• 전산구조공학
• /
• 제3권4호
• /
• pp.113-122
• /
• 1990

SFRC보의 휨 거동에 대한 이론적인 해석이 제시되었다. Critical region내의 곡률변화와 균열 양상이 고려되었으며 이를 위해 SFRC의 압축응력-변형도와 특히 SFRC의 인장 최대하중 후 응력-균열 열림관계(stress-crack opening relationship)로 표현된 인장 constitutive모델이 비선형 휨 해석에 이용되었다. 제시된 모델의 해석치는 실험치와 비교할 때 만족스러웠으며 이 모델을 이용, SFRC보의 휨 거동에 미치는 여러 영향들과 위험 단면(critical section)의 거동이 고찰되었다. 또한 단순 관찰과 통계적인 접근을 통해 SFRC보의 휨 거동에 큰 영향을 미치는 변수(parameters)들을 찾아내었다.

• Journal of Sport and Applied Science
• /
• 제8권1호
• /
• pp.1-10
• /
• 2024

The purpose of this study was to examine the structural relationship among organizational justice, athlete satisfaction, team commitment, and organizational citizenship behavior toward college athletes. To achieve this purpose, this study employed a convenience sampling method via a questionnaire dissemination. A total of 285 responses were collected from college athletes. Among those, 21 responses were excluded as they were not completed, leaving 264 usable data. The data was computed in SPSS 28.0 and AMOS 28.0, and analyzed with correlation analysis, reliability analysis, confirmatory factor analysis, and structural equation modeling analysis. Overall, organizational justice had a positive influence on athlete satisfaction, team commitment, and organizational citizenship behavior. Athlete satisfaction had a positive influence on team commitment and organizational citizenship behavior. However, there was no relationship between team commitment and organizational citizenship behavior. These findings provided empirical foundational data on the impact of organizational justice on psychological and behavioral outcomes and the overall efficiency and effectiveness of organizations, with a focus on college athletes who played a central role in the context of college sports setting.

• 가족자원경영과 정책
• /
• 제19권2호
• /
• pp.127-148
• /
• 2015

This study compared types of time and money attitudes by respondents' characteristics, and compared leisure consumption behavior and leisure satisfaction among different groups, which are classified by attitudes toward time and money. It also verified a structural model for the relationship of leisure satisfaction and the attitudes toward time and money, and investigated the moderating effects of leisure consumption behavior. Data were obtained from a questionnaire completed by 512 adult consumers. Using factor analyses and cluster analyses, this study classified the types of time and money attitudes. The time attitude was categorized according to four clusters: time-insensibility, future- oriented, present-oriented, and past-oriented. The money attitude was divided into four clusters: future safety, stinginess/anxiety, diversion, and power/prestige. The major findings of this study were as follows: First, the propensity of leisure consumption behavior to seek fashion and conspicuousness was higher for time-insensibility group than for the others. However, the propensity of rational consumption behavior for leisure was higher for the future-oriented group. The level of leisure satisfaction was the highest for the time-insensibility group. Second, the propensity of leisure consumption behavior to seek fashion and conspicuousness was higher for those who considered money as tools for diversion and power/prestige. The propensity of rational consumption behavior for leisure was higher for the future safety and stinginess/anxiety groups. The level of leisure satisfaction was significantly higher for the diversion group. Third, from the results of structural analyses, the time-insensibility attitude showed a positive effect on the leisure consumption behavior to seek fashion and conspicuousness. The future-oriented attitude had a positive effect on the propensity of rational consumption behavior for leisure. The money attitudes of diversion and power/prestige had positive impacts on the leisure consumption behavior to seek fashion and conspicuousness, although they had negative effects on the propensity of rational consumption behavior for leisure. The leisure consumption behavior to seek fashion and conspicuousness had a positive effect on leisure satisfaction, although the rational consumption behavior for leisure had a negative effect.

• Smart Structures and Systems
• /
• 제16권6호
• /
• pp.1069-1089
• /
• 2015

Arch bridges consist of some important components for structural behavior such as arches, sidewalls, filling materials and foundations. But, arches are the most important part for this type of bridges. For this reason, investigation of arch is come into prominence. In this paper, it is aimed to investigate the arch thickness effect on the structural behavior of masonry arch bridges. For this purpose, Goderni historical arch bridge which was located in Kulp town, Diyarbakir, Turkey and the bridge restoration process has still continued is selected as an application. The construction year of the bridge is not fully known, but the date is estimated to be the second half of the 19th century. The bridge has two arches with the 0.52 cm and 0.69 cm arch thickness, respectively. Finite element model of the bridge is constructed with ANSYS software to reflect the current situation using relievo drawings. Then the arch thickness is changed by increasing and decreasing respectively and finite element models are reconstructed. The structural responses of the bridge are obtained for all arch thickness under dead load and live load. Maximum displacements, maximum-minimum principal stresses and maximum-minimum elastic strains are given with detail using contours diagrams and compared with each other to determine the arch thickness effect. At the end of the study, it is seen that the maximum displacements, tensile stresses and strains have a decreasing trend, but compressive stress and strain have an increasing trend by the increasing of arch thickness.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.195-202
• /
• 1999

