• 대한조선학회논문집
• /
• 제54권6호
• /
• pp.476-484
• /
• 2017

The purpose of this paper is to verify the structural integrity of a region with numerous penetration-holes in offshore structures such as semi-submersible rig and FPSO. In order to effectively check the yielding and buckling strength of plate members with penetration-holes, a screening analysis program was developed with the FE analysis tool to generate fine meshed model using the theoretical and analysis methods. When a hole is appeared in the plate structure members, the flow of stress is altered such that concentrations of stress form near the hole. Stress concentrations are of concern during both preliminary and detail design and need to be addressed from the perspectives of strength. To configure the geometrical shape, very fine meshed FE analysis is needed as the most accurate method. However, this method is practically impossible to apply for the strength verifications for all perforated plates. In this paper, screening analysis method was introduced to reduce analysis tasks prior to detailed FE analysis. This method is applied to not only the peak stress calculation combined stress concentration factor with nominal stress but also nominal equivalent stress calculation considering cutout effects. The areas investigated by very fine meshed analysis were to be chosen through screening analysis without any reinforcements for penetration-holes. If screening analysis results did not satisfy the acceptance criteria, direct FE analysis method as the 2nd step approach were applied with one of the coarse meshed model considering hole or with the very fine meshed model considering the hole shape and size. In order to effectively perform the local fine meshed analysis, automatic model generating program was developed based on the MSC/PATRAN which is pre-post FE analysis program. Buckling strength was also evaluated by Common Structure Rule (CSR) adopted by IACS as the stress obtained from very fine meshed FE analysis. Due to development of the screening analysis program and automatic FE modeling program, it was able to reduce the design periods and structural analysis costs.

• Journal of the Korean Wood Science and Technology
• /
• 제45권3호
• /
• pp.343-359
• /
• 2017

건축물에서 사용되는 에너지를 줄이기 위하여 다양한 연구 및 정책이 진행되고 있으나 건축물에서 구조재 및 실내 외 마감재로 폭넓게 사용되는 목재의 열적 특성에 관한 연구는 미미한 실정이다. 이에 따라, 본 연구는 목질재료와 비 목질재료의 전열성능을 분석하기 위하여 목질재료가 주로 이용되는 주거용 건축물을 대상으로 열성능이 취약한(열교 발생) 부위를 선정하고, 각 부위별로 구조재와 마감재의 구성에 따라 총 16 Case에 대해 전열성능 분석을 실시하였다. 전열 해석 시뮬레이션 도구는 ISO 10211의 계산 방법을 따르는 Physibel Trisco를 이용하였다. 해석 부위의 모델링 역시 ISO 10211에서 제시된 기준에 의해 실시하였으며, 경계 온도 조건은 에너지절약설계기준에 따라 실내온도 $20^{\circ}C$, 실외온도 $-11.3^{\circ}C$(서울 기준)로 설정하였다. 구조는 콘크리트구조와 비 목질재료마감, 콘크리트구조와 목질재료마감 그리고 목구조에 목질재료마감의 경우에 따라 구분하였다. 부위는 벽체, 지붕, 층간바닥 및 최하층 바닥 등으로 구분하여 시뮬레이션을 진행하였다. 결과로서, 콘크리트구조의 경우 형상적 원인에 의해, 목구조의 경우 형상적인 원인에 재료적 원인이 더해져 다발적으로 열교가 발생함을 확인할 수 있었다. 추가적으로 콘크리트구조에서는 단열재의 불연속 부위에서 구조적인 열교가 발생하고 목구조에서는 구조적인 열교와 이질재료의 적용 부위에서 재료적 원인에 의한 열교가 발생하는 것을 확인할 수 있었다. 또한 콘크리트 구조에 목질 실내마감재를 적용하였을 경우에는 벽체의 선형 열관류율 값이 감소하는 것을 확인할 수 있었다.

