• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.04a
• /
• pp.139-146
• /
• 1997

The main purpose of this paper is to investigate the near-optimal parameters of continuous beam subject to a moving load. The computer-aided optimization technique is used to obtain the near-optimal parameters. The computer program is developed to obtain the natural frequency parameters and the forced vibration responses to a transit point load for the continuous beam with variable support spacing, mass and stiffness. The optimization function to describe the design efficiency is defined as a linear combination of four dimensionless span characteristics: the maximum dynamic stress; the stress difference between span segments; the rms deflection under the transit point load; and the total span mass. Studies of three span beams show that the beam with near-optimal parameters can improve design efficiency by 12 to 24 percent when compared to a reference configuration beams of the same total span length.

• Proceeding of KASS Symposium
• /
• 2006.05a
• /
• pp.214-223
• /
• 2006

Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. The material property of the membrane has strong axial stiffness, but little bending stiffness. The design procedure of membrane structures are needed to do shape finding, stress-deformation analysis and cutting pattern generation. In shape finding, membrane structures are unstable structures initially. These soft structures need to be introduced initial stresses because of its initial unstable state, and happen large deformation phenomenon. Therefore, in this study, to find the structural shape after large deformation caused by initial stress, we need the shape analysis considering geometric nonlinear term. And we investigate the evaluation of shape analysis technique's convergence and efficiency according to the control method

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.80-86
• /
• 2011

Structural optimization algorithm of steel box girder bridges using improved higher-order approximate reanalysis technique is proposed in this paper. The proposed approximation method is a generalization of the convex approximation method. The order of the approximate reanalysis for each function is analytically adjusted in the optimization process. This self-adjusted capability makes the approximate structural analysis values conservative enough to maintain the optimum design point of the approximate problem. The efficiency of proposed optimazation algorithm, compared with conventional algorithm, is successfully demonstrated in the steel box girder bridges. The efficiency and robustness of proposed algorithm is also demonstrated in practical steel box girder bridges.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.4
• /
• pp.157-167
• /
• 2002

In most cases, quantity of reinforcement is determined without regard to the difference of initial strain, and status of damages when calculated the strengthening in flexure at beams. Thus, the purpose of this study is to investigate the flexural strengthening efficiency and behavior of RC beams strengthened with carbon fiber sheets(CFS) considering different status of damages. in this paper, a nonlinear analysis program considering rip-off strength and residual stress of steel bars and concrete in different status of damages is developed to predict the flexural behavior of CFS strengthened beams. Rip-off strength equation is obtained by modifying moment of inertia in the Robert's equation. And conformed developed nonlinear analysis program in variable of strengthening CFS amount and status of damages(initial, case1, case2, case3) and tension reinforcement ratio(0.2~1.0%).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.74-80
• /
• 2020

Crawler-type hydraulic devices facilitate forward and backward driving of construction equipment by converting power into mechanical energy. The existing hydraulic device performance test process is time- and labor-intensive. This study aims to improve efficiency and productivity by automating the hydraulic device production performance test processes, which have been separately conducted so far. We also used SolidWorksⓇ, a 3D modeling program, and ANSYSⓇ, a structural analysis tool, for structural analysis and to verify the suitability of fixing pins required for connecting a hydraulic device to performance test equipment. Our results that employing an automated hydraulic device performance test process improves efficiency.

• Steel and Composite Structures
• /
• v.53 no.1
• /
• pp.115-121
• /
• 2024

The present paper deals with a comprehensive study about dynamic performance and educational economic assessment of nanocomposite structures, while it focuses on truncated conical shells. Advanced structure dynamic behavior has been analyzed by means of AI techniques, which allow one to predict and optimize their performances with good accuracy for different loading and environmental conditions. The incorporation of the AI method significantly enhances the computational efficiency and is a powerful tool in designing nanocomposites and for their structural analysis. Further, an educational assessment is provided in the context of cost and practicality related to such structures in engineering education. This study showcases the capabilities of AI-enabled methods with regard to cost reduction, improvement of structural efficiency, and enhancement of learning engagement for students through certain practical examples on state-of-the-art nanocomposite technology. The results also confirm a remarkable capability of artificial intelligence regarding the optimization of both dynamic and economic aspects, which could be highly valued for further development of nanocomposite structures.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.730-736
• /
• 2009

The objective of this paper is to measure the relative technical efficiency of Korean railway transport service. Previous studies on the efficiency in Korean railway service have carried out before the structural reform of Korean railway industry in 2004, whereas this study used the latest data which reflected the impact of reform. We analyzed the efficiency in Korean railway transport by means of measuring the technical efficiencies of other countries, these were estimated with data envelopment analysis. DEA has gained great popularity in measuring efficiency in transport industry, school, government, hospital and so on in recent years. This analysis could serve as peer to help improve performance of the railway management and operation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.46-48
• /
• 2009

We demonstrated that the simple layered red phosphorescent organic light-emitting diodes are possible to have high efficiency and low driving voltage without hole injection and transport layers. The simplified OLED shows the max. current efficiency, power efficiency and quantum efficiency of 26.3 cd/A, 20.7 lm/W and 16.7 %, respectively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.199-206
• /
• 2017

This paper analyzed structural behaviors of the staggered truss system, typically used in low seismicity regions, resisting the lateral loads such as wind and seismic load. A comparative study of cost and efficiency was carried out by analysing and designing the 10- and 20-story buildings with various types of truss, including pratt, howe, warren, K-, and vierendeel, which may typically be used in staggered truss system. In design, column and truss members are selected in group, and the efficiency of the member design was judged by average demand capacity ratio of the all members in same group. And economic analysis of the system was investigated by the quantity of the structural members. As a result, staggered truss system with the pratt truss and warren truss showed the most economical and efficient performance for 10-story building, and 20-story building, respectively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.17-22
• /
• 2017

In this study, we designed the metallic reception part of a patch antenna using the phase field design method. The design object function is formulated with the S-parameter value which represent the return loss so that it is targeted to maximize radiation efficiency at a target frequency. The initial model of a patch antenna was designed via the ordinary theory based approach and its performance was enhanced by changing the structural configuration of the metallic part using the phase field design method combined with the double well potential functions. The final shape was proposed by removing the gray scale area along the structural boundary by employing a cut-off method. The proposed shape shows that the radiation efficiency at target frequency is significantly improved compared with the initial patch shape. The finite element analysis and optimization precess was performed using the commercial package COMSOL and Matlab programming.