• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.728-731
• /
• 2006

Ground subsidence near abandoned underground coal mines has become a serious social problem in Korea. The purpose of this study is to perform a comparative analysis between the ground subsidence area and the electrical resistivity measured by field survey at Samcheok City. A raster database composed of ground subsidence areas and electrical resistivity data was constructed for GIS. To analyze correlation between the two constructed raster datasets, we used a frequency ratio model. The results show that low and high electrical resistivity anomaly zones coincide with the existing subsidence areas. We infer that the high anomaly zone means saturated and low anomaly zone means vacant. It suggests that electrical resistivity might be a useful factor for analyzing ground subsidence hazard zone.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.392-400
• /
• 2013

Joint sets should be considered as an influence factor, when location of subsidence zone by stopes is predicted. And the mechanical properties and distribution patterns of joint set above stopes may be affecting subsidence occurrence. In this study, therefore, the orientation of joint sets is reanalyzed with the data from the previous research on prediction of defining the subsidence zone. From a correlated analysis, the influence of major joint set($J_1$) on subsidence location was analyzed by comparing the angle of assumption with the angle of major joint set($J_1$).

• Tunnel and Underground Space
• /
• v.23 no.1
• /
• pp.31-41
• /
• 2013

Graphical method has been widely applied to the prediction of subsidence area, and is known to have advantages in analysis of trough subsidence which is common in horizontally seamed mine area. However, it is reported that most of the ore bodies in Korea are geologically inclined from sub-horizontal to steep, and therefore, the sinkhole subsidence is frequent in abandoned mine area. For these reasons, it is not to be desired that graphical method is applied for predicting the subsidence occurrence. This paper describes the results of subsidence zone prediction considering the dip direction and the opposite direction of inclined ore bodies from the case studies on the 163 subsidence occurrence regions. The results show also the assumed angle which can define the range of subsidence in the surface area. In conclusion, the limit of this angle is suggested after taking into account the comparison with graphical method and the application to the case histories.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.393-399
• /
• 2020

In this study, the subsidence behavior caused by groundwater ex-flow in a limestone cavity encountered during tunnel excavation was quantified based on numerical analysis and the effect was analyzed. Based on the groundwater level and surface subsidence surveyed at the site, a numerical analysis technique was applied to analyze the characteristics of the subsidence behavior according to the tunnel passage of the geological vulnerabilities. The results of groundwater seepage-coupled analysis were analyzed to reflect the actual ground subsidence behavior. As a result of the study, it was analyzed that the ground subsidence due to the tunnel excavation in the limestone common section(the geological vulnerable zone) was analyzed that the dramatical decrease in groundwater level was the main cause. As a result of numerical analysis, it was analyzed that the long-term cumulative settlement of the asphalt surface after the groundwater ex-flow was 76~118mm due to the reduction of the volume of the soil layer due to the decrease in the groundwater level, and the settlement amount increased as the depth of the soil layer increased.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.109-119
• /
• 2023

Ground subsidence in urban areas due to excessive development and degraded underground facilities is a serious problem. Geophysical surveys have been conducted to estimate the distribution and scale of cavities and subsidence. In this study, electrical resistivity tomography (ERT) was performed near an area of road subsidence in an urban area. The subsidence arose due to groundwater leakage that carried soil into a neighboring excavation site. The ERT survey line was located between the main subsidence area and an excavation site. Because ERT data are affected by rapid topographic changes and surrounding structures, the influence of the excavation site on the data was analyzed through field-scale numerical modeling. The effect of an excavation should be considered when interpreting ERT data because it can lead to wrong anomalous results. A method for performing 2D inversion after correcting resistivity data for the effect of the excavation site was proposed. This method was initially tested using a field-scale numerical model that included the excavation site and subsurface anomaly, which was a loosened zone, and was then applied to field data. In addition, ERT data were interpreted using an existing in-house 3D algorithm, which considered the effect of excavation sites. The inversion results demonstrated that conductive anomalies in the loosened zone were greater compared to the inversion that did not consider the effects of excavation.

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.1
• /
• pp.29-34
• /
• 2017

This Analyzed case study of measuring displacement, implemented laboratory investigation, and in-situ testing in order to interpret ground subsidence risk rating by excavation work. Since geological features of each country are different, it is necessary to objectify or classify quantitatively ground subsidence risk evaluation in accordance with Korean ground character. Induced main factor that could be evaluated and used to predicted ground subsidence risk through literature investigation and analysis study on research trend related to the ground subsidence. Major factors of ground subsidence might be classified by geological features as overburden, boundary surface of ground, soil, rock and water. These factors affect each other differently in accordance with type of ground that's classified soil, rock, or complex. Then rock could be classified including limestone element or not, also in case of the latter it might be classified whether brittle shear zone or not.

