based on the construction methods and functions of each subsurface dam, the five subsurface dams are classified into three types such as those that derive water from rivers, those that prevent seawater intrusion, and those that link to a main irrigation canal. The classification is based on various conditions including topography, reservoir location, irrigation facilities, and river and alluvial deposit distributions. Agricultural groundwater upstream of subsurface dams is obtained from four to five radial collector wells. From the study, the total amount of groundwater recovered from the subsurface dam is turned out to be about 29~44% of the total irrigation water demand, which is higher than that of general agricultural groundwater of about 4.6%.

Three-dimensional geostatistical modeling of subsurface stratification and SPT-N Value at dam site in South Korea

  • Mingi Kim;Choong-Ki Chung;Joung-Woo Han;Han-Saem Kim
    • Geomechanics and Engineering
    • /
    • 제34권1호
    • /
    • pp.29-41
    • /
    • 2023
  • The 3D geospatial modeling of geotechnical information can aid in understanding the geotechnical characteristic values of the continuous subsurface at construction sites. In this study, a geostatistical optimization model for the three-dimensional (3D) mapping of subsurface stratification and the SPT-N value based on a trial-and-error rule was developed and applied to a dam emergency spillway site in South Korea. Geospatial database development for a geotechnical investigation, reconstitution of the target grid volume, and detection of outliers in the borehole dataset were implemented prior to the 3D modeling. For the site-specific subsurface stratification of the engineering geo-layer, we developed an integration method for the borehole and geophysical survey datasets based on the geostatistical optimization procedure of ordinary kriging and sequential Gaussian simulation (SGS) by comparing their cross-validation-based prediction residuals. We also developed an optimization technique based on SGS for estimating the 3D geometry of the SPT-N value. This method involves quantitatively testing the reliability of SGS and selecting the realizations with a high estimation accuracy. Boring tests were performed for validation, and the proposed method yielded more accurate prediction results and reproduced the spatial distribution of geotechnical information more effectively than the conventional geostatistical approach.

Validation of a new magnetometric survey for mapping 3D subsurface leakage paths

  • Park, DongSoon;Jessop, Mike L.
    • Geosciences Journal
    • /
    • 제22권6호
    • /
    • pp.891-902
    • /
    • 2018
  • Techniques for more reliable detection of 3D subsurface flow paths are highly important for most water-related geotechnical projects. In this case study, a magnetometric resistivity method with a new approach and state-of-the-art technology ("Willowstick survey") was applied to the testbed dam (YD dam) site, and its applicability was validated by geotechnical investigation techniques including borehole drilling and sampling, Lugeon test, flow direction and velocity test, and seismic tomography. In addition to the magnetometric survey, a 3D electrical resistivity survey was performed independently and the results were compared and discussed. The electrical resistivity survey was effective in detecting groundwater levels, but it was limited in mapping leakage paths. On the other hand, the Willowstick magnetometric survey effectively detected geologic weaknesses (e.g., fault fracture) and potential leakage paths of the dam site foundation rocks. The results of this research are expected to be effective for water infrastructures where leakage is an important issue.

지하댐 설치에 의한 수자원 개발량 평가 (Assessment of water resources by the construction of subsurface dam)

  • 김상준
    • 한국수자원학회논문집
    • /
    • 제50권11호
    • /
    • pp.795-802
    • /
    • 2017
  • 본 연구는 지하댐에 의한 수자원 개발량을 평가하는 방법론을 제시한다. 연구 대상지역으로 선택한 쌍천 지하댐은 동해안 쌍천유역 하구에 위치하며 비피압 충적 대수층을 형성하고 있다. 동해안에는 지형적으로 유사한 지하댐 후보지가 여러 개 존재한다. 본 연구에서는 대수층의 지하수위를 평면 2차원 FDM 모형으로 산출하였으며, 여기서 유역 유출은 대수층 표면에 침투항으로서 입력된다. 3개의 유역 유출모형의 평균으로서, 기저유량은 $0.5m^3/sec$로 산출되었다. 그리고 이 기저유량 근처의 유입량을 갈수기 유입으로 간주하여, 유입량 및 양수량 변화에 따른 지하수위를 산출하는 방법으로 수자원 개발량을 평가하였다. 구체적으로는 현재 속초시 생활용수를 공급하고 있는 실제 양수량($28,000m^3/day$)을 적용하여, 우물 수위가 대수층 바닥에 도달하거나 지하수위가 대수층 표면을 상회하여 지표수 흐름이 발생하는 유입량을 추정하였다. 또한 수자원 개발량을 증대시키기 위하여 우물의 양수량을 증가시키거나 추가 우물을 설치하는 상황을 재현하고, 극심한 갈수기에 가능한 양수량을 산출하였다.

