• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.334-334
• /
• 2013

In the past decade, the infrared detectors based on intersubband transition in quantum dots (QDs) have attracted much attention due to lower dark currents and increased lifetimes, which are in turn due a three-dimensional confinement and a reduction of scattering, respectively. In parallel, focal plane array development for infrared imaging has proceeded from the first to third generations (linear arrays, 2D arrays for staring systems, and large format with enhanced capabilities, respectively). For a step further towards the next generation of FPAs, it is envisioned that a two-dimensional metal hole array (2D-MHA) structures will improve the FPA structure by enhancing the coupling to photodetectors via local field engineering, and will enable wavelength filtering. In regard to the improved performance at certain wavelengths, it is worth pointing out the structural difference between previous 2D-MHA integrated front-illuminated single pixel devices and back-illuminated devices. Apart from the pixel linear dimension, it is a distinct difference that there is a metal cladding (composed of a number of metals for ohmic contact and the read-out integrated circuit hybridization) in the FPA between the heavily doped gallium arsenide used as the contact layer and the ROIC; on the contrary, the front-illuminated single pixel device consists of two heavily doped contact layers separated by the QD-absorber on a semi-infinite GaAs substrate. This paper is focused on analyzing the impact of a two dimensional metal hole array structure integrated to the back-illuminated quantum dots-in-a-well (DWELL) infrared photodetectors. The metal hole array consisting of subwavelength-circular holes penetrating gold layer (2DAu-CHA) provides the enhanced responsivity of DWELL infrared photodetector at certain wavelengths. The performance of 2D-Au-CHA is investigated by calculating the absorption of active layer in the DWELL structure using a finite integration technique. Simulation results show the enhanced electric fields (thereby increasing the absorption in the active layer) resulting from a surface plasmon, a guided mode, and Fabry-Perot resonances. Simulation method accomplished in this paper provides a generalized approach to optimize the design of any type of couplers integrated to infrared photodetectors.

• The Journal of the Korea Contents Association
• /
• v.20 no.7
• /
• pp.438-450
• /
• 2020

This study examined the relationship between demographic characteristics, satisfaction of operating factors in college lifelong education, satisfaction of college lifelong education, and recommendation intention for 1,782 adult learners of college lifelong education (N=1782). As a result of Hypothesis 1, gender and age were found to have a significant effect in all areas of college lifelong education satisfaction (education content, pedagogy, instructor, educational environment, system, support), while education level did not. In addition, the learning time was verified to affect only the educational content, educational environment, and satisfaction with the system and support. As a result of Hypothesis 2, it was found that the satisfaction of the operating factors of the instructor, system, and support had a positive effect on the satisfaction of college lifelong education, and the environmental factors of education had a negative effect. As a result of verification of Hypothesis 3, it was found that the satisfaction of college lifelong education influenced the intention of recommendation. The purpose of this study is to determine the degree of satisfaction with the operational factors of college lifelong education, the satisfaction of college lifelong education, and the intention of recommendation for adult learners of a university that is operating a degree program dedicated to adult learners who are actually practicing the transition to a lifelong education system of university as an innovation in higher education. The relationship verification is expected to provide practical implications for constructing a new college lifelong education model in the future.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.636-643
• /
• 1999

Green-emission intensity of a $Zn_{2-x}Mn_xSiO_4$ phosphor, which is a potential candidate as a green component in PDP device, significantly increases provided that the compound is additionally heat treated at 900$^{\circ}C$ after solid state reaction at 1300$^{\circ}C$. In order to verify origin of such an intensity enhancement after the additional heat treatment in association with the electronic and local structural change at around Mn ions, the Mn K-edge X-ray absorption spectra were recorded. From the analyses of the preedge peak corresponding to $1s{\rightarrow}3d$ bound state transition and XANES spectrum, it is known that most Mn ions are in +2 oxidation state and substitute Zn ion site regardless of the thermal treatment. In addition, EXAFS analyses revealed that Mn ions formed $MnO_4$ tetrahedra with the Mn-O bond length shortened by 0.01${\AA}$ and with reduced Debye-Waller factor in the thermally treated sample.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2009

In this study, we performed growth of InGaN/GaN multi quantum well (MQW) structures on semi-polar (1-10]) GaN facet on 8-degree off oriented stripe patterned (100) Si substratcs by MOVPE. The structural and optical properties of the InGaN/GaN multi quantum well (MQW) structures grown on (1-101) GaN stripe depend on $NH_3$ flow rate, TMI flow rate and growth temperature are characterized by cathodoluminescence (CL) and scanning electron microscopy (SEM). With the decrease of $NH_3$ flow rate, the threading dislocation of (1-101) GaN is considerably reduced. We could control the transition wavelength of InGaN/GaN MQW structures from 391.5 nm to 541.2 nm depend on the growth conditions.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.51-54
• /
• 2007

By substituting Cr in inverse-spinel $Fe_3O_4,\;Cr_xFe_{3-x}O_4$ thin film samples were prepared by sol-gel spin-coating method and their structural electronic, and magnetic properties were analyzed. X-ray diffraction indicates that the lattice constant decrease with increasing Cr composition (x). This result can be explained in terms of occupation of octahedral sites by $Cr^{3+}$ ions with smaller ionic radius than that of $Fe^{3+}$ Vibrating sample magnetometry measurements on the samples at room temperature revealed that saturation magnetization ($M_s$) decrease by Cr substitution, explainable by comparing spin magnetic moment among the related transition-metal ions. A decrease of magnetoresistence effect with x was observed, similar to that of $M_s$. The coercivity of the $Cr_xFe_{3-x}O_4$ films was found to increase with x, attributed to the increase of magnetic anisotropy by the existence of octahedral $Cr^{3+}(d^3)$.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.602-612
• /
• 2011

