• 상하수도학회지
• /
• 제16권6호
• /
• pp.679-685
• /
• 2002

The objective of this study was investigated for the microbial community structure and treatment performance of domestic wastewater in lab-scale submerged membrane bioreactor operated with anoxic-oxic cycles. Respiratory quinone profiles were applied as tools for identifying different bacterial populations. The cycle time program of bioreactor was control under anoxic/oxic of 60/90 minutes with an hydraulic retention time of 8.4 hrs. The average $COD_{Cr}$ removal efficiency of domestic wastewater was as high as 93%. The results showed complete nitrification of $NH_4^+$-N generated during oxic period and up to 50% of the total nitrogen could be denitrified. The dominant quinone types of suspended microorganisms in bioreactor were ubiquinone (UQ)-8, -10, followed by menaquinone (MK)-6, and MK-7 for anoxic period, but those for oxic period were UQ-8, MK-6, followed by UQ-10 and MK-7. The microbial diversities of bioreactor at anoxic and oxic periods, calculated based on the composition of all quinones were 10.4 and 12.2-11.8, respectively. The experimental results showed that the microbial community structure in the submerged membrane bioreactor treating domestic wastewater was slightly affected by intermittent aeration.

• 생물환경조절학회지
• /
• 제21권3호
• /
• pp.163-169
• /
• 2012

관비재배 및 수경재배시 비료를 녹일 때 소요되는 시간과 노동력을 절감하고, 작업의 안전성 확보와 자동화를 가능하게 할 수 있는 장치의 개발을 위해 본 실험을 실시하였다. 실험은 세 종류로 수행되었다. 먼저, 효과적인 비료용해 방법을 구명하기 위해 수중펌프를 양액 통 속에 두고 양액 통의 입구에 삼베포를 깐 거름망을 설치하여 물을 스프레이하여 비료를 녹이는 방법(Spray), 수중프로펠러를 이용하는 방법(Propeller), 수중펌프를 양액 통 속에 넣어 물의 흐름을 만들어 주는 방법(Submerged), 에어컴프레서를 이용하여 양액 통 속에 공기흐름을 만들어 비료를 용해하는 방법(Airflow) 등 4개의 처리를 두고 실험하였다. Spray 처리에서 가장 시간이 짧게 소요되는 것으로 조사되었으나 농가가 실제로 적용하는데 어려움이 있어서, Spray 처리 다음으로 비료를 녹이는 시간이 짧고, 노동력을 절감할 수 있으며 양액제조 과정을 자동화 하는 것이 용이할 것으로 사료되는 Airflow 처리를 선택하였다. 두 번째 실험에서는 Airflow 처리에서 사용한 재질과 분지관수를 개선한 6지관 및 8지관 장치를 제작하여 비교 실험했는데, 6지관 장치가 비료용해시간이 짧고, 양액탱크의 입구 크기에 관계없이 사용이 가능하며, 제작이 용이하여 가장 효과적인 장치로 판단되었다. 세 번째 실험에서는 개발된 6지관 장치를 이용하여 비료를 용해하는데 소요되는 시간을 조사하여 경제성을 분석하였는데, 농가에서 수중펌프를 이용하여 비료를 용해하는 방법보다 시간은 1/8배 절약할 수 있으며 경제성이 큰 것으로 나타났다. 아울러 $KNO_3$, $Ca(NO_3)_2{\cdot}4H_2O$, Fe-EDTA 등의 용해특성을 조사했다.

• 한국토양비료학회지
• /
• 제23권1호
• /
• pp.34-39
• /
• 1990

염농도(鹽濃度) 0.48%인 식질계(埴質系) 간척지(干拓地) 토양(土壤)에 볏짚과 석고(石膏)를 시용(施用)하고 담수(湛水)한 후 직파시간(直播時間)를 달리한 pot 시험(試驗)에서 벼 유묘(幼苗)의 초기(初期) 생육장해(生育障害) 원인(原因)을 조사(調査)하였다. 1. 발아(發芽)는 담수(湛水) 1일후(日後) 파종구(播種區)가 담수(湛水) 18일후(日後) 파종구(播種區)보다 양호(良好)하였고, 담수(湛水) 18일후(日後) 파종구(播種區)는 볏짚시용(施用)으로 발아율(發芽率)이 극히 불량(不良)하였다. 2. 대조구(對照區)에 비하여 볏짚시용(施用)으로 담수(湛水)중의 pH, $HCO_3{^-}$ 및 Volatile fatty acid 함량(含量)은 증가(增加)되었으나 EC, $SO_4$ 및 수용성(水溶性) 양(陽)이온의 총함량(總含量)은 감소(減少)되었으며, 석고(石膏)는 볏짚과 반대(反對)의 경향을 보였다. 3. 발아율(發芽率)과 담수(湛水)의 화학성분(化學成分) 간(間)에는 대부분 부(負)의 상관관계(相關關係)를 보였으며, 특히 파종(播種) 7일(日) 후(後) 담수(湛水)의 화학성분(化學成分)과 가장 관계(關係)가 높았다. 4. 볏짚시용(施用)에 의한 유묘(幼苗) 발아장해(發芽障害)는 담수(湛水)의 pH 상승(上昇)에 의한 $HCO_3{^-}$의 생성(生成) 및 점토(粘土)의 분산(分散)과 관계(關係)가 깊었으며, 발아후(發芽後) 유묘(幼苗)의 생육장해(生育障害)는 석고시용(石膏施用)으로 담수(湛水)의 EC, $SO_4$ 및 수용성(水溶性) 총양(總陽)이온등의 급격한 증가(增加)로 인한 염류장해(鹽類障害)로 추정(推定)된다. 5. 중탄산(重炭酸)의 생성(生成)은 담수(湛水)의 pH와 유의성(有意性) 있는 2차(次) 곡선적(曲線的) 회귀관계(回歸關係)를 보였으며 pH 7.5 이상일 때 급격한 증가현상(增加現象)을 보였다.

