• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.12 no.1
• /
• pp.27-33
• /
• 1982

The purpose of this study is to obtain some informations for the differential diagnosis of ameloblastoma from dentigerous cyst by analysis of the radiographic findings of these lesions. The author studied age and sex distribution, the site of the lesion, tooth behavior and several radiographic features of ameloblastoma and dentigerous cyst. The material consisted of 65 patients of ameloblastoma and 37 patients of dentigerous cyst. The results were obtained as followings. 1) The incidence was highest in 2nd decade (29.2%) and total 65 cases consists of 35 males (53.8%) and 30 females (46.2%) in ameloblastoma. 62 cases were found in lower jaw (95.4%) and the highest site of occurence of ameloblastoma was mandibular molar. region 27 cases. (41.5%) 2) In 65 cases of amelobl!!stoma, 18 cases were seen in association with tooth and 15 cases (83.2%) out of those were associated with mandibular molar teeth. Mandibular molar were most frequently involved in dentigerous cyst (11/31 cases, 29.7%). 3) (a) 23 cases (35.3%) of tooth resorption were found in ameloblastoma and 11 cases (29.7%) of tooth resorption were found in dentigerous cyst. (b) 15 cases (23.1%) of tooth migration were found in ameloblastoma and 10 cases (27.0%) of tooth migration were found in dentigerous cyst. 4) Several radiographic features. (a) Monolocular type ameloblastoma were seen in 23 cases (35.4) and multilocular type of ameloblastoma were seen in 42 cases (64.6%). Monolocular type of dentigerous cyst were seen in 33 cases (89.2%) and multilocular type was seen in 4 cases. (b) Monolocular type ameloblastoma showed 20 cases (87.0%) of scalloped border but 32 cases (97.0%) of dentigerous cyst showed smooth border. (c) 34 cases (81.0%) of ameloblastoma showed honey-comb appearance, soap-bubble appearance or mixed appearance. but all 4 cases of dentigerous cyst showed multicystic appearance. (d) 12 cases (52.2%) of monolocular type ameloblastoma showed slightly increased radiopacity in surrounding bone, and 22 cases (66.7%) of monolocular type dentigerous cyst showed sharp osteosclerotic border. 27 cases (64.3%) of multilocular type ameloblastoma and 3 cases (75.0%) of multilocular type dentigerous cyst showed no changes in surrounding bone.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.3 s.49
• /
• pp.47-55
• /
• 2006

Seismic performance and retrofit of reinforced concrete (RC) two-column piers widely used at roadway bridges in Korea was experimentally evaluated. Ten two-column piers that were 400 mm in diameter and 2,000 mm in height were constructed. These piers were subjected to hi-directional cyclic loadings under a constant axial load of $0.1f_{ck}A_g$. Test parameters were the confinement steel ratio, loading pattern, lap splice of longitudinal reinforcing bars, and retrofitting method. Specimens with lap-spliced longitudinal bars were retrofitted with steel jacket, pre-stressing steel wire, and steel band. Test result showed that while the specimens subjected to bi-directional lateral cyclic loadings which consisted of two main amplitudes in the transverse axis and two sub amplitudes in longitudinal axis, referred to as a T-series cyclic loadings, exhibited plastic hinges both at the top and bottom parts of the column, the specimens subjected to bi-directional lateral cyclic loadings in an opposite way, referred to as a L-series cyclic loadings, exhibited a plastic hinge only at the bottom of the column. The displacement ductility of the specimen under the T-series loadings was bigger than that of the specimen under the L-series loadings. Specimen retrofitted with pre-stressing steel wires exhibited poor ductility due to the upward shift of the plastic hinge region because of over-reinforcement, but specimens retrofitted with steel jacket and steel band showed the required displacement ductility. Steel band can be an effective retrofitting scheme to improve the seimsic performance of RC bridge piers, considering its practical construction.

