• Journal of Powder Materials
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2022

This study investigates the effect of process stopping and restarting on the microstructure and local nanoindentation properties of 316L stainless steel manufactured via selective laser melting (SLM). We find that stopping the SLM process midway, exposing the substrate to air having an oxygen concentration of 22% or more for 12 h, and subsequently restarting the process, makes little difference to the density of the restarted area (~ 99.8%) as compared to the previously melted area of the substrate below. While the microstructure and pore distribution near the stop/restart area changes, this modified process does not induce the development of unusual features, such as an inhomogeneous microstructure or irregular pore distribution in the substrate. An analysis of the stiffness and hardness values of the nano-indented steel also reveals very little change at the joint of the stop/restart area. Further, we discuss the possible and effective follow-up actions of stopping and subsequently restarting the SLM process.

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.77-84
• /
• 2010

Latex modified concrete (LMC) exhibits improved material properties including high tensile strength and durability compared with conventional concrete, and hence LMC has been used as protective layers over the bridge deck slabs to increase their service life with underlying assumption of excellent bond behavior between the LMC overlay and the concrete substrate. In this study, the effect of the primary parameters of the concrete substrate (i.e., shrinkage, stiffness and cracking capacity) as well as the LMC overlay thickness on the probability of cracking of the bridge deck slabs using LMC overlays was investigated by carrying out the finite element analysis that simulated the bond behavior of LMC overlays on normal strength concrete (NSC) and HPC bridge deck slabs. Based on the results of the numerical analysis, it is concluded that the relatively high shrinkage strains and stiffness of HPC slabs can increase its probability of cracking in bridge deck slabs using LMC overlay.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.100-105
• /
• 1994

Ni-Fe thin films are deposited on the corning glass substrate by means of RF magnetron sputtering system In order to investigate the dependence of the prorerties of Ni-Fe thin films on the film thickness, ferromagnetic reson¬ance spectrum has been examined. The effective magnetization $M_{eff}$ is constant for all samples, while the exchange stiffness constant A increases with the film thickness. A tendency that spectroscopic splitting factor g increases with the sample thickness, we expect that the increase of the contribution of the orbital motion to the magnetic moment as a reason for it.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1275-1289
• /
• 1996

The plane elasticity problem of collinear cracks in a layered medium is investigated. The medium is modeled as bonded structure constituted from a surface layer and a semi-infinite substrate. Along the bond line between the two dissimilar homegeneous constituents, it is assumed that as interfacial zone having the functionally graded, nonhomogeneous elastic modulus exists. The layered medium contains three collinear cracks, one in each constituent material oriented perpendicular to the nominal interfaces. The stiffness matrix formulation is utilized and a set of homogeneous conditions relevant to the given problem is readily satisfied. The proposed mixed boundary value problem is then represented in the form of a system of integral equations with Cauchy-type singular kernels. The stress intensity factors are defined from the crack-tip stress fields possessing the standard square-root singular behavior. The resulting values of stress intensity factors mainly address the interactions among the cracks for various crack sizes and material combinations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.348-352
• /
• 2008

Deformation of the shadow mask is one of the problems encountered during the deposition of organic materials for manufacturing large size organic light emitting diode (OLED). The larger the glass substrate, the larger the shadow mask becomes. As the size of the shadow mask increases, its deformation becomes more severe, thereby making it difficult to deposit organic materials in a precise pattern on a substrate. In this paper, a new method for reducing drooping of the shadow mask for large size OLED vapor depositions is proposed. The proposed shadow mask with cross stripe wires has higher stiffness than the pure shadow mask, which results in reducing drooping of the shadow mask. A commercial FEM program, ANSYS, is used for the evaluation of the proposed shadow mask. The analysis showed that the shadow mask with cross stripe wires have an effect on reducing drooping about 18.6% or more.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1357-1365
• /
• 2002

