• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.111-123
• /
• 2022

Carbonate green rust (CGR) and sulfate green rust (SGR) commonly occur in nature. In this study, CGR and SGR were synthesized through co-precipitation, and their formation mechanisms and physicochemical properties were investigated. X-ray diffraction (XRD) and Rietveld refinement showed both CGR and SGR with layered double hydroxide structure were successfully synthesized without any secondary phases under each synthetic condition. Refined structural parameters (unit cell) for two green rusts were a (=b) = 3.17 Å and c = 22.52 Å for CGR and a (=b) = 5.50 Å and c = 10.97 Å for SGR with the crystallite size 57.8 nm in diameter from (003) reflection and 40.1 nm from (001) reflections, respectively. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) results showed that both CGR and SGR had typical hexagonal plate-like crystal morphologies but their chemical composition is different in the content of C and S. In addition, Fourier transform infrared (FT-IR) spectroscopy analysis revealed that carbonate (CO₃^2-) and sulfate (SO₄^2-) molecules were occupied as interlayer anions of CGR and SGR, respectively. These SEM/EDS and FT-IR results were in good agreement with XRD results. Changes in the solution chemistry (i.e., pH, Eh and residual iron concentrations (Fe(II):Fe(III)) of the mixed solution) were observed as a function of the injection time of hydroxyl ion (OH^-) into the iron solution. Three different stages were observed in the formation of both CGR and SGR; precursor, intermediator, and green rust in the formation of both CGR and SGR. This study provides co-precipitation methods for CGR and SGR in a way of the stable synthesis. In addition, our findings for the formation mechanisms of the two green rusts and their physicochemical properties will provide crucial information with researches and industrials in utilizing green rust.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.586-592
• /
• 2009

The preparation of structures with nanosized arrays allows mimicking many different morphologies that exist in nature. In addition, polymer is considered as a material that can be easily applicable to the fabrication of nanostructures and can effectively exhibit nanosize effects since material, synthesis and processing cost is low, and many of polymer structures are well studied. Porous alumina template prepared by anodization of aluminum among nanofabrication methods is the one of promising routes that cost-effectively provides very regularly arrayed nanostructures. In this review, we describe the fabrication of the nanotemplate and template-based polymer nanostructures and their applications.

• Journal of Environmental Impact Assessment
• /
• v.19 no.4
• /
• pp.381-396
• /
• 2010

It is essential to consider strategies, spatial planning, and reflection of sustainability for the creation of sound urban spaces. To this end, there is a need for plans that can secure better sustainability through strategic environmental assessment (SEA) of plans. This study examined the literature and available precedent to develop a SEA model for administrative plans for urban development including metropolitan plans, urban master plans and urban management plans. In the course of development of the model, environmental issues associated with the urban plans were analyzed by classifying them into ten categories, including "spatial planning," "conservation planning," "greenbelt systems," "habitats." and etc. according to their rank. Furthermore, those issues were reflected on the development of environmental evaluation indices for the plans. Overall and detailed environmental indices that can be applied to the administrative plans for urban development including metropolitan plans, urban master plans and urban management plans were devised for five stages: (1) Establishment of development goals and strategy, (2) Analysis of current status and characteristics, (3) Conceptualization of spatial structure, (4) Planning for each department, and (5) Execution and management. Sub plans are more detailed and concrete. Criteria based on the evaluation indices, when performing evaluations on plans based on each environmental assessment index in reference to experts and the literature, were used to forecast their effects, i.e. whether they had a positive, negative, or no effect or relationship, or whether their effects was uncertain. Based on the forecasts, this study then presents means to establish more improvable plans. Furthermore, by synthesis of the effects according to each index and integration of the process, plans were analyzed overall. This study reflects the characteristics of the present time period based on issues in the SEA process and techniques in upper level administrative plans being newly established, and presents them according to the stage of each plan. Furthermore, by forecasting the effect of plans by stage, this study presents proposals for improvement, and in this aspect, can be meaningful in promoting plan improvements through SEA.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.6-16
• /
• 1998

