• 제목/요약/키워드: Subgingival margin

검색결과 13건 처리시간 0.04초

치은연하 변연을 가지는 맞춤형 지대주에서 디지털 중첩기술을 이용한 인상채득술의 임상 적용 증례 (Clinical accuracy of impression technique using digital superimposition of customized abutment with subgingival margin: A case report)

  • 김진완;정창모;윤미정;이소현;이현종;허중보
    • 대한치과보철학회지
    • /
    • 제58권2호
    • /
    • pp.169-175
    • /
    • 2020
  • 임플란트 상부 보철물 제작 시 치은연하 변연을 가지는 맞춤형 지대주의 인상채득을 위해 전통적으로 치은 압배술이 실시되어 왔다. 하지만 치은 압배술은 치은 퇴축 등의 부작용이 있으며 출혈은 부정확한 인상채득의 원인이 될 수 있다. 본 증례에서는 이러한 문제점들을 해결하기 위해 보철물을 제작할 때 중첩 가능하도록 제작된 맞춤형 지대주를 이용하는 새로운 방법을 적용하였다. 지대주를 임플란트에 연결하기 전 형상데이터를 저장하고, 임플란트에 연결 후 치은 압배 과정 없이 광학 인상채득한 뒤 두 데이터를 중첩하여 상부보철물을 제작하였다. 치은 연하 변연을 가지는 임플란트 보철물 제작 시 심미성을 만족시키면서 기존의 인상채득 방식보다 빠르고 간편하며 우수한 변연 및 내면적합도를 보였기에 임상적 효용성에 대해 보고하고자 한다.

치은연하 치석의 침착양상에 관한 연구 (A STUDY ON THE DEPOSITION PATTERN OF SUBGINGIVAL CALCULUS)

  • 강인구;김병옥;한경윤
    • Journal of Periodontal and Implant Science
    • /
    • 제24권1호
    • /
    • pp.1-14
    • /
    • 1994
  • Dental calculus which is calcifing and/or calcified dental plaque is divided into supragingival calculus and subgingival calculus according to the position of deposit to gingival margin. Subgingival calculus has more important clinical significance in diagnosis and treatment of periodontal disease than supragingival calculus. In order to investigate the deposition pattern of subgingival calculus on each root surface of different tooth type, extracted 192 teeth due to excessive destruction of periodontal tissue were divided according to tooth type and the deposition pattern of subgingival calculus was classified into linear type, veneer type, scattered type, and aggregated type according to the configuration and the extent of deposit. The difference of percentage between each deposition pattern was statistically analyzed by Chi-Square test. Following results were obtained : l. In maxillary incisors, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(45.5%, 36.4%) and palatal(36.4%, 36.4%) root surface, aggreated type(72.7%) was on mesial surface, and aggregated type(54.5%) and scattered type(36.4%) was on distal suface. 2. In mandibular incisors, scattered type, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(33.3%, 30.6%, 27.8%) and lingual(36.1%, 30.6%, 25.0%) root surface, aggregated type(33.3%), scattered type(27.8% ), and veneer type(27.8%) were on mesial surface, and aggregated type(38.9%) and scattered type(33.3%) on distal surface. 3. In maxillary peremolars, the predominant deposition patterns of subgingival calculus were linear type(28.6%) on buccal root suface, scattered type(35.7%) and linear type(28.6%) on palatal surface, scattered type(39.3%) on mesial surface, aggregated type(46.4%) on distal surface, and aggregated type(53.6%) on furcation area. 4. In mandibular premolars, scattered type was predominant deposition pattern of subgingival calculus on buccal(39.3%) and lingual(50.0%) root surface, scattered type(32.1%) and aggregated type(32.1% ) were on mesial surface, and aggregated type(42.9%) was on distal surface. 5. In maxillary molars, aggregated type(40.0%) and scattered type(32.5%) were predominat deposition pattern of subgingival calculus on buccal root surface, aggregated type was on distal(40.0%) and furcation area(50.0%), but there was no predominat pattern on palatal and mesial root surfaces. 6. In mandibular molars, aggregated type(39.5%) and scattered type(28.9%) were predominant deposition patterns of subgingival calculus on buccal root surface, aggregated type(36.8%) was on lingual surface, linear type(39.5%) and aggregated type(34.2%) were on furcation area, but there was no predominant pattern on mesial and distal root surfaces.