• 대한조선학회지
• /
• 제27권3호
• /
• pp.131-136
• /
• 1990

여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

• 유통과학연구
• /
• 제14권11호
• /
• pp.91-102
• /
• 2016

Purpose - The objectives of this study are as follows. First, it aims to suggest an analysis model that has integrated the relationship between the two factors and export performance and conduct an empirical analysis of the factors. Second, the study seeks to analyze the mediating effect by setting direct channel governance as a specific activity to connect market orientation, a cultural asset, to export performance. Third, through these analyses, the study intends to apply the relationship between market orientation and direct channel governance that the existing studies have failed to observe comprehensively on SMEs in Korea. Based on these analyses, the study expects to expand the discussion of previous researches by analyzing the mediating effect of direct channel governance. Research design, data, and methodology - This study developed a model that has integrated market orientation, direct channel governance, and export performance. It established 7 hypotheses including the mediating effect of direct channel governance. Market orientation was consisted of customer orientation and competitor orientation, and 4 latent variables were measured by 18 questions. LISREL, an analysis tool of structural equation model, was used for hypothesis test and there were 183 sample for analysis. Results - The analysis results showed that customer orientation has a positive influence on direct channel governance, but competitor orientation did not have a statistically significant effect. On the contrary, export performance showed an opposite result. That is, customer orientation did not have any influence but competitor orientation had a significant influence on export performance. It was also confirmed that there was a significant influence in the relationship between channel governance and export performance. According to the analysis of mediating effect, direct channel governance had a full mediating effect between customer orientation and export performance. Conclusions - The study results demonstrated that it is important to build a direct channel governance on the export SMEs in Korea, especially since the direct channel governance complements the influence of customer orientation that does not directly influence export performance among market orientation activities. This implies that Korean export SMEs must strive to build an effective direct channel governance.

• Structural Monitoring and Maintenance
• /
• 제5권3호
• /
• pp.363-377
• /
• 2018

The proper functioning of critical points on transport infrastructure is decisive for the entire network. Tunnels and bridges certainly belong to the critical points of the surface transport network, both road and rail. Risk management should be a holistic and dynamic process throughout the entire life cycle. However, the level of risk is usually determined only during the design stage mainly due to the fact that it is a time-consuming and costly process. This paper presents a simplified quantitative risk analysis method that can be used any time during the decades of a tunnel's lifetime and can estimate the changing risks on a continuous basis and thus uncover hidden safety threats. The presented method is a decision support system for tunnel managers designed to preserve or even increase tunnel safety. The CAPITA method is a deterministic scenario-oriented risk analysis approach for assessment of mortality risks in road tunnels in case of the most dangerous situation - a fire. It is implemented through an advanced risk analysis CAPITA SW. Both, the method as well as the resulting software were developed by the authors' team. Unlike existing analyzes requiring specialized microsimulation tools for traffic flow, smoke propagation and evacuation modeling, the CAPITA contains comprehensive database with the results of thousands of simulations performed in advance for various combinations of variables. This approach significantly simplifies the overall complexity and thus enhances the usability of the resulting risk analysis. Additionally, it provides the decision makers with holistic view by providing not only on the expected risk but also on the risk's sensitivity to different variables. This allows the tunnel manager or another decision maker to estimate the primary change of risk whenever traffic conditions in the tunnel change and to see the dependencies to particular input variables.

• 한국콘텐츠학회논문지
• /
• 제14권10호
• /
• pp.697-705
• /
• 2014

본 연구는 대학의 광고활동이 증가하고 있는 상황에서 대학의 광고활동이 외부고객보다는 내부고객인 재학생들의 대학 애호도에 미치는 영향을 살펴보고자 한다. 또한 대학에 대해 외부인들이 가질 것으로 기대하는 이미지와 실제 재학생들이 지각하고 있는 이미지의 매개효과를 규명하고자 하였다. 연구 수행방법으로 변수 정의와 연구모형의 설계를 통해서 설문조사와 분석을 진행하였다. 가설검증은 AMOS 7.0을 이용한 공변량 구조방정식 분석을 통해 실시하였다. 연구의 분석결과는 대학의 광고활동에 대한 만족도가 재학생들이 인식하는 학교 이미지에 긍정적 영향을 미쳤으며 자신의 친지들이 인식하는 학교 이미지까지 긍정적일 것으로 기대하게 하고 최종적으로 대학에 대한 재학생들의 애호도를 높이는 요인임을 확인하였다. 따라서 대학의 이미지광고활동이 재학생, 부모나 친지, 재학생의 연관집단까지 대상을 확대할 필요가 있겠다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권3호
• /
• pp.1-23
• /
• 2017

Purpose With the advent of the 4th Industrial Revolution era, ICT convergence industry is leading the wave of new change. These changes in the industrial field are recognizing convergence as a strategic cooperation tool of management for creating new value. In order to achieve the research purpose, conceptual understanding of ICT convergence is summarized by focusing on concepts, features, types and cases. In addition, this study established the theoretical rationale for the determinants of ICT convergence performance, and examined previous researches related to ICT convergence. Design/methodology/approach The empirical research method is based on a survey of 510 companies including managers and mid-level practitioners who understand the contents of the relevant field, 305 data were used for analysis. We conducted exploratory factor analysis to verify the grouping of these questionnaire items and conducted confirmatory factor analysis to analyze the validity and reliability of the measurement model. Through the statistical analysis, we analyzed the structural relationship of ICT firms' competencies for convergence performance. Findings Linkage of ICT strategies established by corporations is an important factor for enhancing resource capacity and convergence ability. It is important to ensure that product innovation, consumer-oriented strategies, and ICT strategies for the implementation of business strategies are closely linked. In addition, in the convergence environment, companies should make efforts to develop convergence ability and improve organizational performance through utilization of ICT resources. From the CEO's perspective, it is necessary to understand the knowledge, technology and resources arising from the convergence environment, and to integrate with the resources possessed by the enterprise to induce the organization's performance.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권2호
• /
• pp.29-52
• /
• 2018