Ceramides are currently emerging as the major skin care ingredients due to !heir barrier properties in the stratum corneum of the human skin. Thus, major cosmetic companies have developed synthetic ceramide analogs for their own use. In this study, several ceramide mimic compounds , new skin barrier lipids, were designed and synthesized, and their physical and biological properties were investigated to evaluate their skin care capability. Several structures were designed from the variation of hydrophobic alkyl chain and hydrophilic moiety by the use of molecular modeling software. The selected targets were synthesized, and their properties and activities were studied as the pure form, in the emulsion, or in the lamellar mixture containing cholesterol and fatty acid. Some compounds, such as 1,3-bis(N-(2-hydroxyethyl)-palmitoylamino)-2-hydroxypropane, enhanced the restoration of skin barrier damaged by SDS(sodium dodecyl sulfate), and by acetone treatment. The rate of restoration was comparable to that of natural ceramides. The synthesized compounds alleviated SDS induced skin irritation and facilitated lamellar phase liquid crystal formation. The treatment of 1,3-Dis(N-(2-hydroxyethyl)-palmitoylam ino)-2-hyd roxypropane on the acetone damaged skin revealed that the compound promoted the recovery of intercellular lipid lamellar structure of stratum corneum layer. The replacement of palmitoyl groups of the compound with shorter alkyl chain gave lower emulsion viscosity and liquid crystal density, suggesting easier formulation and poorer barrier activity. Most of the synthesized compounds were non-irritable in various toxicological tests proving that they can be safely introduced to the skin care formulations.

• Journal of The Korean Association For Science Education
• /
• v.37 no.3
• /
• pp.465-481
• /
• 2017

This study is a research synthesis analyzing how field geology education is conducted in domestic and foreign countries in the recent 20 years and how it reflects the characteristics of authentic geologic inquiry. For these purposes, we first drew five elements of inquiry in field geology (observation, representation, abductive reasoning, spatial thinking, and diachronic thinking) considering the field geologists' actual research method as well as its pedagogical significance in science education. We developed analysis criteria for field geology education. The 53 cases were analyzed based on each element of inquiry in field geology and its sub-elements, and also the tendency of overall elements. As a result, observation and representation were included in most cases, but there appeared less frequency in order of abductive reasoning, spatial thinking, and diachronic thinking. For observation, the ratio of purposive observation and autonomous observation is high. For representation, both visualizing and linguistic type of representation and free-form representation appear frequently. For abductive reasoning, the step of generating hypothesis is often included and the hypothesis tends to be about the geological formatting process. For spatial thinking, type of self-location and perception of the spatial configuration of the structure appear at a high rate. For diachronic thinking, type of stratigraphic sequence is the most frequent. The proportions of the cases including three or more elements of inquiry in field geology consist 87% of the total. We suggested implications for improving geological fieldwork as authentic science inquiry in the future.

• Clean Technology
• /
• v.26 no.1
• /
• pp.7-12
• /
• 2020

Ti-SBA-15 catalysts doped with lanthanide ions (Ln/Ti-SBA-15) were successfully synthesized using conventional hydrothermal method. In addition, they were characterized by XRD, FT-IR, DRS, BET, and PL. The activity of these materials on the photocatalytic decomposition of methylene blue under ultraviolet light irradiation was also examined. Ti-SBA-15 catalysts doped with various lanthanide ions maintained their mesoporous structure. The pore size and pore volume of Ln/Ti-SBA-15 materials decreased but their surface area increased upon the doping of lanthanide ion. Ln/Ti-SBA-15 materials exhibited the type IV nitrogen isotherm with desorption hysteresis loop type H2, which was characteristic of mesoporous materials. The size of hysteresis increased in the doping of lanthanide ions on Ti-SBA-15 material. There was no absorption in the visible region (> 400 nm) regardless of the doping of lanthanide ions to TiO₂ particles, while the broad bands at 220 nm appeared at the Ln/Ti-SBA-15 samples, indicating the framework incorporation of titanium into SBA-15. 1 mol% Pr/ Ti-SBA-15 catalysts showed the highest photocatalytic activity on the decomposition of methylene blue but the Ti-SBA-15 catalysts doped with Eu, Er, and Nd ions showed lower activity compared to pure Ti-SBA-15 catalyst. The PL peaks appeared at about 410 nm at all catalysts while the excitonic PL signal was proportional to the photocatalytic activity for the decomposition of methylene blue.

• Journal of the Korean Ceramic Society
• /
• v.39 no.6
• /
• pp.550-557
• /
• 2002

