• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.24-31
• /
• 2021

We report structural, mechanical, and thermal properties of diecast ADC12 aluminum alloys characterized using synchrotron X-ray diffraction (XRD), scanning electron microscopy, energy dispersive X-ray (EDX) analysis, thermal conductivity (λ), Vickers hardness (Hv), and stress-strain measurements. We also studied the effect of post-annealing performed in a vacuum atmosphere on the mechanical properties of diecast ADC12 alloys. EDX and XRD results revealed that Al2Cu and AlCu3 grains are formed, well dispersed in Al base and highly crystalline. Ultimate tensile strength (UTS) of 307.9 ± 9.1 MPa and elongation of 2.98 ± 0.62 % were estimated. λ was 129.3 ± 0.27 W/m·K and Hv was approximately 130. Both values were significantly higher than the reported values. At annealing temperatures ranging from 25 to 200℃, UTS and Hv values remained constant, while as the annealing temperature increased to 500℃, these values gradually decreased. This is because stabilization of the microstructure improves toughness and ductility.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1A
• /
• pp.61-73
• /
• 2009

In this paper, hybrid health monitoring techniques using acceleration-impedance features are newly proposed to detect two damage-type in steel plate-girder bridges, which are girder's stiffness-loss and support perturbation. The hybrid techniques mainly consists of three sequential phases: 1) to alarm the occurrence of damage in global manner, 2) to classify the alarmed damage into subsystems of the structure, and 3) to estimate the classified damage in detail using methods suitable for the subsystems. In the first phase, the global occurrence of damage is alarmed by monitoring changes in acceleration features. In the second phase, the alarmed damage is classified into subsystems by recognizing patterns of impedance features. In the final phase, the location and the extent of damage are estimated by using modal strain energy-based damage index method and root mean square deviation (RMSD) method. The feasibility of the proposed hybrid technique is evaluated on a laboratory-scaled steel plate-girder bridge model for which hybrid acceleration-impedance signatures were measured for several damage scenarios. Also, the effect of temperature on the accuracy of the impedance-based damage monitoring results are experimentally examined from combined scenarios of support damage cases and temperature changes.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.208-215
• /
• 1999

The creep behavior of a rapidly solidified and consolidated Al-9.45wt%Fe-4.45wt%Cr alloy were investigated in the stress range 40 to 115 MPa and temperature range 300(0.53Tm) to 441$^{\circ}C$(0.66Tm). It is of use to available aerospace and automobile industries for the improved performance of materials used at high temperature. Because Al alloys with improved creep resistance offer the potential for lower weight and reduced costs in aerospace and automobile components (e.g., structural members and engine parts) through the replacement of heavier and more costly materials, the safety in use at high temperature is good. The alloy is characterized by high stress exponents and activation energies for creep, which are greatly dependent on the stress and temperature. Because the creep stress is seen to cause a strongly significant enhancement of coarsening, the coarsening rate of the dispersed particles in all crept specimens is faster than that in isothermally annealed specimens. Dislocations connecting dispersoids are observed more cofrequently in crept specimens with higher stress and lower temperature. The creep strain rates in the power law creep regime were found to be predicted much better by the Shorty and Rosler/Arzt equation with the inclusion of a threshold stress and dislocation detachment mechanism. The dispersoids in this alloy were acting a source of void nucleation that finally leaded to ductile fracture within the grain so called intergranular. Each void was initiated, grown and failed at the dispersoids in the aluminium matrix. Grain boundary accommodation of the slip produced, which result in initiation of the void and then final transgranular fracture. Therefore, it was confirmed that these dispersoids played an important role in the fracture mechanism by the formation of $Al_{13}Fe_4$, $Al_{13}Cr_2$ and $Al_2O_3$.

