• Proceedings of the Korean Institute of Interior Design Conference
• /
• 한국실내디자인학회 2006년도 추계학술발표대회 논문집
• /
• pp.141-145
• /
• 2006

The development of information & communication technology in 21st century along with the mass media In 20th century, the influence of state-of-art culture in our society rapidly increased in these days. This state-of-art culture makes the world becomes single-channeled by network, and there is a big change not only in human life but also in concept and understand for art and space. The development of digital paradigm and media technology is exerting a strong influence on the Ubiquitous computing environment that is being drawn great interest. The ubiquitous is concerned as expansion of media art, and the interactive art which is part of media art has the similarity with the ubiquitous computing environment. In this study, the possibility of connection between the territory of ubiquitous environment which is recently focused and has strong interrelation feature, and the territory of interacting will be examined. Furthermore, possibility of new space design work through seeking the possibility of connection between two territories will be estimated.

• Computers and Concrete
• /
• 제21권3호
• /
• pp.299-310
• /
• 2018

When reinforced concrete structures are subjected to strong seismic forces, their beam-column connections are very susceptible to be damaged during the earthquake event. Consequently, structural designers try to fit an important quantity of steel reinforcement inside the connection, complicating its construction without a clear justification for this. The aim of this work is to evaluate -and demonstrate- numerically how the quantity and the array of the internal steel reinforcement influences on the nonlinear response of the RC beam-column connection. For this, two specimens (extracted from an experimental test of 12 RC beam-column connections reported in literature) were modeled in the Finite Element code FEAP considering different stirrup's arrays. The nonlinear response of the RC beam-column connection is evaluated taking into account the nonlinear thermodynamic behavior of each component: a damage model is used for concrete; a classical plasticity model is adopted for steel reinforcement; the steel-concrete bonding is considered perfect without degradation. At the end, the experimental responses obtained in the tests are compared to the numerical results, as well as the distribution of shear stresses and damage inside the concrete core of the beam-column connection, which are analyzed for a low and high state of confinement.

• International conference on construction engineering and project management
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.571-578
• /
• 2022

Modularization in a high-rise building is different from a small building, as it is exposed to more lateral forces like wind and earthquakes. The integrity, robustness, and overall stability of the modules and their performance is based on the joining techniques and strong structural systems. High lateral stiff construction structures like concrete shear walls and frames, braced steel frames, and steel moment frames are used for the stability of high-rise modular buildings. Similarly, high-rise stick-built buildings have concrete cores and perimeter frames for lateral load strength and stiffness. Methods for general steel-concrete connections are available in many works of literature. However, there are few modular-related papers describing this connection system in modular buildings. This paper aims to review the various research and practice adopted for steel-to-concrete connections in construction and compare the methods between stick-built buildings and modular buildings. The literature review shows that the practice of steel module-to-concrete core connection in high-rise modular buildings is like outrigger beams-to-concrete core connection in stick-built framed buildings. This paper concludes that further studies are needed in developing proper guidelines for a steel module-to-concrete core connection system in high-rise modular buildings.

• Journal of Korean Society of Steel Construction
• /
• 제16권5호통권72호
• /
• pp.641-652
• /
• 2004

The strong beam-to-column axis connections in steel structures have been studied for a long time to develop the strength and resistance of the connections. There have been very few studies, however, related to weak axis connections. Domestically, the bracket-type connection is commonly used in weak axis connections to elevate the efficiency of the constructions when the steel structures are constructed. The bracket-type connection detail has been applied moderately to weak axis connections. Therefore, the bracket-type connection in weak axis connections might be brittle and over-designed. The results of this study showed that the welding on the web of the column and the beam was unnecessary. In addition, this study confirmed that the new weak axis connection proposed in this study was superior to the previous connection in terms of strength and ductility.