• Journal of Welding and Joining
• /
• 제22권5호
• /
• pp.26-31
• /
• 2004

In order to propose the optimum welding condition for field application, the effects of welding heat input and cooling rate at PWHT on the mechanical properties were investigated. Submerged arc welding of 1.25Cr-0.5Mo steel for pressure vessel was conducted at welding heat inputs of 15.2kJ/cm, 30.9kJ/cm, and 44.8kJ/cm, and cooling rates of 184$^{\circ}C$/hr, 55$^{\circ}C$/hr, and 2$0^{\circ}C$/hr at PWHT. From the test results, as the welding heat input increase up to 30.9kJ/cm, the changes of microstructure and impact toughness were small. At the heat input of 44.8kJ/cm, however, toughness decreased obviously due to the coarsening of coarse-grained HAZ and formation of ferrite at bainite grainboundary of weld metal. On the other hand, cooling rates at PWHT did not effect on the changes in microstructure and mechanical properties. Even though tensile strength and impact toughness at all welding conditions of this study were above the minimum specification requirement, it was confirmed that heat input of 30.9kJ/cm was the optimum welding condition to improve welding performance by higher heat input.

• Journal of Microbiology and Biotechnology
• /
• 제16권3호
• /
• pp.469-474
• /
• 2006

Partial nitrification blocking of the oxidation of nitrite ($NO_{2}^{-}$) to nitrate ($NO_{3}^{-}$) has cost-efficient advantages such as lower oxygen and organics demand for nitrification and denitrification, respectively. A nitrifying membrane bioreactor of submerged type was operated for the treatment of synthetic ammonium wastewater with the purpose of nitrite build-up without affecting the efficiency of ammonium oxidation. A high ammonium concentration (1,000 mg/l) was completely converted to nitrate at up to 2 kg $N/m^3$ day under sufficient aeration. The control of pH under sufficient aeration was not a reliable strategy to maintain stable nitrite build-up. When the dissolved oxygen concentration was kept at 0.2-0.4 mg/l by adjusting the aeration rate, about 70% of nitrite content was obtained with ammonium oxidation efficiency higher than 93%. The increase of suction pressure due to membrane fouling was not significant under lowered aerating environment over a 6-month period of operation. The composition of nitrifier community, including relative abundance of nitrite oxidizers in a nitrite-accumulating condition, was quantified by fluorescence in situ hybridization analysis.

• Membrane and Water Treatment
• /
• 제3권3호
• /
• pp.141-149
• /
• 2012

The aeration provided in a Submerged Membrane Bioreactor (SMBR) improves membrane filtration by creating turbulence on the membrane surface and reducing membrane resistance. However, conventional hollow fiber membrane modules are generally packed in a vertical orientation which limits membrane scouring efficiency, especially when aeration is provided in the axial direction. In the present research, 3 innovative hollow-fiber membrane modules, each with a different membrane orientation, were developed to improve membrane scouring efficiency and enhance permeate flux. Pilot testing was performed to investigate the permeate flux versus time relationship over a 7-day period under different intermittent modes. The results indicated that the best module experienced an overall permeate flux decline of 3.3% after 7 days; the other two modules declined by 13.3% and 18.3%. The lower percentage of permeate flux decline indicated that permeate productivity could be sustained for a longer period of time. As a result, the operational costs associated with membrane cleaning and membrane replacement could be reduced over the lifespan of the module.