해안지역 지하수댐 염수침입 방지기술 개선 방안 (Countermeasure to Prevent Seawater Intrusion on Coastal Area)

  • 부성안;이기철;김진성;정교철;고양수
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
    • /
    • pp.148-154
    • /
    • 2002
  • Groundwater Dam is one of the reliable techniques to get huge amount of groundwater abstraction for municipal, agricultural, drinking, industrial water supply system. It can be a major technique to solve water shortage problems when it based on the sufficient watershed, proper topology, and adequate aquifer distribution and pollution control. It is suggested that the two consecutive underground wall in the coastal area to prevent seawater intrusion beneath a single wall.

  • PDF

용담댐 발전소 접지설계를 위한 대지비저항 모델링 및 접지저항 추정 (Earth Resistivity Modelling and Grounding Resistance Estimation for Yongdam Dam Power Station Grounding Design)

  • 오민환;김형수;김종득
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 C
    • /
    • pp.1188-1191
    • /
    • 1998
  • Detailed estimation of subsurface resistivity distribution and accurate estimation of actual fault current coming into the grounding system are indispensible to optimun grounding system design. Especially, it is essential for efficient grounding design to estimate subsurface resistivity distribution quantitatively and logically. Accurate estimation of subsurface resistivity distribution has an absolute influence on calculating touch voltage, step voltage and ground potential rise (GPR) which are related with grounding design standard for human safety. In this study, thirty-three electrical sounding surveys were made in Yongdam Power Station to obtain detailed subsurface resistivity distribution and the sounding data were interpreted quantitatively using multi-layered model. The results of the quantitative resistivity models were adopted practically to calculate grounding resistance values. Analytical asymptotic equations and CDEGS program were used in grounding resistance calculation and the results were compared and reviewed in the study.

  • PDF

필댐의 안정성 해석 연구 (1) (A STUDY ON THE SAFETY ANALYSIS OF ROCK FILL DAM (1))

  • 손호웅;이대근
    • 지구물리
    • /
    • 제6권3호
    • /
    • pp.165-177
    • /
    • 2003
  • 필댐의 안정성 해석에 있어서 누수와 내부침식은 매우 중요한 평가의 한 부분이다 연구대상 지역의 필댐은 내부침식으로 추정되는 댐 상부의 공동발생 및 과대 누수량으로 문제가 발생하여, CGS(compaction grouting system)으로 보강공사를 수행하였으며, 본 보강방법은 주입재료 및 주입압력이 중요한 변수로 작용을 한다. 본 연구에서는 CGS 보강이 필댐의 안정성에 미치는 영향을 CGS보강 전후에 지구물리탐사를 수행하여 해석하였다. 본 조사에 적용된 방법에는 전기비저항탐사, 탄성파 굴절법탐사, GPR탐사, HFMT탐사 등이 적용되었다. 조사결과 CGS 보강으로 댐의 전제척인 거동에 많은 영향을 준 것으로 나타났으며, 주입압력이 과대하여 댐 중심코아에 많은 변위가 발생된 것을 확인할 수 있었다.

  • PDF

한강수계 유역유출 분석 모형 구축(II) - 모델구성을 중심으로- (Development of Rainfall-Runoff Model on Han River(II) - Model Construction -)

  • 맹승진;찬다 트리베디
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
    • /
    • pp.788-791
    • /
    • 2008
  • 본 연구에서는 한강수계의 소유역을 24개로 분할하였고 강우의 공간 분포를 작성하기 위해 151개의 강우관측소를 이용하여 강우자료를 정리하였다. 한강수계의 주요 제어지점으로 소양강댐, 충주댐, 충주조정지댐, 횡성댐, 화천댐, 춘천댐, 의암댐, 청평댐, 팔당댐을 선정하였다. SSARR(Streamflow Synthesis and Reservoir Regulation) 모형을 기반모형으로 선정하여 모형의 입력자료를 작성하고 2002년의 수문자료를 이용하여 매개변수의 민감도분석을 수행하였다. 민감도 분석 결과, 유역유출과 관련된 매개변수 중 토양습윤상태별 유출율, 침투량별 지하수유입률 및 지표수와 복류수를 분리하는 매개변수가 비교적 큰 민감도를 나타내었다.

  • PDF

고정밀 중력탐사를 이용한 천부 지질구조 조사 사례 (Case Stories of Microgravity Survey for Shallow Subsurface Investigation)

  • 박영수;임형래;임무택;구성본;김학수;오석훈
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2005년도 공동학술대회 논문집
    • /
    • pp.181-186
    • /
    • 2005
  • 중력탐사는 지하의 밀도 분포를 구하는 탐사법이므로 지하의 빈 공간의 탐지나 기반암의 견고성을 파악하는 데 직접적인 정보를 제공하므로, 고정밀 중력탐사는 지하공동, 터널, 채굴적 등의 탐지에 효과적으로 적용될 수 있다. 이 논문은 석회암 공동 탐지, 폐갱도 탐지 그리고 사력댐의 밀도 구조 등 3가지 실제 탐사 사례를 통하여 고정밀 중력탐사가 천부 토목 조사와 구조물 안정성 조사에 유용하게 활용됨을 보여주고자 한다.

  • PDF