• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.385-392
• /
• 2001

The stiffness of pavement is scarcely considered in structural analysis of the superstructure bridge. It will be reasonable in the case of asphalt concrete pavement over concrete deck plate because stiffness of the pavement compared with concrete deck plate can be ignored. Additionally, it is considered correct to do a design with a safety. However, various pavement materials which have even value reaching to the elastic modulus of concrete are applied to the orthotropic steel deck plate which has a relatively less stiffness comparing with the concrete deck plate. In this paper, the steel plate deck of the bridge of real project was modeled considering the pavement stiffness for the FEM analysis and the linear elastic analysis was performed. It was assumed to be perfectly bonded between the steel plate deck and the pavement and the temperature effect was ignored. It was analyzed on the vertical deflection of steel deck plate influencing to the serviceability of pavement and the bending stress of steel deck plate related to the fatigue life. As a result, It was indicated that the structural behavior of the orthotropic steel deck plate could be affected by the stiffness of pavement in some cases.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.3
• /
• pp.35-43
• /
• 2017

The Hong Nang Sida temple is a cultural heritage that must be preserved due to the historical and cultural values that are highly evaluated in the world. The main sanctuary of Hong Nang Sida temple, presumed to have been built in 11th to 12th centuries, has been exposed in the open air for a long time after the collapse. Therefore, it is necessary to reconstruct the original shape of the Hong Nang Sida temple to reflect the original shape. To do this, it is necessary to examine the overall structure according to the restoration shape. For this purpose, this study analyzes the construction and configuration types for main sanctuary Mandapa of Hong Nang Sida temple, and conducts structural modeling according to actual and restoration plans. The structural and behavioral characteristics are analyzed by comparing stress and displacement values by measurement locations. In addition, we will examine the vertical load distribution by the layers of each wall and cobel arch of the Mandapa using the load distribution method.

• Korea Journal of Hospital Management
• /
• v.12 no.2
• /
• pp.1-24
• /
• 2007

The medical fee reimbursement denied by HIRA(Health Insurance Review Agency) amounted to about 1.2% of the total medical fee claim to HIRA for reimbursement. Most of the denials stem from the inappropriate prescriptions of medical staff violating the medical fee review standards issued by HIRA. Considering the significant impacts of the standards observance behavior on the hospitals' financial viability, we attempted to analyze the predisposition factors of medical staffs' review standards observance behavior. The TPB(Theory of Planned Behavior) was adopted as the theoretical framework of the analysis. Data were collected by administrating a survey on the concepts included in TPB model to the 187 medical staff of a tertiary care hospital. Of the 187 questionaries distributed, 150 were responded resulting 80.2% of response rate. The mean differences among the groups classified by age group, years of experience, medical specialty and gender were analysis using ANOVA. The relationships among the TPB concepts were analysed by applying the Structural Equations Modeling method. The TPB model consists of three exogenous concepts (attitude toward the behavior, subjective norm, and perceived behavioral control) and two endogenous concepts (intention and the behavior). The results of ANOVA indicated significant mean differences among the groups classified by the medical staff's age, years of experience, and medical specialty. The older and the more experienced had the higher mean of observance behavior score. The results of Structural Equations analysis showed that the subjective norm and perceived behavioral control had statistically significant influences on intention, but the influence of attitude to intention was not statistically significant. The influences of perceived behavioral control and intention on behavior were significant. Based on these results the theoretical and practical implications were discussed.

• Steel and Composite Structures
• /
• v.34 no.4
• /
• pp.487-497
• /
• 2020

During the last few decades, fluid viscous dampers have been significantly improved in terms of performance and reliability. Viscous dampers dissipate the input energy into heat and the increased temperature may damage internal seals of the damper. As a result, thermal compensation is crucial for almost all fluid viscous dampers. In this study, while referring to the main working principles of the recently developed bypass viscous damper in Iran, a comprehensive case study is conducted on a RC building having diagonal braces equipped with such viscous dampers. Experimental results of a small-scale bypass viscous damper is presented and it is shown that the currently available simplified Maxwell models can simulate behavior of the bypass viscous damper with good accuracy. Using a case study, contribution of bypass viscous dampers to seismic behavior of structural and non-structural elements are investigated. A designed procedure is adopted to increase damping ratio of the building from 3% to 15%. In this way, reductions of 25% and 13% in the required concrete and steel rebar materials have been achieved. From nonlinear time history analyses, it is observed that bypass viscous dampers can greatly improve seismic behavior of structural elements and non-structural elements.