  • PDF

Class V restorations expended to the subgingival margin

  • Ha, Jin-Hee;Kim, Hyeon-Cheol;Hur, Bock;Park, Jeong-Kil
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2007년도 Autumn Scientific Meeting(the 128th) of Korean Academy of Comservative Dentistry
    • /
    • pp.632-632
    • /
    • 2007
  • PDF

구 보철물 치경부 변색의 심미 재수복 (- Esthetic Retreatment of Old Restorations with Cervical Discolorations -)

  • 김학수;김욱중;조문상;이종엽
    • 대한심미치과학회지
    • /
    • 제11권2호
    • /
    • pp.33-36
    • /
    • 2002
  • As patients have concerned the esthetics of dental restorations, the porcelain fused to metal restorations have gain their popularity due to their strength and esthetic appearance for many years. However, metal collar in subgingival level of porcelain fused to metal restoration often causes black shadows. Inadequately positioned metal collar causes plaque depositions, gingival inflammations, black shadows, and discolorations of margin area. Those problems can be avoided by a clear finishing line, well-fabricated provisional restorations with precise margin and fine polishing, collarless porcelain fused to metal restoration, and all ceramic restoration. In this case report, collarless porcelain fused to metal restoration was used to treat cervical discoloration from old restorations.

  • PDF

임플란트 보철 합착 시 잔여 시멘트 최소화를 위해 열가소성 접착제를 이용한 복제 지대주 제작 방법: 증례보고 (A technique for fabricating abutment replica with hot melt adhesive material to minimize residual cement in implant restoration: a case report)

  • 서치원;한아름;서재민;이정진
    • 구강회복응용과학지
    • /
    • 제32권3호
    • /
    • pp.240-245
    • /
    • 2016
  • 치은 연하 변연을 갖는 임플란트 수복물 장착시 잔여 합착제의 제거는 임플란트 생물학적 합병증을 예방하기 위해 매우 중요하다. 치은 연하 잔여 합착제를 최소화하기 위해 인상용 실리콘이나 자가중합형 레진을 이용하여 복제 지대주를 제작하는 여러 방법이 소개되었다. 본 증례에서는 열가소성 접착제(hot melt adhesive material)를 이용하여 복제 임플란트 지대주(abutment replica)제작하는 방법을 소개하고자 한다. 이 방법은 간단하고 부가적인 기공과정이 필요 없어 진료실에서 쉽게 이용할 수 있어 이에 보고하는 바이다.

치주염이환 치아표면에 부착된 치석과 치주조직의 형태 계측학적 연구 (Morphometric study of the calculus and periodontal tissues adhered to the root surfaces in periodontitis)

  • 김종관;이승원
    • Journal of Periodontal and Implant Science
    • /
    • 제27권3호
    • /
    • pp.621-631
    • /
    • 1997
  • To verify the effect of subgingival calculus on the periodontal tissues in periodontitis and the effectiveness of supragingival scaling to remove the calculus, 30 teeth from healthy group (Probing pocket depth:$PPD{\leq}mm$: HP group), 15 teeth from moderate group ($4{\leq}PD<7mm$:MP group), 30 teeth from advanced group (PPD>7mm: AP group) were selected and supragingival scaling was performed before extraction of all experimental teeth. After careful extraction, the teeth were cleaned with saline and disclosed with toluidine blue and carefully examined the relationship and distance between the calculus attached on the root surface and periodontal tissues. As a result, it was; 1. The calculus was not discovered on the root surface of teeth in HP group, but was in MP and AP group, mostly on interproximal surface and furca area. The shape of the attached calculus was ovoid, trepazoid and polygonal and the calculus was distributed randomly over the root surface. 2. PPD was more than the distance between the gingival margin to the level of attached connective tissue in AP group rather than in HP and MP group. 3. The length of calculus was $2.7mm{\pm}.44mm$ in HP group and $4.1{\pm}.89in$ AP group. 4. The distance between the apical margin of calculus and the level of attached connective tissue was $2.4{\pm}.33mm$ in MP group and $3.4{\pm}.89mm$ in AP group. 5. The length of subgingival calculus was tended to increase in relation to the probing pocket depth. Therefore, it can be concluded, the calculus in periodontal pocket can not be removed completely with supragingival scaling. As the terminal part of calculus was far away with limited distance from the periodontal tissue, it can be said that the calculus was not a direct factor in destroying the periodontal tissue. In this study, the extent of the plaque was not verified but the location of calculus can be used in clinical practice for complete removal of calculus when the distance relation bewteen calculus and plaque will be known.

