• Journal of the Korean Institute of Gas
• /
• v.15 no.3
• /
• pp.53-57
• /
• 2011

The present study has been carried out to analyze the flow characteristics of a heat recovery steam generator with the change of inlet flow conditions by using numerical flow analysis. The inlet of HRSG corresponds the outlet of gas turbine exit and the flow after gas turbine has strong swirl flow and turbulence. The inlet flow condition of HRSG should be included the exit flow characteristics of gas turbine. The present numerical analysis adopted the flow analysis result of gas turbine exit flow as a inlet flow condition of HRSG analysis. The computational flow analysis result of gas turbine exit shows that the maximum axial velocity appears near circular duct wall and the maximum turbulent kinetic energy and dissipation rate exist relatively higher gradient region of axial velocity. The comparison of flow analysis will be executed with change of inlet turbulent flow condition. The first case is using the inlet turbulent properties from the result of computational analysis of gas turbine exit flow, and the second case is using the assumed turbulent intensity with the magnitude proportional to the velocity magnitude and length scale. The computational results of flow characteristics for two cases show great difference especially in the velocity field and turbulent properties. The main conclusion of the present study is that the flow inlet condition of HRSG should be included the turbulent properties for the accurate computational result of flow analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.346-351
• /
• 2018

Metal three-dimensional (3D) printing technologies are mainly classified as powder bed fusion (PBF) and direct energy deposition (DED) methods according to the method of application of a laser beam to metallic powder. The DED method can be used to fabricate fine and hard 3D metallic structures by applying a strong laser beam to a thin layer of metallic powder. The PBF method involves slicing 3D graphics to be a certain height, laminating metal powders, and making a 3D structure using a laser. While the DED method has advantages such as laser cladding and metallic welding, it causes problems with low density when 3D shapes are created. The PBF method was introduced to address the structural density issues in the DED method and makes it easier to produce relatively dense 3D structures. In this paper, thin lines were produced by using PBF 3D printers with stainless-steel powder of roughly $30{\mu}m$ in diameter with a galvano scanner and fiber-transferred Nd:YAG laser beam. Experiments were carried out to find the optimal conditions for the width of a line depending on the processing times, laser power, spot size, and scan speed. The optimal conditions were two scanning processes in one line structure with a laser power of 30 W, spot size of $28.7{\mu}m$, and scan speed of 200 mm/s. With these conditions, a minimum width of about $85.3{\mu}m$ was obtained.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.92-100
• /
• 2018

Vortical systems are considered a main feature to sustain turbulence in a boundary layer through interaction. Such turbulent structures result in frictional drag and erosion or vibration in engineering applications. Research for controlling turbulent flow has been actively carried out, but in order to show the effect of vortices in a turbulent boundary layer, it is necessary to clarify the mechanism by which turbulent energy is transferred. For this purpose, it is convenient to demonstrate and capture phenomena in a laminar boundary layer. Therefore, in this study, the interactions of disturbed flow around a hemisphere on a flat plate in laminar flow were analyzed. In other words, a street of hairpin vortices was generated following a wake region formed after flow separation occurred over a hemisphere. Necklace vortices surrounding the hemisphere also appeared due to a strong adverse pressure gradient that brought high momentum fluid into the wake region thereby leading to an increase in the frequency of hairpin vortices. To mitigate the effect of these necklace vortices, local suction control was applied through a hole in front of the hemisphere. Flow visualization was recorded to qualitatively determine flow modifications, and hot-film measurements quantitatively supported conclusions on how much the power of the hairpin vortices was reduced by local wall suction.