Jeju Island, a volcanic island located in South Korea, has been one of the main targets of geophysical and/or geological studies because of its tectonic importance related to the volcanism and tectonic link to the southern part of the Korean Peninsula. Recently, as a number of broad-band magnetotelluric (MT) measurements were made, we have examined the deep part of the island. In such an insular setting, it is not easy to properly recover the deep structures such as the lower crust and the upper crust using MT data, because their low-frequency components are strongly affected by the surrounding sea of the island. In this study, we apply the sea-effect correction to the existing MT data collected at a total of 102 sites in Jeju Island. The sea-effect correction makes remarkable changes in the observed MT data at frequencies below 1 Hz, clearly indicating the existence of a conductive lower crust. The 2-D inversion results for both Jeju Southern Line (JSL) and Jeju Northern Line (JNL) show that the transition zone separating the resistive upper crust and conductive lower crust exists at a depth of 20 km on average.

• Korean Journal of Social Welfare
• /
• v.59 no.3
• /
• pp.147-174
• /
• 2007

This study examines how path dependency of working poor labor market segmented from the primary and the secondary labor market affects employment and quality of employment of working poor. It Further examines how path dependency makes working poor to remain in the labor market and makes it difficult for them to escape from a vicious poverty cycle. Data is based on the $3{\sim}7th$ Korea Labor and Income Panel Study(KLIPS). Markov's transition probability and discrete-time hazard analysis are used for analysis. This study finds that Korea labor market is divided into three parts; the primary labor market, the secondary labor market and the working poor labor market. The proportion of employed poor has been reduced, but the proportion of non economically-active working poor has been increased and has become the main group among the working poor. This shows that labor demand of working poor is fundamentally lacking and there are structural barriers that block working poor's employment itself. The regression analysis shows that the longer working poor labor market participation is, the lower poverty-exit rate. This is an evidence of vicious poverty cycle that the poor have little chance to exit from working poor labor market, once they step into it. Therefore, the longer their participation in poor labor market, the more likely they would move only within the closed working poor labor market. Consequently, it is necessary to fundamentally reform labor market structure and to alleviate negative perception and discrimination about the poor labor while activating labor demand.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.5
• /
• pp.241-246
• /
• 2012

$Yb^{3+}$, $Er^{3+}$ co-doped $SrMoO_4$ ($SrMoO_4$ : $Yb^{3+}/Er^{3+}$) specimens have been successfully synthesized via the complex citrate-gel method and their structural and optical properties were investigated in detail. Under 980 nm excitation, $SrMoO_4$ : $Yb^{3+}/Er^{3+}$ UC phosphors have been emitted strong green luminescence at 530 and 550 nm with weak red emission around 670 nm corresponding to the intra 4f transitions of $Er^{3+}$ ($^4F_{9/2}$, $^2H_{11/2}$, $^4S_{3/2}$) ${\rightarrow}$ $Er^{3+}$ ($^4I_{15/2}$). The optimal doping concentrations of $Er^{3+}$ and $Yb^{3+}$ ions were verified to 2/16 mol% and a possible upconversion mechanism depending on pump power dependence is studied in detail.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.5
• /
• pp.204-209
• /
• 2007

We synthesized a series of $CaS_{1-x}Se_x:Eu$ red-emitting phosphors for application in phosphor-converted three-band white light emitting diode(LED). The photoluminescence and structural properties of $CaS_{1-x}Se_x:Eu$ were examined. The $CaS_{1-x}Se_x:Eu$ phosphors have a strong absorption at 455 nm, which is the emission wavelength of a blue LED. CaS:Eu has a red omission peak at 651 nm due to the $4f^65d^1(T_{2g}){\rightarrow}4f^7(^8S_{7/2})$ transition of the $Eu^{2+}$. The emission peak of $CaS_{1-x}Se_x:Eu$ is shifted from 651 to 598 nm with increasing Se content. $CaS_{1-x}Se_x:Eu$ can be used as wavelength-tunable red-emitting phosphors pumped by a blue LED. We also fabricated a three-band white LED by doping $SrGa_2S_4:Eu$ and $CaS_{0.50}Se_{0.50}:Eu$ phosphors onto a blue LED chip.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.681-688
• /
• 1996

To investigate the effort of drying methods on the physicochemical properties of agar, gel strength, viscosity, melting and setting point, and phase transition by differential scanning calorimetery (DSC) during its heating were determined. In addition the structural differences of agar powder by scanning electron microscope (SEM) was examined. The most shortest onset temperature of gel strength increase was extruding method among any other methods. Viscosity of agar with hot air method, 400.00 cps at $45^{\circ}C$, was markedly increased, but with spraying and extruding ones were little change. The melting and setting point, and the temperature for maximum endothermic and enthalpy for agar with extruding one, $80.01^{\circ}C,\;36.05^{\circ}C\;and\;61.72^{\circ}C,\;0.73\;cal/g$, respectively, were lowest among the drying ones. But in the case of reheating after gelling, there were little change in all methods. Observing the surface structure of agar with SEM, extruding method showed the most unstable with absorptive property.