• 한국분무공학회지
• /
• 제26권4호
• /
• pp.163-170
• /
• 2021

Emergency generators normally use diesel engines. The generators need to conduct weekly no-load operation inspections to ensure stable performance at emergency situations. In particular, the generators with large diesel engines mainly use rectangle type filter substrates. In order to minimize hazardous emissions generated by generators, optimizing the reduction efficiency through CFD analysis of flow characteristics of PM/NO_X reduction system is important. In this study, we analyzed internal flow by CFD, which is difficult to confirm by experimental method. The main factors in our numerical study are the changes of flow uniformity and back pressure. Therefore, changes in flow characteristics were studied according to urea injector locations, selective catalyst reduction (SCR) diffuser angle, and filter porosity.

• 한국정보통신학회논문지
• /
• 제26권6호
• /
• pp.914-921
• /
• 2022

국제해사기구는 친환경규제로 2008년 대비 2050년까지 선박의 이산화탄소 배출량을 70%, 온실가스 배출량을 50% 줄이겠다는 목표를 세웠다. 선주 및 조선소에서는 이를 만족하기 위한 방법으로 LNG추진, 암모니아추진, 전기추진, CO₂포집, 샤프트 제너레이터 등 다양한 연구개발을 추진하고 있다. 이중 샤프트 제너레이터는 개조공사를 통해 기존선에 바로 적용가능한 장점이 있다. 본 논문에서는 기존선에 샤프트 제너레이터를 적용함으로 얻을 수 있는 총 연료 감소율을 시뮬레이션을 통해 검증하였다. 이를 위해, 중형선의 크기를 정의하고, 조속기, 디젤엔진, 프로펠러, 토크 스위치, 샤프트 제너레이터용 발전기와 추진전동기, 선박모델 등에 대해 모델링하고 시뮬레이션하였다.

• 정보처리학회논문지C
• /
• 제16C권3호
• /
• pp.357-362
• /
• 2009

합산수열 발생기는 간단한 하드웨어 또는 소프트웨어로 구현될 수 있고, 주기와 선형복잡도가 높은 특징이 있어 유비쿼터스 시대의 이동환경 보안장치에 적합하다. 하지만 Golic의 상관성공격과 Meier의 고속 상관성공격에 의해 취약성이 노출되었다. 본 논문에서는 합산 수열 발생기 형태의 $E_0$ 알고리즘에서 LFSR과 비선형 귀환 이동 레지스터 NFSR(nonlinear feedback shift register) 를 조합한 형태로 개선하여 비선형성을 높이고, 상관성 공격 등의 암호해독이 어려운 새로운 알고리즘 NSG를 제안하고, 제안 알고리즘에 대하여 안전성 및 성능을 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.148-153
• /
• 2004

This paper represents that parts of a large generator operating in 1000 MW are affected by centrifugal forces due to high-speed rotation in 3600 rpm and 3D FEM Analyses are required to obtained the structural reliability of the generator. From these results, one would know the weakest locations and the stress distributions. The fatigue life is calculated in order to grasp the remaining life of generator. 2D and 3D analyses are performed to calculate stresses of the generator rotor and the retaining ring. From 2D results, we find the SCF at the slot and sub-slot of the rotor. 3D analysis is applied at the end part of generator rotor, which represents complex geometry, and rotor and retaining ring shrink thermally. With these results, designers of rotor and retaining ring can compare with the results of design code and verify the stress distributions of generator rotor and retaining ring, and then calculate the remaining life from the low-cycle fatigue data.