TiO$_2$ particles coated on fly ash composites for use in photocatalyst were synthesized by the precipitation dropping method and heated at $700^{\circ}C$ for 2 h. The pH of reaction solution, the addition rate of NH$_4$HCO$_3$, the stirring speed, the reaction temperature and the concentration of TiC1$_4$ had a pronounced effect on the nature of precipitated TiO$_2$ particles on the surface off fly ash and the crystal structure of precipitated TiO$_2$ particles. At an addition rate of NH$_4$HCO$_3$; 1.0 ml/min, the pH of the reaction solution; 6, the stirring speed; 1,000 rpm and the reaction temperature; 8$0^{\circ}C$, about 10 nm of TiO$_2$ particle size and homogeneous precipitated layer on the surface of a fly ash was achieved. On the contrary, at an addition rate of NH$_4$HCO$_3$; 0.3,0.5 ml/min, the pH of the reaction solution; 2 and 11, the stirring speed; 300~500 rpm and the reaction temperature; lower than 5$0^{\circ}C$:, Inhomogeneous precipitated layer was developed on a fly ash. TiO$_2$ particles with anatase phase was formed as-dried precipitation at the low concentration of Tic14, the high addition rate of NH$_4$HCO$_3$ and the high reaction temperature, the crystalline fraction of anatase increased with raising heat-treatment temperature and rutile phase began to formation at 80$0^{\circ}C$. The crystal size of TiO$_2$ particles increased with raising the heat-treatment temperature, the crystal size was showed about 21 m at $700^{\circ}C$. Anatase type of TiO$_2$ coated on the fly ash heated at $700^{\circ}C$ for 2 h showed 1.25 g/cm$^3$of particle density, 82.8% of strength and 69.5 Lab of whiteness and can be used as a photocatalyst.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.487-492
• /
• 2015

The effects of chemical structure of alkyl groups of norbornene carboxylic alkyl esters(methyl, octyl, 4-chlorobenzyl) and endo/exo ratios of norbornene monomers on activity of palladium catalyst and polymerization behavior were investigated. Norbornene ester monomers were synthesized from the reaction of 5-norborene-2-carboxylic acid and various alcohols. Polymerization catalyst, di-${\mu}$-chloro-bis(-methoxybicyclo[2,2,1]-hept-2-ene)palladium(II) (DCBMP), was synthesized according to the literature procedure and silver hexafluoroantimonate ($AgSbF_6$) was used as a conjugate anion source. Gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) were the principal techniques for polymer characterization and $^1H$ NMR spectroscopy was used for chemical structures determination of monomers and polymers. For all of the norbonene alkyl esters GPC data showed that when the amounts of endo isomers exceeded those of exo isomers decreased molecular weight polymers were obtained probably due to the decreased catalyst activity. Polymerizations were conducted by varying the monomer/catalyst mole ratios (100:1, 200:1, 300:1). When 300:1 monomer/catalyst ratio was employed it was possible to synthesize high molecular weight ($M_n=27500g/mol$), film forming polymer from exo-norbornene carboxylic acid octyl ester.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.57-68
• /
• 2023

In this study, coffee waste was recycled into nitrogen-doped porous carbon fibers as an active material for high-energy EDLC (Electric Double Layer Capacitors). The coffee waste was mixed with polyvinylpyrrolidone and dissolved into dimethylformamide. The mixture was then electrospun to fabricate coffee waste-derived nanofibers (Bare-CWNF), and carbonization process was followed under a nitrogen atmosphere at 900℃. Similar to Bare-CWNF, the as-synthesized carbonized coffee waste-derived nanofibers (Carbonized-CWNF) maintained its fibrous form while preserving the composition of nitrogen. The electrochemical performance was analyzed for carbonized coffee waste (Carbonized-CW)-, carbonized PAN-derived nanofibers (Carbonized-PNF)-, and Carbonized-CWNF-based electrodes in the operating voltage window of -1.0-0.0V, Among the electrodes, Carbonized-CWNF-based electrodes exhibited the highest specific capacitance of 123.8F g^-1 at 1A g^-1 owing to presence of nitrogen and porous structure. As a result, nitrogen-contained porous carbon fibers synthesized from coffee waste showed excellent electrochemical performance as electrodes for high-energy EDLC. The experimental designed in this study successfully demonstrated the recycling of the coffee waste, one of the plant-based biomass that causes the environmental pollution into high-energy materials, also, attaining the ecofriendliness.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.457-465
• /
• 2023

This study was carried out in order to determine the essential structure and meaning of sexual harassment experienced by nurses, prepare a systematic mediation measure that could prevent sexual harassment. In this study, Giorgi's phenomenological research method and an in-depth interview were used, and data was collected from seven participants in general hospital nurses who had experienced sexual harassment from August 6, 2022 to March 25, 2023. The main question used in the in-depth interview was "What does sexual harassment mean to you?". The transcribed data was analyzed according to the method presented by Giorgi through the stages including reading of the data, breaking of the data into some kind of parts, organization and expression of the data from a disciplinary perspective and synthesis or summary of the data for purposes of communication to the scholarly community. As a result, 159 meaning units, 37 essential psychological meanings, 13 sub-constituents, 5 constituents were drawn. The five components include 'exposed to the front line of sexual harassment', 'struggling alone', 'feeling abandoned from the organization', 'finding a way to get through together' and 'feeling changing'. Based on the above results, it is expected to prevent sexual harassment of nurses and provide basic data useful for preparing systematic intervention measures for them and improving the system.