• Journal of Korean Society of Steel Construction
• /
• 제14권4호
• /
• pp.557-566
• /
• 2002

This paper summarized the results of a full-scale cyclic seismic testing on four reduced beam section (RBS) steel moment connections. Specifically, these tests addressed a bolted web versus a welded web connection and strong versus medium panel zone (PZ) strength as key test variables. Specimens with medium PZ strength were designed to promote balanced energy dissipation from both PZ and RBS regions, in order to reduce the requirement for expensive doubler plates. Both strong and medium PZ specimens with welded web connection were able to provide sufficient connection rotation capacity required of special moment-resisting frames. On the other hand, specimens with bolted web connection performed poorly due to premature brittle fracture of the beam flange at the weld access hole. Unlike the case of web-welded specimens, specimens with cheaper bolted web connection could not transfer the actual plastic moment of the original (or unreduced) beam section to the column. No fracture occurred within the beam groove welds of any connection in this testing program. If fracture within the beam flange groove weld is avoided by using quality welding procedure as in this study, the fracture issue tends to move into the beam flange base metal at the weld access hole. Supporting analytical study was also conducted in order to understand the observed base metal fracture from the engineering mechanics perspective.

• Journal of Astronomy and Space Sciences
• /
• 제30권3호
• /
• pp.145-152
• /
• 2013

Rotation-powered pulsars are excellent laboratories for studying particle acceleration as well as fundamental physics of strong gravity, strong magnetic fields and relativity. Particle acceleration and high-energy emission from the polar caps is expected to occur in connection with electron-positron pair cascades. I will review acceleration and gamma-ray emission from the pulsar polar cap and associated slot gap. Predictions of these models can be tested with the data set on pulsars collected by the Large Area Telescope on the Fermi Gamma-Ray Telescope over the last four years, using both detailed light curve fitting, population synthesis and phase-resolved spectroscopy.

• Communications for Statistical Applications and Methods
• /
• 제7권1호
• /
• pp.291-296
• /
• 2000

Petrov(1996) examined the connection between general moment conditions and the applicability of the strong law lf large numbers to a sequence of pairwise independnt and identically distributed random variables. In this note wee generalize Theorem 1 of Petrov(1996) and also show that still holds under assumption of pairwise negative quadrant dependence(NQD).

• Journal of Industrial Technology
• /
• 제17권
• /
• pp.305-312
• /
• 1997

Shear connections in steel structures should satisfy dual criteria of shear strength and rotational flexibility and ductility. The connection should be strong enough to transfer the shear reaction of the beam, and should have sufficient rotational flexibility and ductility to rotate easily and supply the end rotation demand of the beam. This paper is concerned with the behavior of double-angle shear connections where the parameters are numbers of high strength bolts, bolt pitch, the length of angle leg, and connection method. An experimental investigation of shear connection was conducted by testing 12 beam-to-column joint specimens. Based on experimental and analytical study, the failure modes are developed and proposed design formulas.

• The Journal of Society for e-Business Studies
• /
• 제8권3호
• /
• pp.107-116
• /
• 2003

XML/EDI provides a way to connect legacy systems(ERPs) : When a XML/EDI system sends a message, the message contents come from the legacy system. Likewise, when a ERP receiving a message, important parts are stored in the legacy system. RosettaNet has become a strong tool to connect ERPs as RosettaNet has become a promising standard for XML/EDI. In this paper, a prototype using PIP 3A4(Order Management) of the RosettaNet is implemented to show how the standard could be used for the connection of ERPs.

• Journal of The Korean Astronomical Society
• /
• 제37권5호
• /
• pp.315-322
• /
• 2004

Several arguments have been presented in the literature to support the connection between radio halos and cluster mergers. The spectral index distributions of the halos in A665 and A2163 provide a new strong confirmation of this connection, i.e. of the fact that the cluster merger plays an important role in the energy supply to the radio halos. Features of the spectral index (flattening and patches) are indication of a complex shape of the radiating electron spectrum, and are therefore in support of electron reacceleration models. Regions of flatter spectrum are found to be related to the recent merger. In the undisturbed cluster regions, instead, the spectrum steepens with the distance from the cluster center. The plot of the integrated spectral index of a sample of halos versus the cluster temperature indicates that clusters at higher temperature tend to host halos with flatter spectra. This correlation provides further evidence of the connection between radio emission and cluster mergers.