A robot hand is used to transport the glass substrate in TFT-LCD manufacturing process. Carbon/epoxy composite is one of the best materials for this kind of robot hand application, due to their lightweight, high stiffness, and good damping characteristics. Major requirement of the robot hand is given as allowable deflection under weight loading of glass substrate and robot hand itself. In this thesis, a carbon/epoxy robot hand was analyzed using finite element method and beam theory to determine the deflection of the hand under the loading that is equivalent to actual weight. Because natural frequency is one of the major interests in robot hand design for TFT-LCD manufacturing process, modal analysis is also conducted using finite element method and beam theory. A robot hand was manufactured, and actual deflection and natural frequency were measured to verify the analysis results and compliance to requirement. The test results showed good agreement with analysis results.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.412-417
• /
• 2015

A critical element in tissue engineering approaches is a control of the mechanical properties of polymer scaffolds to regulate cell phenotype, which may lead to clinically successful tissue regeneration. In this study, we hypothesized that gel stiffness could be a key factor to manipulate adhesion and proliferation of different types of cells. RGD-modified alginate gels with various mechanical properties were prepared and used as a substrate for MC3T3-E1 and H9C2 cells. Adhesion and growth rate of MC3T3-E1 cells in vitro were increased in parallel with an increase of gel stiffness. In contrast, those of H9C2 cells were decreased. This approach to control the mechanical properties of polymer scaffolds depending on the cell types may find useful applications in the tissue engineering.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.125-131
• /
• 2014

In order to develop stretchable substrates for wearable packaging applications, the variation behavior of elastic modulus was evaluated for transparent PDMS Sylgard 184 and black PDMS Sylgard 170 as a function of the base/curing agent mixing ratio. Both for Sylgard 184 and Sylgard 170, the true elastic modulus evaluated on a true stress-true strain curve was higher more than two times compared to the engineering elastic modulus obtained from an engineering stres-sengineering strain curve, and their difference became larger with increasing the stiffness of the PDMS. Sylgard 184 exhibited a maximum engineering elastic modulus of 1.74 MPa and a maximum true elastic modulus of 3.57 MPa at the base/curing agent mixing ratio of 10. A maximum engineering elastic modulus of 1.51 MPa and a maximum true elastic modulus of 3.64 MPa were obtained for Sylgard 170 at the base/curing agent mixing ratio of 2.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.539-546
• /
• 2003

The GaN/sapphire layered structure is a potential candidate for high frequency devices due to high acoustic velocity of sapphire. Generally, the GaN thin films are epitaxially grown on c, a, and r-plane sapphire substrates. In this study, wave equations of GaN/sapphire structure were calculated according to crystallographic relationship between GaN layer and sapphire substrate. On each plane, the shear velocity was changed by the kH of GaN layer and propagation direction on sapphire substrate. We found electromechanical coupling constant of r-plane was better than the others. As a result, elastic stiffness and electromechanical coupling constant of materials are affected by a cut and an orientation of substrate. GaN/r-plane sapphire structure is more advantageous for high frequency SAW devices.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.63-67
• /
• 2016

In this paper, we present an indirect method of elastic modulus measurement for various lamination layers formed on polymer-based compliant substrates. Although the elastic modulus of every component is crucial for mechanically reliable microelectronic devices, it is difficult to accurately measure the film properties because the lamination layers are hardly detached from the substrate. In order to resolve the problem, 3-point bending test is conducted with a film-substrate specimen and area transformation rule is applied to the cross-sectional area of the film region. With known substrate modulus, a modulus ratio between the film and the substrate is calculated using bending stiffness of the multilayered specimen obtained from the 3-point bending test. This method is verified using electroplated copper specimens with two types of film-substrate structure; double-sided film and single sided film. Also, common dielectric layers, prepreg (PPG) and dry film solder resist (DF SR), are measured with the double-sided specimen type. The results of copper (110.3 GPa), PPG (22.3 GPa), DF SR (5.0 GPa) were measured with high precision.