The kinematic and complicance characteristics of torsion beam axle is structurally related to the location and section profile of torsion beam and the span from body mounting point to wheel center. This paper presents the effect of section properties in torsion beam on the structural characteristics and roll behavior of suspension. The structural characteristics is on the maximum stress on the welding area of torsion beam and the roll behavior is on roll steer and roll-camber of suspension which are important for controllability and stability in cornering. Four factors are used for the section design of torsion beam, which are thickness , midline length, are inner radius, and sector half angle . Through the structural and quasi-static analysis made for six torsion beam axle models, it can be noticed that roll steer and the structural durability of suspension are closely related to warping constant and shear center in section properties of torsion beam.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.267-268
• /
• 2006

The cylinder cover stud of low-speed marine diesel engine is more than just a stud. It is a large structural element occasionally weighing over 200 kg used for assembling the combustion chamber components. Therefore, to understand the structural behavior of the stud and design it safely is quite important considering a catastrophic failure which can be arisen from an inadequate use of it. In this paper, the analysis results of the structural behavior of the stud is introduced. Strain measurement results compared with FE analysis results are summarized. The results showed that 1) the stud stress increased with engine operating load, 2) the maximum stress amplitude was about 10 MPa which is far smaller than the stud's fatigue strength of 61 MPa, 3) the stress ratio is higher than 0.9 and the stud's load factor is about 20 %, and 4) about 7 % of initial pressure tightening load was reduced while changing to a nut tightened condition.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.223-231
• /
• 2018

A numerical investigation of the impact of steel ductility on the strength and ductility of two-way corner and edge-supported concrete slabs containing low ductility welded wire fabric is presented. A finite element model was developed for the investigation and the results of a series of concurrent laboratory experiments were used to validate the numerical solution. A parametric investigation was conducted using the numerical model to investigate the various factors that influence the structural behavior at the strength limit state. Different values of steel uniform elongation and ultimate to yield strength ratios were considered. The results are presented and evaluated, with emphasis on the strength, ductility, and failure mode of the slabs. It was found that the ductility of the flexural reinforcement has a significant impact on the ultimate load behavior of two-way corner-supported slabs, particularly when the reinforcement was in the form of cold drawn welded wire fabric. However, the impact of the low ductility WWF has showed to be less prominent in structural slabs with higher levels of structural indeterminacy. The load-deflection curves of corner-supported slabs containing low ductility WWF are brittle, and the slabs have little ability to undergo plastic deformation at peak load.

• Steel and Composite Structures
• /
• 제20권1호
• /
• pp.21-41
• /
• 2016

Cold-formed steel structures are increasingly attractive due to their benefits of good mechanical performance and constructional advantages. However, this type of construction is still not fully exploited as a result of the acknowledged difficulties involved in forming construction-efficient and cost-effective connections. Furthermore, there is a lack of information on the structural behavior of the cold-formed steel connections. In this study, the research on various cold-formed steel connections was comprehensively reviewed from both fundamental and structural points of view, based on the available experimental and analytical data. It reveals that the current design codes and guidelines for cold-formed steel connections tend to focus more on the individual bearing capacity of the fasteners rather than the overall structural behavior of the connections. Significant future work remains to be conducted on the structural performance of cold-formed steel connection. In addition, extensive previous research has been carried out to propose and evaluate an economical and efficient connection system that is obtained from the conventional connecting techniques used in the hot-rolled industry. These connecting techniques may not be suitable, however, as they have been adopted from hot-rolled steel portal frames due to the thinness of the sheet in cold-formed steels. The review demonstrates that with the increasing demand for cold-formed steel constructions throughout the world, it is crucial to develop an efficient connection system that can be prefabricated and easily assembled on site.

• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.729-741
• /
• 1997

Cracked reinforced concrete in compression has been observed to exhibit lower strength and stiffness than uniaxially compressed concrete. The so-called compression softening effect responsible is thought to be related to the degree of transverse cracking and straining present. It significantly affects the strength, ductility and load-deformation response of a concrete element. A number of experimental investigations have been undertaken to determine the degree of softening that occurs, and the factors that affect it. At the same time, a number of diverse analytical models have been proposed by various this behavior. In this paper, the softened truss model thoery for low-rise structural shearwalls is employed using the principle of the stress and strain transformations. Using this theory the softening parameters for the concrete struts proposed by Hsu and Belarbi as well as by Vecchio and Collins are examined by 51 test shearwalls available in literature. It is found that the experimental shear strengths and ductilities of the walls under static loads are, in average, very close to the theoretical values; however, the experiment shear strengths and ductilities of the walls under dynamic loads with a low (0.2 Hz) frequency are generally less than the theoretical values.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.653-661
• /
• 2020

The paper presents a study regarding rubber compressibility behavior. The objective is to analyze the effect of compression degree of rubber on its mechanical properties and propose a new methodology based on reverse engineering to predict compressibility degree based on uniaxial stretching test and Finite Element Analysis (FEA). In general, rubbers are considered to be almost incompressible and Poisson's ratio is close to 0.5. Since this property is intimately related to the rubber packing density, little changes in Poisson's ratio can lead to significant changes regarding mechanical behavior. The deviatory hyperelastic constants were obtained through experimental data fitting by least squares method for the most relevant constitutive models implemented in commercial software Abaqus, such as: Neo-Hooke, Mooney-Rivlin, Ogden, Yeoh and Arruda-Boyce, whereas the hydrostatic part was determined through an optimization algorithm implemented in the Abaqus environment by Python scripting. The simulation results presented great influence of the Poisson's ratio in the rubber specimen mechanical behavior mainly for high strain levels. A conventional pure volumetric compression test was also carried out in order to compare the results obtained by the proposed methodology.