  • PDF

진료자세가 고정성 국소의치의 지대치 삭제에 미치는 영향 (An influence of operator's posture on the shape of prepared tooth surfaces for fixed partial denture)

  • 원인재;권긍록;배아란;최대균
    • 대한치과보철학회지
    • /
    • 제49권1호
    • /
    • pp.38-48
    • /
    • 2011
  • 연구 목적: 본 연구는 고정성 국소의치 제작을 위한 상악 좌측 제2소구치 및 제2대구치의 지대치 삭제에 대하여 인체공학적으로 안정된 진료 자세를 확립하고, 치과의사의 일반적 작업 자세와 비교, 분석하고 인체공학적으로 안정된 자세의 임상적용 가능성을 알아보고 이를 이용하여 향후 치과의사 교육의 기초 자료로 활용하기 위함이다. 연구 재료 및 방법: 상악 좌측 고정성 국소의치를 위한 인체공학적으로 안정된 자세를 고안하고 임상 경력 3-6년의 보철과 전공의 과정에 있는 치과의사 8명을 선정하여 임의의 자세로 상악 좌측 고정성 부분의치 지대치 삭제를 시행하고 연구 대상자들에게 인체공학적으로 안정된 자세를 교육하고 연구 대상들에게 인체공학적으로 안정된 자세로 상악 좌측 고정성 국소의치 지대치 삭제를 시행하였다. 임의의 자세로 삭제 시행한 치아와 인체공학적으로 안정된 자세로 삭제 시행한 치아를 KHDP 3-dimensional measuring device를 사용하여 계측해 교합면 삭제량, 변연의 폭경, 변연의 깊이 축면 경사도. 그리고 삭제시간을 측정 비교하였다. 모든 계측된 결과를 윈도우즈용 SPSS 통계 프로그램 (ver. 18.0, SPSS, Chicago, IL, USA)을 이용하여 교합면 삭제량, 변연의 폭 및 깊이, 축면 경사도, 치아 삭제 시간을 평균값 및 표준편차 분석하고 T-test를 Random Position 와 Home Position에 따른 차이 검정하였다. 결과: 와(fossa) 부위에서의 교합면 삭제량은 상악 좌측 제2소구치 및 제2대구치 모두에서 지시삭제량에 비해 적었으며, 교두정에서의 삭제량은 지시삭제량 1.7 mm에비해 많았으나, Random position과 Home position간에 유의차는 없었다 (P > .05). 변연 폭의 삭제량은 상악 좌측 제2소구치 및 제2대구치 모두에서 지시삭제량에 비해 많았으며, Random position과 Home position간에 유의차는 없었다 (P > .05). 변연 깊이의 삭제량은 상악 좌측 제2소구치 및 제2대구치 모두에서 Random position이 Home position에 비하여 지시삭제량보다 깊었다 (P < .05). 축면경사각은 상악 좌측 제2소구치 및 제2대구치 모두에서 Home position의 축면 경사각이 Random position의 축면경사각보다 작았으나 유의차는 없었다 (P > .05). 피어슨 상관분석 결과, Random position에서 교합면 삭제량, 변연 깊이, 축면경사각은 서로에게 영향을 주고 있었으나, Home position에서는 측정결과 들이 거의 독립적으로 서로에게 영향을 주지 않았다 (P < .05). Home position 삭제 횟수가 많아질수록 삭제소요 시간은 줄어들었고, 이는 실험에 참여한 8명 모두에서 Random position 삭제시간과 비슷해지거나 더 짧았다. 결론: 고정성 국소의치를 위한 상악 좌측 제2소구치 및 제2대구치 삭제의 경우, 교합면 삭제량, 변연의 폭, 변연의 깊이, 축면 경사각에 있어서 Home position과 Random position 간에는 큰 차이가 없었다. 삭제시간, 인접치 인접면 손상 정도는 Home position이 Random position보다 적었다. 또한 자세분석을 한 결과 Home position이 Random position에 비하여 곧은 자세로 인체에 무리를 주지 않았다. 따라서 인체공학적으로 안정된 자세인 Home position의 임상적용 가능성이 높다고 생각된다.