• Information Systems Review
• /
• v.19 no.4
• /
• pp.63-85
• /
• 2017

Recent information technology achieves remarkable progress in almost all areas where it can be applied. However, this technology also causes technostress, such as fear and pressure to individuals, due to events, such as the threat of job loss. This technostress is becoming an important factor that can affect user performance and productivity in future society where information technology will be the focus. This kind of stress should be studied considerably in academic and practical applications. The effects of technostress on individual performance remain ambiguous. Therefore, academic research is needed to prove these effects. This study aimed to clarify the direct and indirect effects of technostress on information technology end-users. We developed a research model that integrates innovation resistance and technostress theory through previous studies and analyzed the questionnaire of 317 people. The PLS structural equation model and the study results of Baron and Kenny (1986) indicated that rapid change, connectivity, reliability, and complexity are crucial factors affecting the technostress of information technology. Technostress was analyzed indirectly only through innovation resistance, which affected the performance of end-users. This study will provide new implications for the relationship between technostress and performance or productivity in the IS field.

• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.485-496
• /
• 2013

In recent years, frequent terror or military attacks by explosion or impact accidents have occurred. Examplary case of these attacks were World Trade Center collapse and US Department of Defense Pentagon attack on Sept. 11 of 2001. These attacks of the civil infrastructure have induced numerous casualties and property damage, which raised public concerns and anxiety of potential terrorist attacks. However, a existing design procedure for civil infrastructures do not consider a protective design for extreme loading scenario. Also, the extreme loading researches of prestressed concrete (PSC) member, which widely used for nuclear containment vessel, gas tank, bridges, and tunnel, are insufficient due to experimental limitations of loading characteristics. To protect concrete structures against extreme loading such as explosion and impact with high strain rate, understanding of the effect, characteristic, and propagation mechanism of extreme loadings on structures is needed. Therefore, in this paper, to evaluate the impact resistance capacity and its protective performance of bi-directional unbonded prestressed concrete member, impact tests were carried out on $1400mm{\times}1000mm{\times}300mm$ for reinforced concrete (RC), prestressed concrete without rebar (PS), prestressed concrete with rebar (PSR, general PSC) specimens. According to test site conditions, impact tests were performed with 14 kN impactor with drop height of 10 m, 5 m, 4 m for preliminary tests and 3.5 m for main tests. Also, in this study, the procedure, layout, and measurement system of impact tests were established. The impact resistance capacity was measured using crack patterns, damage rates, measuring value such as displacement, acceleration, and residual structural strength. The results can be used as basic research references for related research areas, which include protective design and impact numerical simulation under impact loading.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.67-76
• /
• 2024

In this paper, we present a DIP-MLS testing method that combines digital image processing with a rigid body-based MLS differencing approach to measure mechanical variables and analyze the impact of target location and image resolution. This method assesses the displacement of the target attached to the sample through digital image processing and allocates this displacement to the node displacement of the MLS differencing method, which solely employs nodes to calculate mechanical variables such as stress and strain of the studied object. We propose an effective method to measure the displacement of the target's center of gravity using digital image processing. The calculation of mechanical variables through the MLS differencing method, incorporating image-based target displacement, facilitates easy computation of mechanical variables at arbitrary positions without constraints from meshes or grids. This is achieved by acquiring the accurate displacement history of the test specimen and utilizing the displacement of tracking points with low rigidity. The developed testing method was validated by comparing the measurement results of the sensor with those of the DIP-MLS testing method in a three-point bending test of a rubber beam. Additionally, numerical analysis results simulated only by the MLS differencing method were compared, confirming that the developed method accurately reproduces the actual test and shows good agreement with numerical analysis results before significant deformation. Furthermore, we analyzed the effects of boundary points by applying 46 tracking points, including corner points, to the DIP-MLS testing method. This was compared with using only the internal points of the target, determining the optimal image resolution for this testing method. Through this, we demonstrated that the developed method efficiently addresses the limitations of direct experiments or existing mesh-based simulations. It also suggests that digitalization of the experimental-simulation process is achievable to a considerable extent.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.133-146
• /
• 2001