• Tunnel and Underground Space
• /
• v.22 no.1
• /
• pp.69-76
• /
• 2012

Theoretical backgrounds on the experimental methods of explosive welding, explosive forming and shock consolidation of powders are introduced. Explosive welding experiments of titanium (Ti) and stainless steel (SUS 304) plate were carried out. It was revealed that a series of waves of metal jet are generated in the contact surface between both materials; and that the optimal collision velocity and collision angle is about 2,100~2,800 m/s and $15{\sim}20^{\circ}$, respectively. Also, explosive forming experiments of Al plate were performed and compared to a conventional press forming method. The results confirmed that the shock-loaded Al plate has a larger curvature deformation than those made using conventional press forming. For shock consolidation of powders, the propagation behaviors of a detonation wave and underwater shock wave generated by explosion of an explosive are investigated by means of numerical calculation. The results revealed that the generation and convergence of reflected waves occur at the wall and center position of water column, and also the peak pressure of the converged reflected waves was 20 GPa which exceeds the detonation pressure. As results from the consolidation experiments of metal/ceramic powders ($Fe_{11.2}La_2O_3Co_{0.7}Si_{1.1}$), shock-consolidated $Fe_{11.2}La_2O_3Co_{0.7}Si_{1.1}$ bulk without cracks was successfully obtained by adapting the suggested water container and strong bonding between powder particles was confirmed through microscopic observations.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.82-92
• /
• 2006

As beaches throughout Korea have suffered great losses of sand due to artificial developments and meteorological phenomena, particularly typhoons, it is necessary to monitor beaches that are prone to erosion continuously, establish and enforce a comprehensive plan to attack coastal erosion with the object of the long-term management. However, debates and temporary measures, not based on accurate coastal zone surveys and analyses, have been established up to now. Therefore, with Haeundae sand beach as a case study, we proposed methods to collect accurate spatial data of the coastline and the sand beach through GPS survey. And we detected and analyzed topographic changes resulting from Typhoon Nabi quantitatively and qualitatively, by using GIS technique. Results showed a mean elevation of 1.95 m, a total area of 53,441 $m^2$, and a total volume of 104,639 $m^3$ after Typhoon Nabi. Mean elevation rose 0.06 m between the pre- and the post-typhoon surveys by a protective shore wall. However, strong winds and north-northeast surges brought by the typhoon caused erosion of the area and the volume, by 3,096 $m^2$ and 2,320 $m^3$. Accurate spatial databases of coastal zones based on integrated GPS GIS techniques and quantitative and qualitative analyses of topographical changes will help Korea develop systematic and effective countermeasures against coastal erosion.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.136-145
• /
• 2007

Redevelopment about land that nature green tract of land and dilapidated city equipment including greenbelt make a strong resolution in city with change of town planning area according to growth of city is consisting. Formation of city of these phenomenon is old and personality of city changes rapidly, the speed becomes fast. Phenomenon that Busan moves to neighborhood area as convenience of traffic of industrial facilities that was on spearhead of economic growth move to outer wall of city and port facilities is deterioration, as becoming decline Tuesday industry form of city in the second industry the third phenomenon that alter by the 4th happen and case of residential area old residential area of inland area change for the worse of habit be and impulse to steal is augmented in the 1970, 80 is appearing. Hereupon the result inland area which analyzes the change with the use area compared to the area where it is coming in contact to the coast the diffusion of the residential area or the business park appears area, the factory back of nine cities acts Gangseo-gu or Gijang-gun of the industry area this with the fact that it changes.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.39-47
• /
• 2003

Rockbursts are mainly caused by a sudden release or the stored strain energy in the rock mass. They have been the major hazard in deep hard rock mines but rarely occur in tunnels. Due to the short history and limited information on rockbursts, the topic has rarely been studied in Korea. Some cases of rockbursts, however, have been reported during construction of a mountain tunnel for waterway. This study focuses on analyzing data on rockbursts obtained from a TBM (Tunnel Boring Machine) tunnel and suggests methods for a comprehensive understanding on rockbursts. From the analysis of the field data of rockbursts, it was found that most rockbursts mainly occurred at the section between the tunnel face and the TBM operating room, and the rock bursting phenomena lasted up to 20 days after excavation in certain areas. The data also show that the bursting spots are located all around the tunnel surface including the face, the wall, and the roof, The maximum size of bursting spots is usually less than 100cm. This study also suggests new scale systems of brittleness and uniaxial compressive strength to evaluate the possible tendency for a rockburst. These systems are scaled based on the scale system of strain energy density. In addition, with these scale systems, this research shows that there are potentially higher tendencies for rockbursts in this specific tunnel. Moreover this research suggests that properties of rock and rock mass, RMR (Rock Mass Rating) value, tunneling method, excavating speed, and depth of tunnel have a strong correlation with rockbursts.