Deep proximal margin rebuilding with direct esthetic restorations: a systematic review of marginal adaptation and bond strength

  • Hoda S. Ismail;Ashraf I. Ali;Rabab El. Mehesen;Jelena Juloski;Franklin Garcia-Godoy;Salah H. Mahmoud
    • Restorative Dentistry and Endodontics
    • /
    • 제47권2호
    • /
    • pp.15.1-15.18
    • /
    • 2022
  • This review aimed to characterize the effect of direct restorative material types and adhesive protocols on marginal adaptation and the bond strength of the interface between the material and the proximal dentin/cementum. An electronic search of 3 databases (the National Library of Medicine [MEDLINE/PubMed], Scopus, and ScienceDirect) was conducted. Studies were included if they evaluated marginal adaptation or bond strength tests for proximal restorations under the cementoenamel junction. Only 16 studies met the inclusion criteria and were included in this review. These studies presented a high degree of heterogeneity in terms of the materials used and the methodologies and evaluation criteria of each test; therefore, only a descriptive analysis could be conducted. The included studies were individually evaluated for the risk of bias following predetermined criteria. To summarize the results of the included studies, the type of restorative material affected the test results, whereas the use of different adhesive protocols had an insignificant effect on the results. It could be concluded that various categories of resin-based composites could be a suitable choice for clinicians to elevate proximal dentin/cementum margins, rather than the open sandwich technique with resin-modified glass ionomers. Despite challenges in bonding to proximal dentin/cementum margins, different adhesive protocols provided comparable outcomes.

Correlation between different methodologies used to evaluate the marginal adaptation of proximal dentin gingival margins elevated using a glass hybrid

  • Hoda S. Ismail;Brian R. Morrow;Ashraf I. Ali;Rabab El. Mehesen;Franklin Garcia-Godoy;Salah H. Mahmoud
    • Restorative Dentistry and Endodontics
    • /
    • 제47권4호
    • /
    • pp.36.1-36.17
    • /
    • 2022
  • Objectives: This study aimed to evaluate the effect of aging on the marginal quality of glass hybrid (GH) material used to elevate dentin gingival margins, and to analyze the consistency of the results obtained by 3 in vitro methods. Materials and Methods: Ten teeth received compound class II cavities with subgingival margins. The dentin gingival margins were elevated with GH, followed by resin composite. The GH/gingival dentin interfaces were examined through digital microscopy, scanning electron microscopy (SEM) using resin replicas, and according to the World Dental Federation (FDI) criteria. After initial evaluations, all teeth were subjected to 10,000 thermal cycles, followed by repeating the same marginal evaluations and energy dispersive spectroscopy (EDS) analysis for the interfacial zone of 2 specimens. Marginal quality was expressed as the percentage of continuous margin at ×200 for microscopic techniques and as the frequency of each score for FDI ranking. Data were analyzed using the paired sample t-test, Wilcoxon signed-rank test, and Pearson and Spearmen correlation coefficients. Results: None of the testing techniques proved the significance of the aging factor. Moderate and strong significant correlations were found between the testing techniques. The EDS results suggested the presence of an ion-exchange layer along the GH/gingival dentin interface of aged specimens. Conclusions: The marginal quality of the GH/dentin gingival interface defied aging by thermocycling. The replica SEM and FDI ranking results had stronger correlations with each other than either showed with the digital microscopy results.

치은 변연을 고려한 상악 전치부의 심미 수복 증례 (The esthetic prosthodontic treatments in maxillary anterior area, considering the gingival margin)

  • 손다흰;백장현;우이형;김형섭
    • 대한치과보철학회지
    • /
    • 제54권4호
    • /
    • pp.438-444
    • /
    • 2016
  • 상악 전치부의 보철 수복은 치과 영역의 심미 치료에 있어서 매우 중요한 치료이다. 상악 전치부의 보철 수복을 통해 치아의 형태나 배치, 색상 등을 대체함으로써 심미성의 개선이 가능하다. 이러한 치료를 계획할 때, 안모 및 치아와 입술과의 관계 분석, 치아와 치은의 분석 등을 통해 환자마다 개별적인 고려 사항에 대한 접근이 필요하다. 이러한 고려 사항 중 치아 주위 치은 구조를 적절히 형성하는 것은 매우 중요한데, 치은 변연의 높이, 치은 정점의 위치, 치간 유두의 재건, 출현 윤곽, 좌우 측의 대칭성 등을 고려해야 한다. 하지만 치은 구조가 항상 적절히 형성되어 있는 것은 아니기 때문에, 보철 치료 시 비심미적인 치은 구조의 개선을 위한 처치를 계획해야 하는 경우가 많다. 이 증례에서는 치은 외형의 결함으로 인한 비심미성을 개선하기 위해 치료를 시행한 환자들에서 외과적 처치 없이 각각 pink porcelain, 치은 연하 형태의 형성, 가공치 기저부 형태의 조정을 통해 만족할만한 심미적인 결과를 얻었기에 보고하고자 한다.