We report the results of structural field observation and measurement of anisotropy of magnetic susceptibility (AMS) of the diamictitic Hwanggangri Formation distributed in Chungju-Suanbo area of the Okchon Belt, Korea. The outcrops of the Hwanggangri Formation show two types of cleavage in general: slaty cleavage (SI) and crenulation cleavage (5z). 5] cleavage is, however, well observable only in the notheastem (NE) part of study area, while overwhelmed by 52 cleavage in the southwestern (5W) part, indicating stronger later deformation in 5W part of the study area. This partitioning of the study area is corroborated by both IRM and AMS parameters: NE part of the study area is characterized by higher IRM intensity, higher bulk magnetic susceptibility, higher AM5 degree, and by oblate shape of magnetic susceptibility ellipsoid. Their values become drastically lowered toward southwest, and reach to a stable minimum in the whole 5W part of the study area. In addition, degree of both metamorphism and deformation tends to increase gradually from northeast toward southwest and also from northwest toward southeast in the study area. Based on the distribution pattern of the principal axes ( $k_1, k_2, k_3$ axes) of magnetic anisotropy ellipsoids revealed in the NE part of the study area, three episodes of deformation ( $D_1, D_2, D_3$ ) are recognized: D_1$ deformation produced $S_2$ cleavage with NE-5W trend, which is caused by a strong NW-SE tlattening of a coaxial pure shear. $D_2$ deformation produced 5z cleavage characterized by a non-coaxial deformation. It was caused by a ductile or semi-ductile thrusting toward NW and concurrent sinistral shearing along $S_2$ cleavage plane. Lastly, $D_3$ deformation produced tlexural folding of all previous structures with a nearly horizontal NE fold axis. Distribution pattern of the principal axes of magnetic anisotropy ellipsoid from the SW part of the study area, on the other hand, does not show any coherency among sites or samples. We interpret that this dispersed pattern of $k_1, k_2, k_3$ axes together with lower anisotropy strength indicates that magnetic fabrics in the SW part have been disturbed either by a superposition of strong deformation/metamorphism or by a kind of reciprocal strain due to an overlapping of $D_1$ and $D_2$ or by both processes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.39-55
• /
• 1992

In this research, a Three Level Decomposition technique has been developed for configuration design optimization of truss structures. In the first level, as design variables, behavior variables are used and the strain energy has been treated as the cost function to be maximized so that the truss structure can absorb maximum energy. For design constraint of the optimal design problem, allowable stress, buckling stress, and displacement under multi-loading conditions are considered. In the second level, design problem is formulated using the cross-sectional area as the design variable and the weight of the truss structure as the cost function. As for the design constraint, the equilibrium equation with the optimal displacement obtained in the first level is used. In the third level, the nodal point coordinates of the truss structure are used as coordinating variable and the weight has been taken as the cost function. An advantage of the Three Level Decomposition technique is that the first and second level design problems are simple because they are linear programming problems. Moreover, the method is efficient because it is not necessary to carry out time consuming structural analysis and techniques for sensitivity analysis during the design optimization process. By treating the nodal point coordinates as design variables, the third level becomes unconstrained optimal design problems which is easier to solve. Moreover, by using different convergence criteria at each level of design problem, improved convergence can be obtained. The proposed technique has been tested using four different truss structures to yield almost identical optimum designs in the literature with efficient convergence rate regardless of constraint types and configuration of truss structures.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.49-59
• /
• 1984

Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.

• Journal of the Korean Geographical Society
• /
• v.38
• /
• pp.15-36
• /
• 1988

