• 한국정밀공학회지
• /
• 제14권6호
• /
• pp.15-21
• /
• 1997

This study is performed for investigating the effects of stripping and counter punching forces on shearing characteristics in fine blanking of T-shaped products, such as camber, burr-height and dimensional accuracy, etc by experiments. Conventional hydraulic press is used for experiments so that both the stripping force and counter punching force can be arbitrarily adjusted by another hydraulic unit connected to the fine blanking die. Specimens are selected as hot rolled steel sheet and carbon steel sheet commonly used in auto- mobile company. Based on the experimental results, both the dimensional accuracy and the burr height are not influenced by the stripping and counter punching forces, wherease the camber height representing dish- shaped deflection is much influenced by them, it can be seen through this study that the finely cut surface of T-shaped blank can be obtained even in conventional hydraulic press if additional equipments and specially designed die are employed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.598-602
• /
• 1996

This study is performed for investigating the effects of stripping and counter punching force on shearing characteristics in fine blanking, such as camber, burr-height and dimensional accuracy, etc by experiments. Conventional hydraulic press equipped with specially designed hydraulic unit is used for experiments so that both the stripping force and counter punching force are arbitrarily adjusted according to experimental conditions. Two kinds of materials, hot rolled steel sheet(1mm, 3mm) and pure aluminum(1mm, 3mm) are selected in order to examine the influence of strength and thickness of working materials in blanking of T-shaped products. Based on the experimental results of this study, it can be concluded that the finely cut surface of sheared blank can be obtained even in conventional hydraulic press if additional equipments and special dies are employed.

• 한국생산제조학회지
• /
• 제25권4호
• /
• pp.281-289
• /
• 2016

Agitation is a secondary process used to increase the PR stripping force on an ITO-glass surface; it is an efficient approach to stripping during production. It activates the stripper to chemically penetrate the PR layer and assists by breaking down the physical bonding forces at the surface. In this study, different stripping tests were conducted by varying the dipping time, the composition, the strip temperature, and the stripper concentration. Optimal PR strip conditions were estimated by using comparative visual inspection of stripped sample surfaces. The stripping process was affected by changes in the moving speeds and the sample positions. It was confirmed that the stripping capability improved at a dilute stripper ratio of 20-40% and a strip temperature of $30-40^{\circ}C$ and within 60 s of strip time.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.157-163
• /
• 1996

This paper is concered on the development of low-cost fine blanking die with two fluid chambers of which the pressure can be controlled by a hydraulic unit and its application to producting circular blanks in a conventional hydraulic press, not in a special triple-action press usually adopte in fine blanking operation. Four important working parameters affecting on the precision accuracy of products such as existence and position of Vee-ring, stripping force and counter punching force are primarily considered for experiments. Finite element analysis by suing ABAQUA software is approxi- mately made for blanking of circular specimen with a flat stripper plate and then compared with experimental measurements. The the theoretical prediction of camber height which represents deflection of a dish-shaped specimen after blanking seems to give a qualitatively good agreement. It is shown through experiments the the camber height decreases with decreasing stripping force and also with increasing counter punching force, but particularly depending on the latter much more than the former.

• 청정기술
• /
• 제15권2호
• /
• pp.69-74
• /
• 2009

초임계이산화탄소와 공용매의 혼합물을 사용하여 반도체 웨이퍼 기판으로부터 고농도이온주입 포토레지스트(HDIPR)를 제거하였다. 또한 고압 셀 내부에 초음파 장치를 부착하여 웨이퍼 표면에 물리적 힘을 제공함으로서 세정용액의 HDIPR에 대한 스트리핑 성능을 현저히 향상시키고, 제거 시간을 단축시켰다. 공용매의 종류 및 농도, 공정 온도, 압력 변화에 따른 HDIPR 스트리핑 특성을 조사하였으며, 웨이퍼 표면의 제거 전후의 상태 및 성분을 scanning electron microscopy 과 energy dispersive X-ray spectrometer를 이용하여 분석하였다. 10 w/w% 함량의 아세톤 공용매를 이용하여 공정압력 27.6 MPa과 온도 343 K 의 조건에서 3분의 초음파 처리시간을 거쳐 HDIPR을 완전히 제거할 수 있었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.261-266
• /
• 2001