• Journal of architectural history
• /
• v.3 no.1
• /
• pp.57-82
• /
• 1994

This paper is the result of the researches and the field surveys of the villages and the dwellings of Korean immigrants in Yien-Pien area, north-eastern China. This study aims to persue both of the origin and the process of development of their settlements and dwelling types from late 19C to the present. Their processes are too complex to analysis by single view-point. I have eyes to interprete them from three pionts; 1)correspondences between the dwelling types and the econo-political history of their region, 2)cultural assimilation with the native dwelling types, and 3)the direction of their modernization with the economical development of modern China. Three village types have been pioneered; 1)the villages of indivisual immigration, 2)the villages of planned group immigration, and 3)the villages of socilistic reform villages of 1) were composed of organic village patterns and various shaped dwelling lots on the sloped site; villages both of 2) and 3), gird patterns and uniformed lots on open fields. Historically, villages of 1) were pioneered before 1931; villages of 2), 1936-1945; villages of 3), from 1945. Each of dwelling types had strong relations with the village types to which it belonged. Before 1931, dwellings were built up based on so called "Ham-buk dwelling type" which was dominent in north-eastern Korea. In the era of gruop-immigration, various dwelling types were flew into Yen-Pien from southern Korea. In modern China, their southern types were changed into Yen-Pien type as similar as Ham-book type. After 1945, with the Great leap Forward and the Cultural Revolution, as communization of indivisual properties and reorganization of rural communities, each of dwellings became smaller and simpler in aspects of scales as well as functions. There are two types in Yen-Pien dwellings, those are 'single-file' and 'double-file' type. Three sub-types of latter arc 'six-bays', 'eight-bays', and rarely 'ten-bays'. The most common element of all types is Chong-ju-k'an; which is large room with heated floor, openig to kitchen. Now, modern dwellings of Korean immigrants are changing their spatial compositions, materials, and structures. With cultural assimilation as well as modernization, especially in urban areas, they are compelled to accept the elements of Chinese dwellings. But the spatial element of "Chong-ju-k'an", which is the core element of Yen-Pien dwelling type, never fade away nor is changed.

• Journal of Periodontal and Implant Science
• /
• v.35 no.3
• /
• pp.563-575
• /
• 2005

The aim of present study is to evaluate the influence of adjacent tooth to the microbiology of clinically healthy implant. Control group included patients who had clinically healthy implant and tooth with healthy $periodontium(PD{\leq}3mm)$, test group was composed of patients who had clinically healthy implant and tooth with periodontal pocket(PD>3mm). The criteria of clinically health implant are no pain or discomfort, the restorative suprastructure provide satisfactory fit and function, and the tissue around the fixtures were firm and probing with standard periodontal probe with a rounded tip 0.5mm in diameter resulted in penetration of no more than 5mm when using a force of 0.5N at any location. 38 patients, partially edentulous subjects with endosseous root-form implants were selected. All subjects were medically healthy and had not taken systemic antibiotics and professional plaque control 3 months before sampling. Number of control group is 25(mean age $52{\pm}13$, 26 teeth, 34 implants) and test group is 13(mean age $60{\pm}13$, 13 teeth, 17 implants). All teeth and implants of each patient were examined probing depth(PD), bleeding on probing(BOP), and plaque index(PI), and samples of subgingival plaque were obtained at each site with sterile curet or fine paper points, then the plaque transferred to PBS. Obtained samples were examined for the presence of P. gingivalis, T. forsythensis, and T. denticola by the polymerase chain reaction(PCR). The relationship among clinical parameters and the colonizations by the 3 bacterial species from natural teeth and implants region were analyzed by student t-test. The results of this study were as follows: 1. PD was different in teeth between 2 groups(p<0.05), but the other parameters were not. 2. Statistically significant difference was not found in clinical parameters of implants between 2 groups. 3. All bacterial prevalences of teeth were higher in test group than in control group, and prevalence of T. forsythensis had statistically significant difference between 2 groups(p<0.05). 4. Prevalences of P. gingivalis and T. forsythensis are higher in test group than control group, and that of T. denticola is higher in control group than in test group. But there were no statistically significant differences between 2 groups. In conclusion, there is no statistically significant difference in prevalence of implant microbiology between 2 groups. But if the number of samples increased, it will be possible to find out statistical significance in prevalence of P. gingivalis. It seems that pocket of adjacent tooth influences prevalence of P. gingivalis. These results mean that improvement of the periodontal condition before implantation is very important.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.1
• /
• pp.5-12
• /
• 2016

