• Transactions of Materials Processing
• /
• v.23 no.7
• /
• pp.431-438
• /
• 2014

For electromagnetic forming(EMF) the most important feature is a forming coil which creates the electromagnetic force(Lorentz force), using current density and a magnetic field. Most previous papers have concentrated on the final configuration of the blank or the efficiency of EMF process. Studies focused on the design parameters affected by the forming coil performance have not been conducted. In order to design a suitable forming coil for an object, the current study uses LS-DYNA EM-Module to not only optimize the coil but also to examine the effect of coil performance. By this method a suitable forming coil was made and tested to determine whether or not good formability was achieved in a free bulge test Numerical analysis was also used. The workpiece was Al 1100-O with a thickness of 1.27mm and the coil was made from copper CW004A, which has good electrical conductivity and is suitable for electrical components.

• Journal of Surface Science and Engineering
• /
• v.37 no.3
• /
• pp.146-151
• /
• 2004

Indium tin oxide (ITO) is widely used to make a transparent conducting film for various display devices and opto-electric devices. In this study, ITO films on glass substrate were fabricated by inductively coupled plasma (ICP) assisted dc magnetron sputtering. A two-turn rf coil was inserted in the process chamber between the substrate and magnetron for the generation of ICP. The substrates were not heated intentionally. Subsequent post-annealing treatment for as-deposited ITO films was not performed. Low-temperature deposition technique is required for ITO films to be used with heat sensitive plastic substrates, such as the polycarbonate and acrylic substrates used in LCD devices. The surface roughness of the ITO films is also an important feature in the application of OLEDs along with the use of a low temperature deposition technique. In order to obtain optimum ITO thin film properties at low temperature, the depositions were carried out at different condition in changing of Ar and $O_2$ gas mixtures, ICP power. The electrical, optical and structural properties of the deposited films were characterized by four-point probe, UV/VIS spectrophotometer, atomic force microscopy(AFM) and x-ray diffraction (XRD). The electrical resistivity of the films was -l0$^{-4}$ $\Omega$cm and the optical transmittance in the visible range was ＞85%. The surface roughness ( $R_{rms}$) was -20$\AA$.>.

• Nuclear Engineering and Technology
• /
• v.37 no.2
• /
• pp.201-206
• /
• 2005

Fretting, which is a special type of wear, is defined as small amplitude relative motion along the contacting interface between two materials. The structural integrity of steam generators in nuclear power plants is very much dependent upon the fretting wear characteristics of Inconel 690 U-tubes. In this study, a finite element model that can simulate fretting wear on the secondary side of the steam generator was developed and used for a quantitative investigation of the fretting wear phenomenon. Finite element modeling of elastic contact wear problems was performed to demonstrate the feasibility of applying the finite element method to fretting wear problems. The elastic beam problem, with existing solutions, is treated as a numerical example. By introducing a control parameter s, which scaled up the wear constant and scaled down the cycle numbers, the algorithm was shown to greatly reduce the time required for the analysis. The work rate model was adopted in the wear model. In the three-dimensional finite element analysis, a quarterly symmetric model was used to simulate cross tubes contacting at right angles. The wear constant of Inconel 690 in the work rate model was taken as $K=26.7{\times}10^{-15}\;Pa^{-1}$ from experimental data obtained using a fretting wear test rig with a piezoelectric actuator. The analyses revealed donut-shaped wear along the contacting boundary, which is a typical feature of fretting wear.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.1
• /
• pp.3-12
• /
• 2002

This research work is to investigate influences of the Opera House in Arts Center caused by the twin tunnel construction. The Opera House of 3D structural feature with various type of foundations and adjacent twin tunnels are modeled in 3-Dimensional mesh for FEM analysis. Confirmation of safety is essential for this particular type of structure, and attention level and warning level of control criteria are examined for the protection of the Opera House by means of the analytical results.

• Journal of Computational Design and Engineering
• /
• v.1 no.1
• /
• pp.48-54
• /
• 2014

In this paper, the authors propose a system for assisting mold designers of plastic parts. With a CAD model of a part, the system automatically determines the optimal ejecting direction of the part with minimum undercuts. Since plastic parts are generally very thin, many rib features are placed on the inner side of the part to give sufficient structural strength. Our system extracts the rib features from the CAD model of the part, and determines the possible ejecting directions based on the geometric properties of the features. The system then selects the optimal direction with minimum undercuts. Possible ejecting directions are represented as discrete points on a Gauss map. Our new point distribution method for the Gauss map is based on the concept of the architectural geodesic dome. A hierarchical structure is also introduced in the point distribution, with a higher level "rough" Gauss map with rather sparse point distribution and another lower level "fine" Gauss map with much denser point distribution. A system is implemented and computational experiments are performed. Our system requires less than 10 seconds to determine the optimal ejecting direction of a CAD model with more than 1 million polygons.