• Tunnel and Underground Space
• /
• v.17 no.1 s.66
• /
• pp.66-74
• /
• 2007

The analysis of ground subsidence stability was conducted for the residential area located on the limestone corrosion zone. For the investigation of the cavity distribution in limestone region, various geophysical investigations such as electroresistivity tomography, electromagnetic prospecting are carried out. Geotechnical field tests with drilling are also carried out for the evaluation of the ground characteristics. Based upon their results, numerical modeling is performed for the simulation and prediction of the ground subsidence with the conditions of cavity geometry and groundwater level. The main factor to cause the ground subsidence is estimated as the draw down of the groundwater level below soil overburden, which disturbs the mechanical equilibrium of ground and drives washing away the overburden soil through the cavity and solace subsidence. It seemed that it is essential to maintain the groundwater level continuously above the shallow cavity for the prevention of the ground subsidence on the limestone corrosion zone.

• The Journal of Engineering Geology
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2024

South Korea's mining industry was actively developed until 1980, but subsequent declining profitability forced many mines to close. Most of the abandoned mines are susceptible to persistent subsidence because of the length of time since mining ceased. Accurate prediction of the locations and times of subsidence is difficult; therefore, this study aims to apply continuum analysis to past cases of subsidence to establish a method of predicting the location and magnitude of future subsidence. The study area is an area of ○○ mining located between the Yangsan fault zone and the Moryang fault zone, in which three subsidence events occurred between 2005 and 2009. Drilling surveys and electrical resistivity surveys were performed at subsidence sites determined the distribution of strata, and through laboratory tests obtained the physico-mechanical properties of the rock. Numerical analysis of the results found that the plastic status area includes the areas of actual subsidence and that continuum analysis can also be used to predict the location and magnitude of subsidence caused by mine goaf.

• Geomechanics and Engineering
• /
• v.32 no.3
• /
• pp.245-254
• /
• 2023

Through qualitative analysis and quantitative analysis, the contradictory conclusions about the stability of the settled goaf with two-layer coal seams subject to building load were obtained. Therefore, it is necessary to combine the additional stress method and numerical simulation to further analyze the foundation stability. Through borehole analysis and empirical formula analogy, the height of water-conducting fracture zone in No.4 coal and No.9 coal were obtained, providing the calculation range of water-conducting fracture zone for numerical simulation. To ensure the accuracy of the elastic modulus of broken gangue, the stress-strain curve were obtained by broken gangue compression test in dried state of No.4 coal seam and in soaking state of No.9 coal seam. To ensure the rationality of the numerical simulation results, the actual measured subsidence data were retrieved by numerical simulation. FISH language was used to analyze the maximum building load on the surface and determine the influence depth of building load on the foundation. The critical building load was 0.16 MPa of No.4 settled goaf and was 1.6 MPa of No.9 settled goaf. The additional stress affected the water-conducting fracture zone obviously, resulted in the subsidence of water-conducting fracture zone was greater than that of bending subsidence zone. In this paper, the additional stress method was analyzed by numerical simulation method, which can provide a new analysis method for the treatment and utilization of the settled goaf.

• Economic and Environmental Geology
• /
• v.32 no.3
• /
• pp.217-225
• /
• 1999

Nine cauldrons have been recognized in the PVD (Pusan- Taegu Volcano-tectonic Depression) zone covering an area of nearly 7,000 $km^{2}$. They form characteristic landscape features with various mountains in the southeastern Kyongsang basin. Economically important ore deposits are also developed either in the ring fracture zone or the central pluton within the resurgent cauldrons or in the marginal area of the PVD, suggesting that these cauldrons played a major role in the distribution of ore deposits in the southeastern Kyongsang basin. Furthermore, the cauldron subsidences were more frequent with the more felsic volcano-plutonic complex, possibly indicating that the amounts of water and volatile components also acted as a controlling factor to cause the caldera subsidence and to concentrate the ore-forming elements in economic concentrations. The review of the relationship and variations of ore mineralization and cauldron subsidence is rather sketchy, but it provides a skeleton to carry out more detailed and quantitative studies related to temporal and spatial relationships between each cauldron subsidence accompanying its own ore mineralization. In the southeastern Kyongsang basin, additional calderas and associated ore deposits undoubtedly can be discovered through future detailed studies. The concept that cauldron subsidence are an important control for the formation of ore deposits will appear to be vindicated.