• The Korean Journal of Cytopathology
• /
• v.1 no.2
• /
• pp.152-157
• /
• 1990

A 70-year-old female who was diagnosed as myxoid chondrosarcoma by fine needle aspiration of a pleural mass is described. She presented with left chest discomfort of 4 months' duration and aggravating dyspnea and chest pain for 2 months. Chest X-ray and CT scan revealed a large lobulated low density mass invading chest wall at the left pleural cavity and massive pleural fluid. Fine needle aspiration was done under the impression of mesothelioma or metastatic cancer. The aspirates from the mass were very cellular and composed of isolated or clustered forms of large plump cells. Abundant cytoplasm was blulsh opaque and the margin was rounded in the isolated cells, whereas clustered cells show ill-defined ceil borders and aggregating tendency. The nuclei were eccentric, round to ovoid, and had fine chromatin pattern and multiple small nucleoli. Cellular pleomorphism or mitotic figure was not definite. These findings were consistent with cytologic features of chondrosarcoma. Final diagnosis was confirmed as myxoid chondrosarcoma by mediastinoscopic biopsy and the tumor showed strong positivity for S-100 protein.

• Journal of the Korean earth science society
• /
• v.28 no.2
• /
• pp.202-213
• /
• 2007

The Odaesan earthquake $(M_L=4.8)$ occurred near Mt. Odae, Jinbu-Myon, Pyongchang-Gun, Kangwon Province on January 20, 2007. It has a shallow focal depth about 10 km. Its felt area covers most of the southern peninsula except some southern and western inland area. The maximum MM intensity was VI in the areas including Jinbu, Doam, Kangreung, Jumunjin, and Pyongchang. In these areas, there was a very strong shaking that caused several cracks on the walls of buildings and houses, slates falling off the roof, tiles being off the wall, things falling off the desk, and rock falling from the mountains. In order to get fault plane solutions, grid searches were performed by fitting distributions of P-wave first-motion polarities and SH/P amplitude ratios for each event. The results showed that the main shock represented right-lateral strike-slip sense and two aftershocks, reverse sense. It seems that the seismogenic fault may be the NNE-SSW trending Weoljeongsa fault near the epicenter based on the distribution of epicenters (foreshock, main shock, and aftershocks), damage area, and fault plane solution. The distribution of the epicenters indicates that the length of the subsurface rupture is estimated to be about 2 km.

• The Korean Journal of Mycology
• /
• v.26 no.4 s.87
• /
• pp.450-457
• /
• 1998

The cryparin of Cryphonectria parasitica belongs to a cell wall associated fungal hydrophobin. The cryparin, though it is encoded by a single copy gene, is known for the high expression during the liquid culture of C. parasitica, and it turns out that 22% of total mRNA was transcribed for cryparin at 48hr after the liquid culture. In addition, it is also known as one of down-regulated fungal proteins by the presence of double stranded RNA virus, Cryphonectria hypovirus 1. In previous studies (Kim et al., 1999), we have constructed a cryparin-null mutant by replacing the cryparin gene with hygromycin B resistance gene due to site directed homologous recombination. In order for the promoter analysis of cryparin which seems to be very strong as well as mycoviral specific, it is preferable to have a strain with only a target promoter replaced and a discernable target site for incoming vectors. However, the cryparin-null mutant revealed the presence of an additional copy of transforming vector except the one which replaced the cryparin gene. In addition, the cryparin-null mutant did not contain any markers for targeted integration of incoming vectors. This prompts us to design an experiment to obtain a strain for promoter analysis of cryparin gene. A different mating type strain EP6(Mata, $met^-$) was mated with the cryparin-null mutant ${\triangle}$Crp194-7(MatA, Crp${\triangle}$::hph) to make the progenies with only a single replacement vector and $met^-$ characteristic remained. Nutritional assay as well as Southern blot analysis revealed that the progeny, ${\triangle}$Crp194-a6, was the methionine auxotroph with a single replacing vector in genome. Northern blot analysis and PAGE showed that there was no cryparin produced in this bred strain either.