• Journal of the Speleological Society of Korea
• /
• no.84
• /
• pp.1-9
• /
• 2008

Since the existing cave type classification has no variety but was limited to the structural, genetical and dimensional classification, we need the new cave type classification. When we analyze the theoretical background of cluster analysis, the cave type can be classified in consideration of diverse variables depending on the selection of variables to use and the usability of such classification is very high. With the practical consideration on the internal environment of cave and surrounding environment, three classifications are available; first, numerical classification by the dimension and form of cave; second, classification by the use of land out of the cave and geographic features; third, classification by the feature of location related to the surrounding areas of cave.

• Steel and Composite Structures
• /
• v.8 no.5
• /
• pp.343-359
• /
• 2008

In the present study, an efficient method for the optimum design of three-dimensional (3D) steel framed structures is proposed. In this method, in addition to choosing the best position of columns based on architectural requirements, the optimum cross-sectional dimensions of elements are determined. The preliminary design variables are considered as the number of columns in structural plan, which are determined by a direct optimization method suitable for discrete variables, without requiring the evaluation of derivatives. After forming the geometry of structure, the main variables of the cross-sectional dimensions are evaluated, which satisfy the design constraints and also achieve the least-weight of the structure. To reduce the number of finite element analyses and the overall computational time, a new third order approximate function is introduced which employs only the diagonal elements of the higher order derivatives matrices. This function produces a high quality approximation and also, a robust optimization process. The main feature of the proposed techniques that the higher order derivatives are established by the first order exact derivatives. Several examples are solved and efficiency of the new approximation method and also, the proposed method for the best position of columns in 3D steel framed structures is discussed.

• Journal of the Korean Institute of Rural Architecture
• /
• v.12 no.1
• /
• pp.41-48
• /
• 2010

A house is basic unit of human being living space and it reflects an occupation, family relation, a life style and sense of value of resident. The purpose of this study was to research the continuity of traditional elements and contemporary change of Japanese houses by field study and literature research. The subject of this study was sixteen houses of Miyashiro, Saitama pref. in Japan. The results of this study are as follow as. First, the traditional elements of contemporary Japanese houses are tatami floor room, tsuzukima, zashiki, dokonoma, butsudan, amado. Second, the tatami is symbol of Japanese living space. Wasizus maintains a traditional characteristic, but it is developed and fixed properly change in contemporary life. Third, the traditional elements of Japanese houses are continuing in the modern houses, and they are continuously changed the feature from recreate. It can be a connection of a hereditary factor of residential culture. Four, the continuity of modern change and traditional element of the Japanese houses can be understood the change of the structural and spatial responding method to accommodates a life.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.176-183
• /
• 2009

This study was intended to define the spatial concept of the boundary structure of the architectural space as well as evaluate the Hyangdan which well represents the features of Korean traditional building in such a way of reviewing the building structure of Korean traditional residential space. The boundary is categorized into visible boundary and invisible boundary which was also functionally classified into the features of isolating, passing, mediating and overlapping. The major elements comprising the boundary structure was analyzed by the characteristic of the pattern so as to define them as the concept of surrounding, duality, hierarchism, continuity and overlapping. Based on such concepts, a boundary structural characteristics of Hyangdan were reevaluated and outlined as follows. The surrounding feature was seen through the outer side of the structure surrounded, two courtyards and eaves, and a duality showing both the closure of main house and openness of detached house was seen through the characteristics of surrounding structure. And the continuous activities toward the inner room and the empty space to link them in a systematic way and repeatedly aligned rooms reveal the overlapping as continuous and transitional space. And finally, an elevated stylobate demonstrates the hierarchical features of the structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1167-1174
• /
• 2006

Text region detection from a natural scene is useful in many applications such as vehicle license plate recognition. Therefore, in this paper, we propose a text region extraction method using pattern histogram of character-edge maps. We create 16 kinds of edge maps from the extracted edges and then, we create the 8 kinds of edge maps which compound 16 kinds of edge maps, and have a character feature. We extract a candidate of text regions using the 8 kinds of character-edge maps. The verification about candidate of text region used pattern histogram of character-edge maps and structural features of text region. Experimental results show that the proposed method extracts a text regions composed of complex background, various font sizes and font colors effectively.