In this paper, I consider the development of methods in contemporary human geography in terms of a dialectical relation of action and structure, and try to draw a new horizon of method toward which geographical research and spatial theory would develop. The positivist geography which was dominent during 1960s has been faced both with serious internal reflections and strong external criticisms in the 1970s. The internal reflections that pointed out its ignorance of spatial behavior of decision-makers and its simplication of complex spatial relations have developed behavioural geography and systems-theoretical approach. Yet this kinds of alternatives have still standed on the positivist, geography, even though they have seemed to be more real and complicate than the previous one, The external criticisms that have argued against the positivist method as phenomenalism and instrumentalism suggest some alternatives: humanistic geography which emphasizes intention and action of human subject and meaning-understanding, and structuralist geography which stresses on social structure as a totality which would produce spatial phenomena, and a theoretical formulation. Human geography today can be characterized by a strain and conflict between these methods, and hence rezuires a synthetic integration between them. Philosophy and social theory in general are in the same in which theories of action and structural analysis have been complementary or conflict with each other. Human geography has fallen into a further problematic with the introduction of a method based on so-called political ecnomy. This method has been suggested not merely as analternative to the positivist geography, but also as a theoretical foundation for critical analysis of space. The political economy of space with has analyzed the capitalist space and tried to theorize its transformation may be seen either as following humanistic(or Hegelian) Marxism, such as represented in Lefebvre's work, or as following structuralist Marxism, such as developed in Castelles's or Harvey's work. The spatial theory following humanistic Marxism has argued for a dialectic relation between 'the spatial' and 'the social', and given more attention to practicing human agents than to explaining social structures. on the contray, that based on structuralist Marxism has argued for social structures producing spatial phenomena, and focused on theorising the totality of structures, Even though these two perspectives tend more recently to be convergent in a way that structuralist-Marxist. geographers relate the domain of economic and political structures with that of action in their studies of urban culture and experience under capitalism, the political ecnomy of space needs an integrated method with which one can overcome difficulties of orthhodox Marxism. Some novel works in philosophy and social theory have been developed since the end of 1970s which have oriented towards an integrated method relating a series of concepts of action and structure, and reconstructing historical materialism. They include Giddens's theory of structuration, foucault's geneological analysis of power-knowledge, and Habermas's theory of communicative action. Ther are, of course, some fundamental differences between these works. Giddens develops a theory which relates explicitly the domain of action and that of structure in terms of what he calls the 'duality of structure', and wants to bring time-space relations into the core of social theory. Foucault writes a history in which strategically intentional but nonsubjective power relations have emerged and operated by virtue of multiple forms of constrainst wihthin specific spaces, while refusing to elaborate any theory which would underlie a political rationalization. Habermas analyzes how the Western rationalization of ecnomic and political systems has colonized the lifeworld in which we communicate each other, and wants to formulate a new normative foundation for critical theory of society which highlights communicatie reason (without any consideration of spatial concepts). On the basis of the above consideration, this paper draws a new norizon of method in human geography and spatial theory, some essential ideas of which can be summarized as follows: (1) the concept of space especially in terms of its relation to sociery. Space is not an ontological entity whch is independent of society and has its own laws of constitution and transformation, but it can be produced and reproduced only by virtue of its relation to society. Yet space is not merlely a material product of society, but also a place and medium in and through which socety can be maintained or transformed.(2) the constitution of space in terms of the relation between action and structure. Spatial actors who are always knowledgeable under conditions of socio-spatial structure produce and reproduce their context of action, that is, structure; and spatial structures as results of human action enable as well as constrain it. Spatial actions can be distinguished between instrumental-strategicaction oriented to success and communicative action oriented to understanding, which (re)produce respectively two different spheres of spatial structure in different ways: the material structure of economic and political systems-space in an unknowledged and unitended way, and the symbolic structure of social and cultural life-space in an acknowledged and intended way. (3) the capitalist space in terms of its rationalization. The ideal development of space would balance the rationalizations of system space and life-space in a way that system space providers material conditions for the maintainance of the life-space, and the life-space for its further development. But the development of capitalist space in reality is paradoxical and hence crisis-ridden. The economic and poltical system-space, propelled with the steering media like money, and power, has outstriped the significance of communicative action, and colonized the life-space. That is, we no longer live in a space mediated communicative action, but one created for and by money and power. But no matter how seriously our everyday life-space has been monetalrized and bureaucratised, here lies nevertheless the practical potential which would rehabilitate the meaning of space, the meaning of our life on the Earth.