• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1504-1507
• /
• 2009

In this paper, the etching behavior of ZnO in $CF_4$ plasma mixed Ar was investigated. Previously, the etch rate in $CF_4$/Ar plasma was reported that it is slower than that in Cl containing plasma. But, plasma included Cl atom can produce the by-product such as $ZnCl_2$. In order to solve this film contamination, no Cl containing etching gas is required. We controlled the etching parameter such as source power, substrate bias power, and $CF_4$/Ar gas ratio to acquire the fast etch rate using a ICP etcher. We accomplished the etching rate of 144.85 nm/min with the substrate bias power of 200W. As the energetic fluorine atoms were bonded with Zinc atoms, the fluoride zinc crystal ($ZnF_2$) was observed by X-ray photoelectron spectroscopy (XPS).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.569-572
• /
• 2000

This paper presents the optimized fabrication and thermal characteristics of micro-heaters for thermal MEMS applications using a SDB SOI substrate. The micro-heater is based on a thermal measurement principle and contains for thermal isolation regions a 10$\mu\textrm{m}$ thick silicon membrane with oxide-filled trenches in the SOI membrane rim. The micro-heater was fabricated with Pt-RTD(Resistance Thermometer Device)on the same substrate by using MgO as medium layer. The thermal characteristics of the micro-heater with the SOI membrane is 280$^{\circ}C$ at input Power 0.9 W; for the SOI membrane with 10 trenches, it is 580$^{\circ}C$ due to reduction of the external thermal loss. Therefore, the micro-heater with trenches in SOI membrane rim provides a powerful and versatile alternative technology for improving the performance of micro thermal sensors and actuators.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.98-98
• /
• 2000

초고집적(ULSI) 반도체 소자의 multilevel metalization을 위한 중간 유저네로서 저 유전상수(k<)와 높은 열적안정성(>45$0^{\circ}C$)을 갖는 새로운 물질을 도입하는 것이 필요하다. 중합체 박막은 낮은 유전상수와 높은 열적 안정성으로 인하여 low-k 물질로 적당하다고 여겨진다. PECVD에 의한 plasma polymer 박막의 증착은 많이 보고되어 왔으마 고밀도 플라즈마 형성이 가능하고 기판으로 유입되는 ion의 energy 조절이 가능한 inductively coupled plasma(ICP) CVD에 의한 plasma polymer 박막에 대한 연구는 보고된 바 없다. 본 연구에서는 Mtehyl-cyclohexane precusor를 사용하여 substrate에 bias를 주면서 inductively coupled plasma(ICP)를 이용하여 플라즈마 폴리머 박막(plasma polymerized methyl-cyclohexane : 이하^g , pp MCH라 칭함)을 증착하였으며 ICP power와 substrate bias(SB) power가 증착된 박막의 특성에 어떠한 영향을 미치는지 알아보았다. 증착된 박막의 유전상 수 및 열적 안정성은 ICP power의 변화에 비해 SB power의 변화에 더 크게 영향을 받았다.^g , pp MCH 박막은 platinum(Pt) 기판과 silicon 기판위에서 같이 증착되었다. Methyl-cyclohexane precursor는 4$0^{\circ}C$로 유지된 bubbler에 담겨지고 carrier 가스 (H2:10%, He:90%)에 의해 reactor 내부로 유입된다.^g , pp MCH 박막은 증착압력 350 mTorr, 증착온도 6$0^{\circ}C$에서 \circled1SB power를 10W에 고정시키고 ICP power를 5W부터 70W까지, \circled2ICP power를 10W에 고정시키고 SB power를 5W부터 70W까지 변화하면서 증착하였다. 유전 상수 및 절연성은 Al/PPMCH//Pt 구조의 capacitor를 만들어서 측정하였으며, 열적 안정성은 Ar 분위기에서 30분간의 열처리 전후의 두께 변화를 측정함으로써 분석하였다. SB power 10W에서 ICP power가 5W에서 70w로 증가함에 따라 유전상수는 2.65에서 3.14로 증가하였다. 열적 안정성은 ICP power의 증가에 따라서는 크게 향상되지 않은 것으로 나타났다. ICP power 10W에서 SB power가 5W에서 70W로 증가함에 따라 유전상수는 2.63에서 3.46으로 증가하였다. 열적 안정성은 SB power의 증가에 따라 현저하게 향상되었으며 30W 이상에서 증착된 박막은 45$0^{\circ}C$까지 안정하였고, 70W에서 증착된 박막은 50$0^{\circ}C$까지 안정하였다. 열적 안정성은 ICP power의 증가에 따라서는 현저하게 향상되었다. 그 원인은 SB power의 인가에 의해 활성화된 precursor 분자들이 큰 에너지를 가지고 기판에 유입되어 치밀한 박막이 형성되었기 때문으로 사료된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.155.2-155.2
• /
• 2013