Three innovative technologies to remediate trichloroethylene (TCE) in situ were (or currently are being) evaluated at a TCE-contaminated groundwater site at Edwards Air Force Base (AFB), California. The three technologies all make use of groundwater recirculation to obviate the need to pump contaminated groundwater to the surface fer treatment. The first technology, which implements aerobic cometabolic bioremediation to destroy TCE in situ, successfully reduced dissolved TCE concentrations from above 1 mg/L to 20-30 $\mu\textrm{g}$/L. The second technology, in-well vapor stripping (IWVS), is capable of treating dissolved TCE at concentrations in the tens to hundreds of mg/L. Finally, the third technology, bioenhanced in-well vapor stripping (BEHIVS): is a combination of the first two technologies, and is designed to reduce very high levels of TCE (tens to hundreds of mg/L) to concentrations that meet regulatory requirements 5 $\mu\textrm{g}$/L). Results of field evaluations of tile first two technologies are presented, and the design of the BEHIVS system. as well as model predictions of BEHIVS performance and the current status of the technology field evaluation. is discussed.

• 소성∙가공
• /
• 제23권1호
• /
• pp.23-28
• /
• 2014

The aspect ratio of a hole is defined as the ratio of the thickness to the diameter of the sheet metal. Most holes in the sheet metal industry are made by piercing. However, for thick sheets, which have an aspect ratio greater than 2, a machining process like drilling instead of piercing is usually used to make holes. In the current study, piercing, which is a shearing process, is evaluated to punch a hole with a high aspect ratio by using a newly designed die set-up. The piercing die was manufactured to prevent the punch from buckling and also to improve the alignment between the die components. An aluminum alloy sheet was selected for the experiments. The influence of several process parameters such as sheet thickness, clearance and stripping force were investigated. Experimentally, a hole with an aspect ratio of 5 was pierced. The resulting hole had a clean surface and the dimensional accuracy of pierced hole was considerably improved with decreasing clearance between punch and die. It is also shown that the larger penetration depth of the effective sheared surface can be achieved for high aspect ratio piercing relative to conventional piercing with a low aspect ratio.

• 한국응용과학기술학회지
• /
• 제37권5호
• /
• pp.1100-1105
• /
• 2020

본 연구는 기계화학적 활성화 된 스카치테이프가 금속 이온 수용액에서 유발하는 자발적 금속 나노입자 필름 형성의 구동력과 그 크기를 전기화학적 방법으로 분석했다. 은 필름이 형성된 테이프를 질산에 녹이고, 완충용액과 섞어 전기화학 측정용 샘플을 준비했다. 양극 벗김 전압전류법의 피크 신호를 통해, 은 입자의 자발적 환원에 소모된 전하량을 측정했다. 이를 검정 곡선에 대입하여, 환원된 은의 양을 구했다. 그 결과 은의 양이 선행 연구 대비 10⁶배 많은 점, 수용액에서 전하를 가진 이온들의 짧은 수명을 참고하여, 자발적 반응의 구동력을 라디칼로 결론 냈다.

• 천문학회보
• /
• 제42권1호
• /
• pp.29.3-29.3
• /
• 2017

We study the connection between the observed star formation rate-stellar mass (SFR-M) relation and the evolution of the stellar mass function (SMF) by means of a Subhalo Abundance Matching technique coupled to merger trees extracted from a N-body simulation. Our approach, which considers both galaxy mergers and stellar stripping, is to force the model to match the observed SMF at redshift z>2, and let it evolve down to the present time according to the observed (SFR-M) relation. In this study, we use two different sets of SMFs and two SFR-M relations: a simple power law and a relation with a mass-dependent slope. Our analysis shows that the evolution of the SMF is more consistent with a SFR-M relation with

• 청정기술
• /
• 제17권4호
• /
• pp.300-305
• /
• 2011

고농도 이온 주입되어 경화된 포토레지스트(HDI PR)를 효과적으로 제거하기 위해 초임계 이산화탄소와 여러 가지 공용매를 사용하였다. 공용매에 의한 용해 방식으로는 경화된 PR층이 완벽하게 제거되지 않기 때문에 고압셀에 초음파 발생 팁을 부착하여 웨이퍼 표면에 물리적인 힘을 제공함으로서 제거 성능을 높이고 제거시간을 단축할 수 있었다. 또한, HDI PR 제거 반응 후에 초임계 이산화탄소와 서로 섞이지 않는 헬륨 가스를 셀 내부에 주입하여 내용물을 배출함으로서, PR 제거 반응 잔여물을 빠른 시간에 제거할 수 있었다. 공용매의 종류 및 농도, 반응 온도, 압력 변화에 따른 HDI PR 제거 특성을 조사하였으며, 웨이퍼 표면의 반응 전 후의 상태 및 성분을 scanning electron microscopy과 energy dispersive X-ray spectrometer를 이용하여 분석하였다.