• 대한토목학회논문집
• /
• 제11권1호
• /
• pp.189-196
• /
• 1991

본(本) 연구(硏究)에서는 침지형(浸漬型) 생물막(生物膜) 반응조(反應槽)에서 온도(溫度)의 변화(變化)가 미생물(微生物) 성상(性狀)과 처리효율(處理効率)에 미치는 영향(影響)을 구명(究明)하였다. 침지형(沈漬型) 생물막(生物膜) 반응조(反應槽)에서 온도와 매체충전율(媒體充塡率)을 변화시켜 얻어진 연구결과를 요약(要約)하면 다음과 같다. 1. 생물막(生物膜) 밀도(密度), 부착미생물량(附着微生物量), 생물막(生物膜)두께는 온도(溫度)와 매체충전량(媒體充塡量)의 변화에 상당한 영향을 받는다. 2. 반응조 내의 총(總) 미생물(微生物) 중 부유미생물(浮遊微生物)이 차지하는 비율은 약 10-50%로 부유미생물(浮遊微生物)이 기질제거(基質除去)에 관여하는 역할을 무시할 수 없음이 입증되었다. 3. 온도와 총 미생물농도에 따른 BOD 제거효율(除去効率)을 나타내는 관계식을 유도할 수 있었다. 4. 본 공법(工法)은 온도변화에 강(強)한 편으로, Van't Hoff-Arrhenius 변형식(變形式)을 이용하여 구(求)한 온도보정계수(溫度補正係數)는 1.042이었다.

• 멤브레인
• /
• 제26권6호
• /
• pp.470-479
• /
• 2016

담체가 투여된 침지형 막결합 연속회분식 반응기(SMSBR)를 사용한 하수의 고도처리에서 담체가 여과성능과 제거효율에 미치는 영향을 조사하였다. 담체는 반응기 부피 기준으로 10% 투여하였고, 담체와 분말활성탄을 첨가하지 않은 반응기, 분말활성탄(10 g/L)만을 첨가한 반응기 및 담체와 분말활성탄을 모두 첨가한 반응기를 대조군으로 하였다. COD, T-N 및 T-P에 대한 제거효율은 담체 및 분말활성탄 첨가 유무에 따라 큰 차이가 없었다. 그러나 담체를 첨가하지 않은 경우 막간차압(TMP)은 급격히 증가하였으나, 담체를 첨가한 경우에 막간차압은 매우 서서히 증가하였다. 담체를 투여한 SMSBR를 사용하여 하수를 고도처리 할 때, 91일 이상의 운전기간 동안 막 세정 없이 운전이 가능하였다. 담체만을 투여한 경우, 운전 80일 경과 이후의 COD, T-N 및 T-P 평균 제거율은 각각 95.0, 69.3% 및 51.4%이었다.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.273-279
• /
• 2008

Space separation method that use independent reactor for nitrification and other reactor for denitrification has been commonly used for biological nitrogen removal process like $A^2O$ process. However, this method needs large space and complicate pipelines and time separation method such as SBR process have a difficulty in continuous treatment. Thus biological nitrogen removal process which is capable of continuous treatment, easy opeation and space saving is urgently required. In this research, submerged moving media was used for a biofilm process and suspended sludge was used for biological nitrogen removal at the same time. In particular DO environment by controlling air flow rate was investigated for simultaneous nitrification/denitrification. Total nitrogen removal in aeration rate more than $67L/min{\cdot}m^3$ showed 51~53% and rose to 65%, 70% and 78% in $50L/min{\cdot}m^3$, $58L/min{\cdot}m^3$ and $25L/min{\cdot}m^3$ respectively. Total phosphorus removal was very low about 10~20% more than $67L/min{\cdot}m^3$ aeration rates. But total phosphorus removal roses when reduces aeration rate by $58L/min{\cdot}m^3$ low and it showed total phosphorus removal of 72% in aeration rate $25L/min{\cdot}m^3$.

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.658-664
• /
• 2004

To find a new utilization of rice bran, nine higher fungi were examined for the production of exo-biopolymer with macrophage stimulating activity from rice bran. Among the exo-biopolymers produced from submerged cultures, Lentinus edodes showed the highest activity, followed by Grifola frondosa, Schizophyllum commune, and Coriolus versicolor. L. edodes also had the most potent macrophage stimulating activity in a liquid culture rather than in a solid culture. In order to improve rice bran utilization and the yield of exo-biopolymer with macrophage stimulating activity, the treatment of Rapidase effectively increased the macrophage stimulating activity (about 30% increase), whereas the other enzymes (Econase, Viscozyme, Ultraflo, Celluclast, and Thermylase) treatments did not increase the macrophage stimulating activity. Exo-biopolymer with macrophage stimulating activity from L. edodes contained mainly neutral sugars (58.7%) with considerable amounts of uronic acid (32.2%) and a small amount of proteins (9.1%). Component sugars of exo-biopolymer consisted of mainly arabinose, galactose, glucose, mannose, and xylose (0.95:0.81:0.96:1.00:0.39, respectively). When the exo-biopolymer was treated with $NaIO_4, NaClO_2$, and pronase, the $NaClO_2$ treatment and pronase digestion had little effect, whereas $NaIO_4$ oxidation significantly decreased the macrophage stimulating activity (47.6% reduction at $100\mug/ml$). Therefore, the carbohydrate moiety in exo-biopolymer from L. edodes plays an important role in the expression of the macrophage stimulating activity.