Strain-relaxed SiGe layer on Si substrate has numerous potential applications for electronic and opto- electronic devices. SiGe layer must have a high degree of strain relaxation and a low dislocation density. Conventionally, strain-relaxed SiGe on Si has been manufactured using compositionally graded buffers, in which very thick SiGe buffers of several micrometers are grown on a Si substrate with Ge composition increasing from the Si substrate to the surface. In this study, a new plasma process, i.e., the combination of PIII&D and HiPIMS, was adopted to implant Ge ions into Si wafer for direct formation of SiGe layer on Si substrate. Due to the high peak power density applied the Ge sputtering target during HiPIMS operation, a large fraction of sputtered Ge atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed Ge plasma, the ion implantation of Ge ions can be successfully accomplished. The PIII&D system for Ge ion implantation on Si (100) substrate was equipped with 3'-magnetron sputtering guns with Ge and Si target, which were operated with a HiPIMS pulsed-DC power supply. The sample stage with Si substrate was pulse-biased using a separate hard-tube pulser. During the implantation operation, HiPIMS pulse and substrate's negative bias pulse were synchronized at the same frequency of 50 Hz. The pulse voltage applied to the Ge sputtering target was -1200 V and the pulse width was 80 usec. While operating the Ge sputtering gun in HiPIMS mode, a pulse bias of -50 kV was applied to the Si substrate. The pulse width was 50 usec with a 30 usec delay time with respect to the HiPIMS pulse. Ge ion implantation process was performed for 30 min. to achieve approximately 20 % of Ge concentration in Si substrate. Right after Ge ion implantation, ~50 nm thick Si capping layer was deposited to prevent oxidation during subsequent RTA process at $1000^{\circ}C$ in N2 environment. The Ge-implanted Si samples were analyzed using Auger electron spectroscopy, High-resolution X-ray diffractometer, Raman spectroscopy, and Transmission electron microscopy to investigate the depth distribution, the degree of strain relaxation, and the crystalline structure, respectively. The analysis results showed that a strain-relaxed SiGe layer of ~100 nm thickness could be effectively formed on Si substrate by direct Ge ion implantation using the newly-developed PIII&D process for non-gaseous elements.

• 센서학회지
• /
• 제4권2호
• /
• pp.58-63
• /
• 1995

$SiH_{4}$와 $NH_{3}$의 RF 글로우방전 분해에 의한 PECVD법으로 a-SiNx:H박막을 제조하고 기판온도, RF 전력, 그리고 $NH_{3}/SiH_{4}$ 유량비 등의 변화에 따른 a-SiNx:H 박막의 유전상수와 광학적 밴드갭 등을 조사하였다. a-SiNx:H막의 유전상수와 광학적 밴드갭은 기판온도, RF 전력 및 $NH_{3}/SiH_{4}$ 유량비 등의 증착변수에 따라 크게 변화하였다. 기판온도가 증가할수록 a-SiNx:H막의 유전상수는 증가하였으며 광학적 밴드갭은 감소하였다. 기판온도, RF 전력, 가스압력, $NH_{3}/SiH_{4}$ 유량비 및 두께를 각각 $250^{\circ}C$, 20 W, 500 mTorr, 10 및 $1500\;{\AA}$로 하였을 때 a-SiNx:H막의 유전상수, 절연파괴전장 및 광학적 밴드갭은 각각 4.3, 1 MV/cm 및 2.9 eV로 나타났다.

