• Smart Structures and Systems
• /
• 제4권5호
• /
• pp.565-582
• /
• 2008

This paper presents a feasibility study of flexible piezoelectric paint for use in wide-band low-profile surface-mount or embeddable ultrasonic sensor for in situ structural health monitoring. Piezoelectric paint is a piezoelectric composite with 0-3 connectivity. Because of its ease of application, piezoelectric paint can be readily fabricated into sensing element with complex pattern. This study examines the characteristics of piezoelectric paint in acoustic emission signal and ultrasonic guided wave sensing. A series of ultrasonic tests including pitch catch and pencil break tests were performed to validate the ultrasonic wave sensing capability of piezoelectric paint. The results of finite element simulation of ultrasonic wave propagation, and acoustic emission generated by a pencil lead break on an aluminum plate are also presented in this paper along with corresponding experimental data. Based on the preliminary experimental results, the piezoelectric paint appears to offer a promising sensing material for use in real-time monitoring of crack initiation and propagation in both metallic and composite structures.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.29-38
• /
• 2001

The purpose of this paper is to evaluate the structural integrity of a reactor pressure vessel subjected to the pressurized thermal shock(PTS) during the transient events, such as main steam line break(MSLB) and small break loss of coolant accident(SBLOCA). For postulated surface or subsurface cracks, variation curves of stress intensity factor are obtained by using the three different methods, including ASME section XI code anlysis, the finite element alternating method and the finite element method. From the stress intensity factor curves, the maximum allowable nil-ductility transition temperatures(RT/NDT/) are determined by the tangent criterion and the maximum criterion for various crack configurations and two initial transient events. As a result of the analysis, it is noted that axial cracks have smaller maximum allowable RT$_{NDT}$ values than same-sized circumferential cracks for both the transient events in the case of the tangent criterion. Axial cracks have smaller RT$_{NDT}$ values than same-sized circumferential cracks for MSLB and circumferential cracks have smaller values than axial cracks for SBLOCA in the case of the maximum criterion.

• Structural Engineering and Mechanics
• /
• 제78권4호
• /
• pp.497-518
• /
• 2021

In this study, a new method for treating the wall boundary in smoothed particle hydrodynamics (SPH) is proposed to simulate free surface flows effectively. Unlike conventional methods of wall boundary treatment through boundary particles, in the proposed method, the wall boundary condition is directly imposed by adding boundary truncation terms to the mass and momentum conservation equations. Thus, boundary particles are not used in boundary modeling. Doing so, the wall boundary condition is accurately imposed, boundary modeling is simplified, and computation is made efficient without losing stability in SPH. Performance of the proposed method is demonstrated through several numerical examples: dam break, dam break with a wedge, sloshing, inclined bed, cross-lever rotation, pulsating tank and sloshing with a flexible baffle. These results are compared with available experimental results, analytical solutions, and results obtained using the boundary particle method.

• Structural Engineering and Mechanics
• /
• 제59권6호
• /
• pp.1095-1120
• /
• 2016

This paper investigates the change of structural characteristics of steel cable-stayed bridges after cable failure. Cables, considered as the intermediate supports of cable-stayed bridges, can break or fail for several reasons, such as fire, direct vehicle clash accident, extreme weather conditions, and fatigue of cable or anchorage. Also, the replacement of cables can cause temporary disconnection. Because of the structural characteristics with various geometric nonlinearities of cable-stayed bridges, cable failure may cause significant change to the structural state and ultimate behavior. Until now, the characteristics of structural behavior after cable failure have rarely been studied. In this study, rational cable failure analysis is suggested to trace the new equilibrium with structural configuration after the cable failure. Also, the sequence of ultimate analysis for the structure that suffers cable failure is suggested, to study the change of ultimate behavior and load carrying capacity under specific live load conditions. Using these analysis methods, the statical behavior after individual cable failure is studied based on the change of structural configuration, and distribution of internal forces. Also, the change of the ultimate behavior and load carrying capacity under specific live load conditions is investigated, using the proposed analysis method. According to the study, significant change of the statical behavior and ultimate capacity occurs although just one cable fails.

• Genomics & Informatics
• /
• 제17권4호
• /
• pp.40.1-40.9
• /
• 2019

While studies aimed at detecting and analyzing indels or single nucleotide polymorphisms within human genomic sequences have been actively conducted, studies on detecting long insertions/deletions are not easy to orchestrate. For the last 10 years, the availability of long read data of human genomes from PacBio or Nanopore platforms has increased, which makes it easier to detect long insertions/deletions. However, because long read data have a critical disadvantage due to their relatively high cost, many next generation sequencing data are produced mainly by short read sequencing machines. Here, we constructed programs to detect so-called unmapped regions (UMRs, where no reads are mapped on the reference genome), scanned 40 Korean genomes to select UMR long deletion candidates, and compared the candidates with the long deletion break points within the genomes available from the 1000 Genomes Project (1KGP). An average of about 36,000 UMRs were found in the 40 Korean genomes tested, 284 UMRs were common across the 40 genomes, and a total of 37,943 UMRs were found. Compared with the 74,045 break points provided by the 1KGP, 30,698 UMRs overlapped. As the number of compared samples increased from 1 to 40, the number of UMRs that overlapped with the break points also increased. This eventually reached a peak of 80.9% of the total UMRs found in this study. As the total number of overlapped UMRs could probably grow to encompass 74,045 break points with the inclusion of more Korean genomes, this approach could be practically useful for studies on long deletions utilizing short read data.