Investigation of in-situ ground in cold region is difficult due to low accessibility and environmental factors. In this study, correlation between dynamic cone resistance and shear strength is suggested to estimate the strength of frozen soils by using instrumented dynamic cone penetrometer. Tests were conducted in freezing chamber after preparing sand-silt mixture with 2.3% water content. Vertical stresses of 5 kPa and 10 kPa were applied during freezing, shearing, and penetration phase to compare the dynamic cone resistance and shear strength. The dynamic cone resistance, additionally, is calculated to minimize the effect of energy loss during hammer impact. Experimental results show that as the shear strength increases, the dynamic cone penetration index (DCPI) decreases nonlinearly, while the dynamic cone resistance increases linearly. This study provides the useful correlation to evaluate strength properties of the frozen soils from the dynamic cone penetration and direct shear tests.

• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.108-116
• /
• 2015

This study intends to research the spatial characteristics of Asian interim housing that accommodates sufferers pro tempore after disasters. The scope of this research covers the interim spaces used for housing people after natural disasters that occurred in Asia for the past fifteen years. Within this scope, literature review was conducted as the basis to derive the characteristics and environmental elements of interim housing, which provided the criteria to compare and evaluate cases of interim housing along with characteristic elements required of interim housing found in previous studies. According to literature review, interim housing can be classified by life-span, region, economy, climate, type, number of household, square measure, residential cost, structure/material, and service life. Within the scope of the present research, literature review showed a total of twenty-eight cases of interim housing in fifteen countries revealing a high rate of disaster occurrence in the subtropic and tropic climate of Southeast Asia. A great percentage of interim housing was used for long-term stay of over a year. The structure of interim housing varied from lightweight steel, wooden, masonry, membrane, to traditional structure and the type were divided into temporary shelter, transitional housing, temporary housing, and permanent housing. Followed by literature review, the characteristics required of post-disaster interim housing were analyzed based on previous research and case studies. The characteristics of interim housing can be divided into environmental, technological, and socio-cultural ones. Sub-characterical items according to such division include amenity, health, surroundings, structure, convenience, eco-friendliness, safety, communication, and locality. As a result of evaluation, most items met the required characteristics of interim housing, while technological characteristics such as structure and convenience varied with the types of interim housing and appeared even unnecessary in some cases. According to analysis, amenity is maintained through the structural and material characteristics of interim housing and is also facilitated by increasing number of infrastructure such as educational, sanitary, and convenience facilities provided by the governmental and organizational bodies. It is expected that this study will be utilized as preliminary data for follow-up studies that improve the environment of post-disaster interim housing suitable for domestic circumstances in environmental, technological, and socio-cultural respects.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.214-215
• /
• 2013

Current competition among companies than regional, the time constraints, it is globalization, Tilt the efforts of many to be operated by building the efficient distribution system to reduce logistics costs and improve customer service it is reality's there. Therefore, the need for industrial complexes environmentally friendly can be cost competitive companies perform cavitation region's increased. To build the distribution center these logistics system through a joint of freight and appropriate policy is required. In particular, efficient operation through the system construction of industrial complexes in the logistics system is very important in terms of friendly low-cost urban logistics, the environment. Since the traffic volume which is Jipufa and utilization of network is transported by a more appropriate technicians and means suitable operating model can efficiency is improved. However, despite these advantages, research network design has not been actively conducted due to the complexity of the problem. Therefore, in this study, by analyzing the logistics system, and presents the operating model through a simulation and basic settings for the model of the logistics complex based on the analysis result, the construction of infrastructure of logistics industry complex it is intended to present the article.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.451-466
• /
• 2017

Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sunk to the bottom of the sea due to the very rough sea weather on the way of evasion after a fishing operation in the Bearing Sea. As a result, many crew members died and/or were missing. In this study, a full-scale ship flooding sinking simulation was conducted, and the sinking process was analyzed for the precise and scientific investigation of the sinking accident using highly advanced Modeling & Simulation (M&S) system of Fluid-Structure Interaction (FSI) analysis technique. To objectively secure the weather and sea states during the sinking accident in the Bering Sea, time-based wind and wave simulation at the region of the sinking accident was carried out and analyzed, and the weather and sea states were realized by simulating the irregular strong wave and wind spectrums. Simulation scenarios were developed and full-scale ship and fluid (air & seawater) modeling was performed for the flooding sinking simulation, by investigating the hull form, structural arrangement & weight distribution, and exterior inflow openings and interior flooding paths through its drawings, and by estimating the main tank capacities and their loading status. It was confirmed that the flooding and sinking accident was slightly different from a general capsize and sinking accident according to the simple loss of stability.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.10 no.2
• /
• pp.88-103
• /
• 2006

Objectives : We performed this study to search the best time for HRV measuring and which index has the validity in a short term measuring. Methods : At first, three examiner measured electrocardiogram(ECG) of 5 people(4 male + 1 female) for 20 minutes in two times. and we devided ten regions (0-5, 5-10, 10-15, 15-20, 0-10, 0-15, 0-20, 5-15, 10-20, 5-20 minutes). After that we finded the HRV index for each regions. To evaluate the validity, we used Gage Repeatability and Reproducibility Study by MINITAB(ver. 13.20). If the '%Study Var' is under 30 and 'Number of Distinct Categories' is over 4, we could tell it has validity(repeatability and reproducibility). Results : 1) The region and HRV index has repeatability and reproducibility, was HF index in 10-15 minutes. The HF index in 15-20 minutes gained 27.41(%Study Var) and 5(Number of Distinct Categories). 2) The HF index in 10-15 minutes has the better reproducibility than repeatability. The value of measurement is under the control. There is consistency among the examiner. The distribution of measurement is not large. There is no interaction between examiner and each people. 3) The HF index in 10-15, 0-10, 0-15, 0-20, 10-20 minutes was not enough to gain the repeatability and reproducibility. But it had some meanings ; %Study Var, Number of Distinct Categories is 32.68, 4 for 10-15 minutes, 34.43, 4 for 0-10 minutes, 34.44, 4 for 0-15 minutes, 33.56, 4 for 0-20 minutes, 32.07, 4 for 10-20 minutes. Conclusions : This study shows the best index of measuring HRV is the HF index in 15-20 minutes. So, from now on we should measure the HRV for 20 minutes and extract the HF index in 15-20 minutes. It must be the standard for HRV measuring.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.8
• /
• pp.195-202
• /
• 2018

With the development of location-based applications such as smart phones and GPS navigation, active research is being conducted to protect location and trajectory privacy. To receive location-related services, users must disclose their exact location to the server. However, disclosure of users' location exposes not only their locations but also their trajectory to the server, which can lead to concerns of privacy violation. Furthermore, users request from the server not only location information but also multimedia information (photographs, reviews, etc. of the location), and this increases the processing cost of the server and the information to be received by the user. To solve these problems, this study proposes the EGTC (Enhanced Grid-based Trajectory Cloaking) technique. As with the existing GTC (Grid-based Trajectory Cloaking) technique, EGTC method divides the user trajectory into grids at the user privacy level (UPL) and creates a cloaking region in which a random query sequence is determined. In the next step, the necessary information is received as index by considering the sub-grid cell corresponding to the path through which the user wishes to move as c(x,y). The proposed method ensures the trajectory privacy as with the existing GTC method while reducing the amount of information the user must listen to. The excellence of the proposed method has been proven through experimental results.