• 센서학회지
• /
• 제30권4호
• /
• pp.267-272
• /
• 2021

In this study, Ag was deposited to investigate its applicability as a surface-enhanced Raman scattering substrate after forming a grass-type black silicon structure through maskless reactive ion etching. Grass-structured black silicon with heights of 2 - 7 ㎛ was formed at radio-frequency (RF) power of 150 - 170 W. The process pressure was 250 mTorr, the O₂/SF₆ gas ratio was 15/37.5, and the processing time was 10 - 20 min. When the processing time was increased by more than 20 min, the self-masking of Si_xO_yF_z did not occur, and the black silicon structure was therefore not formed. Raman response characteristics were measured based on the Ag thickness deposited on a black silicon substrate. As the Ag thickness increased, the characteristic peak intensity increased. When the Ag thickness deposited on the black silicon substrate increased from 40 to 80 nm, the Raman response intensity at a Raman wavelength of 1507 / cm increased from 8.2 × 10³ to 25 × 10³ cps. When the Ag thickness was 150 nm, the increase declined to 30 × 10³ cps and showed a saturation tendency. When the RF power increased from 150 to 170 W, the response intensity at a 1507/cm Raman wavelength slightly increased from 30 × 10³ to 33 × 10³ cps. However, when the RF power was 200 W, the Raman response intensity decreased significantly to 6.2 × 10³ cps.

• 한국재료학회지
• /
• 제15권10호
• /
• pp.621-625
• /
• 2005

Effects of rf power, pressure, sputtering gas composition, and substrate temperature on the deposition rate of the $WC_x$ coatings were investigated. The effects of rf power and sputtering gas composition on the hardness and corrosion resistance of the $WC_x$ coatings deposited by reactive sputtering were also investigated. X-ray diffraction (XRD) and Auger electron spectroscopy (AES) analyses were performed to determine the structures and compositions of the films, respectively. The hardnesses of the films were investigated using a nanoindenter, scanning electron microscopy, ana a salt-spray test, respectively. The deposition rate of the films was proportional to rf power and inversely proportional to the $CH_4$ content of $Ar/CH_4$ sputtering gas. The deposition rate linearly increased with increasing chamber pressure. The hardness of the $WC_x$ coatings Increased as rf power increased. The highest hardness was obtained at a $Ar/CH_4$ concentration of $10 vol.\%$ in the sputtering gas. The hardness of the $WC_x$ film deposited under optimal conditions was found to be much higher than that of the electroplated chromium film, although the corrosion resistance of the former was slightly lower than that of the latter.

• Journal of electromagnetic engineering and science
• /
• 제8권3호
• /
• pp.129-133
• /
• 2008

An integrated passive device(IPD) technology by semi-insulating(SI)-GaAs-based fabrication has been developed to meet the ever increasing needs of size and cost reduction in wireless applications. This technology includes reliable NiCr thin film resistor, thick plated Cu/Au metal process to reduce resistive loss, high breakdown voltage metal-insulator-metal(MIM) capacitor due to a thinner dielectric thickness, lowest parasitic effect by multi air-bridged metal layers, air-bridges for inductor underpass and capacitor pick-up, and low chip cost by only 6 process layers. This paper presents the Wilkinson power divider with excellent performance for digital cellular system(DCS). The insertion loss of this power divider is - 0.43 dB and the port isolation greater than - 22 dB over the entire band. Return loss in input and output ports are - 23.4 dB and - 25.4 dB, respectively. The Wilkinson power divider based on SI-GaAs substrates is designed within die size of $1.42\;mm^2$.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.322-327
• /
• 2006

CdS films have been prepared on polycarbonate, polyethylene terephthalate, and Coming 7059 substrates by r.f magnetron sputtering technique at room temperature. A comparison of the properties of the films deposited on polymer and glass substrates was performed. In addition, the influence of the sputter power on the structural and optical properties of these films was evaluated. The XRD measurements revealed that CdS films were polycrystalline and retained the mixed structure of hexagonal wurtzite and cubic phase, regardless of substrate types. As the sputter power was increased from 75 to 150 Watt, the structure of CdS films was converted from the mixed of hexagonal and cubic phase to hexagonal phase. The morphology of CdS films is found to be continuous and dense. Also, the grain of CdS films is larger with increasing the sputter power. The average transmittance exceeded 80 % in the visible spectrum for all films and decreases slightly with the sputter power.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.739-745
• /
• 2015

In this paper, a flexible wireless power receiving system is proposed for wearable device applications. The proposed system is designed with printable component configuration to be integrable to textile material. While the defected ground structures(DGSs) are utilized for planar printable filter designs, direct impedance matching technique is considered for flexible circuit performance. The proposed system has been implemented on a flexible substrate with a thickness of 5 mils, and experimented for power conversion efficiencies and converted voltages. In order to evaluate the hardware flexibility, the system performance are measured a bended circuit board at a radius of curvature of 5 cm. The system performance is analyzed for the degradation due to the curvature. The proposed system has shown the excellent capability of far-field wireless power transfer systems in flexible device environments.