• East Asian Economic Review
• /
• 제20권3호
• /
• pp.365-390
• /
• 2016

This paper quantitatively compares the intrinsic features of the daily USD-GBP exchange rates in two different periods, the 1920s and the 2010s, under the same freely floating exchange rate system. Even though the foreign exchange markets in the 1920s seem to be much less organized and developed than in the 2010s, this paper finds that both the long memory volatility property and the structural break appear to be the common intrigue features of the exchange rates in the two periods by using the FIGARCH model. In particular, the long memory volatility properties in the two periods are found to be upward biased and overstated because of the structural breaks in the exchange markets. Thus this paper applies the Adaptive-FIGARCH model to consider the long memory volatility property and the structural breaks jointly. The main finding is that the structural breaks in the exchange markets affect the long memory volatility property significantly in the two periods but the degree of the long memory volatility property in the 1920s is reduced more remarkably than in the 2010s after the structural breaks are accounted for; thus implying that the structural breaks in the foreign exchange markets in the 1920s seem to be more significant.

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.13-19
• /
• 2008

In order to predict a remaining life of a plant, it is necessary to select the components that are critical to the plant life. The remaining life of those components shall be evaluated by considering the aging effect of materials used as well as numerous factors. However, when evaluating reliability of nuclear structural components, some problems are quite formidable because of lack of information such as operating history, material property change and uncertainty in damage models. Accordingly, if structural integrity and safety are evaluated by the deterministic fracture mechanics approach, it is expected that the results obtained are too conservative to perform a rational evaluation of plant life. The probabilistic fracture mechanics approaches are regarded as appropriate methods to rationally evaluate the plant life since they can consider various uncertainties such as sizes and shapes of cracks and degradation of material strength due to the aging effects. The objective of this study is to evaluate the structural integrity for a reactor pressure vessel under the small break loss of coolant accident by applying the deterministic and probabilistic fracture mechanics. The deterministic fracture mechanics analysis was performed using the three dimensional finite element model. The probabilistic integrity analysis was based on the Monte Carlo simulation. The selected random variables are the neutron fluence on the vessel inside surface, the content of copper, nickel, and phosphorus in the reactor pressure vessel material, and initial RTNDT.

• Elastomers and Composites
• /
• 제39권2호
• /
• pp.95-104
• /
• 2004

방진고무의 내한성을 향상시키기 위하여 NR 컴파운드에 유리전이온도가 상대적으로 낮은 BR을 섞거나 오일 함량을 늘리는 방법을 이용하여 새로운 컴파운드를 제작하였다. 저온환경에서 기계적물성 실험을 수행하여 NR/BR 조성비 및 오일 함량에 따른 영향을 조사하였다. BR 함량이 증가할수록 경도 및 모듈러스가 증가한 반면 인장강도 및 신율은 감소하였고, 오일 함량이 많을수록 경도, 모듈러스 및 인장강도는 감소하였으나 신율은 거의 변화가 없었다. NR/BR 블렌드 고무컴파운드는 NR과 BR의 유리 전이 온도인 $-50^{\circ}C$와 $-90^{\circ}C$에서 저장탄성계수의 급격한 전이와 손실계수인 tan ${\delta}$가 최대값을 보여 두 컴파운드간의 비상용성을 나타내었다.

• Structural Engineering and Mechanics
• /
• 제8권1호
• /
• pp.103-118
• /
• 1999

The structural integrity of the reactor pressure vessel under pressurized thermal shock (PTS) is evaluated in this study. For given material properties and transient histories such as temperature and pressure, the stress distribution is found and stress intensity factors are obtained for a wide range of crack sizes. The stress intensity factors are compared with the fracture toughness to check if cracking is expected to occur during the transient. A round robin problem of the PTS during a small break loss of coolant transient has been analyzed as a part of the international comparative assessment study, and the evaluation results are discussed. The maximum allowable nil-ductility transition temperatures are determined for various crack sizes.

• 한국융합학회논문지
• /
• 제9권12호
• /
• pp.189-194
• /
• 2018

24인승 엘리베이터 비상 브레이크를 개발하기 위하여 구조해석을 수행하였다. 최근 대형건물의 빈번한 화재로 인하여 엘리베이터 비상 브레이크의 안전성이 부각되었다. 비상 브레이크의 안전성을 확인하기 위하여 SolidWorks를 활용하여 설계하고 유한요소해석 코드인 ANSYS를 활용하여 구조해석을 수행하여 총변형량, 변형률, 응력을 구하였으며 해석결과를 24인승 엘리베이터 비상브레이크를 제작 시 기초자료로 이용하였다.