Purpose As the number of SNS users increases, the importance of SNS advertisement is also increasing. Thus, the purpose of this study is to analyze the effect of factors on effectiveness of SNS advertising, and expand research on users' attitude and behavior intention toward SNS advertising. Design/methodology/approach This study was designed to examine the structural relationships among SNS service attribute, users' cognitive characters, psychological factors, users' attitude and behavior intention toward SNS advertising. Concretely, SNS service attribute was presented as online interactivity, and users' cognitive characters were presented as perceived relevance and perceived intrusiveness. In addition, psychological factors were presented as presence experience and message credibility, users' attitude toward SNS advertising was presented as advertisement attitude and users' behavior intention was presented as WOM. Findings The results showed that online interactivity has a positive effect on presence experience and message credibility, but perceived intrusiveness has a negative effect on presence experience and message credibility. Perceived relevance has a positive effect on presence experience, but does not have significant effect on message credibility. Presence experience and message credibility have positive effects on advertisement attitude and WOM, and advertisement attitude also has a positive effect on WOM. Based on the results from this study, academic and practical implications can be drawn. First, the study extended the scope of research about SNS advertising through focusing on SNS service attribute and SNS users' cognitive characters and identified the relationship between presence experience, message credibility, advertisement attitude and WOM. Second, the results of this research can provide practical guidelines to develop effective advertising strategies for companies which promoting SNS as a marketing tool.

• 소음진동
• /
• 제7권2호
• /
• pp.231-238
• /
• 1997

진동하는 구조물의 평면 진동장을 측정하기 위해, 자동화된 스캐닝 레이저 도플러 진동 측정기를 개발하고 이의 성능을 시험하였다. 광섬유를 사용하여 레이저 탐침이 진동체 표면을 따라 움직일 수 있도록 하였으며, 시스템의 자동화를 이루기 위한 알고리즘을 고안하였다. 시스템의 자동화과정은, 레이저 탐침이 진동체 표면을 따라 움직이도록 하며, 표면의 각 측정 점마다 두 레이저 광선들의 초점을 맞추고, 진동 신호 데이터를 얻고 저장하는 모든 과정을 포함한다. 따라서 이 자동화 과정을 이용하여 구조물의 표면 진동장을 측정할 수 있도록 하였다. 이 진동 측정기의 성능을 시험하기 위하여, 연속신호로 가진되는 압전 원통 셸의 진동과 펄스 신호에 의해 가진되는 평판의 진동을 측정하였다. 측정결과로부터, 구조물의 평면 진동장을 측정하고 표면을 따라 전파되는 탄성파들을 분리해내기 위하여, 이 자동화된 스캐닝 레이저 도플러 진동 측정기가 유용한 측정 도구가 될 수 있음을 보였다.

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.869-886
• /
• 2016

Non-Deformable Support System (NDSS) is one of the support system analysis methods. It is likely seen as numerical analysis. Obviously, numerical modeling is the key tool for this system but not unique. Although the name of the system makes you feel that there is no deformation on the support system, it is not true. The system contains some deformation but in certain tolerance determined by the numerical analyses. The important question is what is the deformation tolerance? Zero deformation in the excavation environment is not the case, actually. However, deformation occurred after supporting is important. This deformation amount will determine the performance of the applied support. NDSS is a stronghold analysis method applied in full to make this work. While doing this, NDSS uses the properties of rock mass and material, various rock mass failure criteria, various material models, different excavation geometries, like other methods. The thing that differ NDSS method from the others is that NDSS makes analysis using the time dependent deformation properties of rock mass and engineering judgement. During the evaluation process, NDSS gives the permission of questioning the field observations, measurements and timedependent support performance. These transactions are carried out with 3-dimensional numeric modeling analysis. The goal of NDSS is to design a support system which does not allow greater deformation of the support system than that calculated by numerical modeling. In this paper, NDSS applied to the problems of Tunnel 34 of the same Project (excavated with NATM method, has a length of 2218 meters), which is driven in graphite schist, was illustrated. Results of the system analysis and insitu measurements successfully coincide with each other.