• 동력기계공학회지
• /
• 제18권4호
• /
• pp.52-59
• /
• 2014

The purpose of this study is to evaluate the performance of after-treatment equipment and thermal storage devices for a heat recovery and combustor-type $CO_2$ generator fuelled a kerosene. To reduce the levels of harmful exhaust gases produced by a $CO_2$ generator, a catalyzed particulate filter(CPF) has been selected as an after-treatment device, by considering back pressure and exhaust gas temperature. The CO conversions of the catalyzed SiC filter(full plugging) were 92%, and the concentration of PM(particulate matter) was near ambient. A thermal recovery device was used to recover 13% of the heat energy from the exhaust gas through heat exchangers installed on the exhaust line of the $CO_2$ generator. 69% of the moisture within the exhaust gases was removed by condensing water, in order to minimize excessive humidity within the greenhouse.

• 대한수학회보
• /
• 제44권1호
• /
• pp.47-59
• /
• 2007

We find the uniformizers of modular curves $X_{1}(N)\;(N=2,3)$ and explore the relationship with Thompson series and number theoretic property.

• 한국항공우주학회지
• /
• 제36권5호
• /
• pp.491-496
• /
• 2008

본 연구에서는 RBCC (Rocket Based Combined Cycle)엔진이나 기존 램제트 추진기관의 초기 추력 제공에 과산화수소 가스발생기를 이용하는 새로운 추진시스템을 제안하였고, 기초 연구 수행으로서 촉매 분해된 과산화수소 제트에 케로신을 분사하여 자연발화 및 연소 특성을 연구하였다. 과산화수소는 촉매 베드를 통하여 분해된 후 축소노즐을 통해 연소실로 분사됐으며 이 제트에 인젝터를 통하여 수직으로 케로신을 액상으로 분무하였다. 연소실내에서의 온도와 압력을 측정하여 점화를 확인하고 자연발화 특성을 조사하였다. 400°C의 연소실 온도와 연료와 산화제 혼합비 0.6이상에서 자연발화와 안정적인 연소가 가능하였다. 이 결과를 통하여 램제트의 새로운 초기 가속장치의 가능성을 확인할 수 있었다.

• 한국재료학회지
• /
• 제26권3호
• /
• pp.123-129
• /
• 2016

The morphology, crystal structure and size of aerosol nanoparticles generated by erosion of electrodes made of different materials (titanium, copper and aluminum) in a multi-spark discharge generator were investigated. The aerosol nanoparticle synthesis was carried out in air atmosphere at a capacitor stored energy of 6 J, a repetition rate of discharge of 0.5 Hz and a gas flow velocity of 5.4 m/s. The aerosol nanoparticles were generated in the form of oxides and had various morphologies: agglomerates of primary particles of $TiO_2$ and $Al_2O_3$ or aggregates of primary particles of $Cu_2O$. The average size of the primary nanoparticles ranged between 6.3 and 7.4 nm for the three substances studied. The average size of the agglomerates and aggregates varied in a wide interval from 24.6 nm for $Cu_2O$ to 46.1 nm for $Al_2O_3$.

• Journal of applied mathematics & informatics
• /
• 제36권5_6호
• /
• pp.359-368
• /
• 2018

In this paper, we investigate quasi-cyclic codes over the ring $R={\mathbb{F}}_2+v{\mathbb{F}}_2$, where $v^2=v$. We investigate the structure of generators for one-generator quasi-cyclic codes over R and their minimal spanning sets. Moreover, we find the rank and a lower bound on minimum distances of free quasi-cyclic codes over R. Further, we find a relationship between cyclic codes over a different ring and quasi-cyclic codes of index 2 over R.

• 대한전기학회논문지
• /
• 제39권2호
• /
• pp.142-148
• /
• 1990

This paper deals with the desing method of Superconducting AC Generator (SCG). The establishment of design principle and design procedure of SCG are included in this study. Electric characteristics of SCG, such as synchronous reactance and sub-sub-transient reactance, are specified first as constraints and the size of SCG is calculated. Synchronous reactance and sub-sub-transient reactance are important factors because they determine the steady state and transient characteristics of SCG, respectively. A 20KVA SCG with double-shielded single-rotor is chosen for the case study. The design procedure proposed in this papar will also be applicable to large scale generators.