• Magazine of the Korea Institute for Structural Maintenance and Inspection
• /
• v.19 no.1
• /
• pp.22-30
• /
• 2015

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.36-48
• /
• 1999

Fatigue life and crack retardation behavior after penetration were experimentally examined using surface pre-cracked specimens of aluminium alloy 5083. The Wheeler model retardation parameter was used successfully to predict crack growth behavior after penetration. By using a crack propagation rule, the change in crack shape after penetration can be evaluated quantitatively. Advanced, waveform-based acoustic emission (AE) techniques have been successfully used to evaluate signal characteristics obtained form fatigue crack propagation and penetratin behavior in 6061 aluminum plate with surface crack under fatigue stress. Surface defects in the structural members are apt to be origins of fatigue crack growth, which may cause serious failure of the whole structure. The nondestructive analysis on the crack growth and penetration from these defects may, therefore, be one of the most important subjects on the reliability of the leak before break (LBB) design. The goal of the present study is to determine if different sources of the AE could be identified by characteristics of the waveforms produced from the crack growth and penetration. AE signals detected in four stages were found to have different signal per stage. With analysis of waveform and power spectrum in 6061 aluminum alloys with a surface crack, it is found to be capabilities on real-time monitoring for the crack propagation and penetration behavior of various damages and defects in structural members.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.1
• /
• pp.131-147
• /
• 2016

This study investigated the relationship between fashion behavior, impression management behavior, and career success. A conceptual model and hypotheses were established based on theoretical linkages between the constructs. Thereafter, empirical data were collected using a set of questionnaires. For this reason, the sample was taken from 720 office workers' who worked at 14's Korea Enterprise, 697 of which was used for an empirical analysis (sample: men over 30 years of age and more than three years continuous service). This study conducted an exploratory factor analysis and confirmatory factor analysis for the validity test. Cronbach's alpha test is used for the reliability test. Moreover, PLS structural equation modeling (SEM) was employed to test hypothesized relationships in the conceptual model (SPSS 20.0 window/Smart PLS 3.0). This study shows that the proposed model is reasonably fit to the actual data. The following results were obtained from the analyses. First, fashion behavior and impression management behavior is positively related to career success. The result shows that economics of the fashion behaviors sub-types were statistically more significant to influence career success. The self-focused of the impression management behavior sub-types were more than statistically significant to influence career success. This finding has great implications to understand self-management behavior and the career success of male office workers.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.3
• /
• pp.45-55
• /
• 2018

The arched stone bridge has been continuously deteriorated and damaged by the weathering and corrosion over time, and also natural disaster such as earthquake has added the damage. However, masonry stone bridge has the behavior characteristics as discontinuum structure and is very vulnerable to lateral load such as earthquake. So, it is necessary to analyze the dynamic behavior characteristics according to various design variables of arched stone bridge under seismic loads. To this end, the arched stone bridge can be classified according to arch types, and then the discrete element method is applied for the structural modelling and analysis. In addition, seismic loads according to return periods are generated and the dynamic analysis considering the discontinuity characteristics is carried out. Finally, the dynamic behavior characteristics are evaluated through the structural safety estimation for slip condition.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.257-270
• /
• 2000

The objective of this study is to develop a damage model based on damage mechanics that can be used to analyze the mechanical behavior of structures with defects and the global behavior of damaged structures. A modified second order damage tensor that can be applied to finite element analysis is used to reflect the effect of damage. The damage stress computed from the effective stress is considered as an additional loading term acting on nodes and can represent the effect of crack surface. The accuracy of the proposed algorithm is verified by comparing the analysis results with the experimental data from other studies and the analysis results based on transverse isotropic theory. The developed damage model is applied to the analyses of structures with cracks under linear elastic condition. The comparisons confirmed that the quantitative analysis of the structural behavior due to crack orientation and multiple sets of cracks is possible. Also, the damage caused by rock excavation and fault zone is analyzed. The results also showed that the developed model can effectively analyze the global behavior of damaged structures.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.5
• /
• pp.567-575
• /
• 2010

The mechanical properties of Carbon nanotube is superior such that it can be used in many areas of engineering field in the future, though the analysis of the mechanical behavior of nanotube is expensive due to its small size and uniqueness when the molecular dynamics or a generalized function theory is applied. To overcome these disadvantages, the force field between Carbon atoms can be substituted by structural members. In this study, main forces between atoms in Carbon nanotube are described by 0.1 nanometer length circular beams and linear behaviors under compression are investigated. The linear behavior is in good agreement with results by other methods. This method can be used in nonlinear analysis of nanotube when the beam elements are properly configured.