• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.532-537
• /
• 2005

In order to develop a tunable resonator which can be easily operated by DC bias and applied for microwave tunable filters and devices using ferroelectric thin or thick films, the non conductor backed-and conductor backed- coplanar stripline resonators have been designed and analyzed. They have been designed to be operated at 25 GHz which involve coplanar stripline input and output ports. The resonators have been simulated and analyzed using Ansoft HFSS. The research has been focused on the Quality factor of the coplanar stripline resonator. The conductor Q, box Q, and radiation Q of the resonators have been analyzed and calculated according to the substrate thickness & conductor width of the resonators. From these parameters, the loss factors of the coplanar stripline resonator have been investigated. The conducting Q of the coplanar stripline resonator has no relation with the thickness of dielectric substrate and increases as the conductor width increases. The box Q has no much relation with the thickness of substrate and the conductor width, which is above 2000. The radiation loss increases as the thickness of substrate and the conductor width increase. To decrease the radiation loss of the coplanar stripline resonator, a conductor backed coplanar stripline resonator has been proposed which has the unloaded Q of 170.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.123-126
• /
• 2002

A proposed multi-layer ceramic (MLC) chip type band-pass filter (BPF) is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coulped stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The passband and attenuation pole depend the coupling between resonators and coupling capacitance. The frequency characterics of the passband and attenuation pole are analysed with the variance of the coupling between resonators and coupling capacitance. An equivalent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the BPF is well acceptable for IMT-2000 application.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.740-743
• /
• 2003

A multi-layer ceramic (MLC) chip type band-pass filter (BPF) is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coulped stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The passband and attenuation pole depend on the coupling between resonators and coupling capacitance. The frequency characterics of the passband and attenuation pole are analyzed with the variation of the coupling between resonators and coupling capacitance. An equivanlent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the BPF is well acceptable for IMT-2000 application.

• 전기학회논문지
• /
• 제62권5호
• /
• pp.663-666
• /
• 2013

This paper demonstrates four different radio frequency (RF) resonators at 3 T magnetic resonance imaging (MRI) system. An approach based on microstrip transmission line to identical RF resonators except upper stripline structure is investigated. Electromagnetic simulation results are compared for RF resonators and discussed in detail at 3 T.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.265-268
• /
• 2003

In RF application of resonator, cylinerical and transmission line(TRL) type are used generally, especially in ceramic modules the latter is used widely, TRL type resonators are used in VCO and RF filters etc.. TRL type resonators are divided stripline and microstripline and their characteristics depend on that of conductor and dielectric materials. In this study, the effect of material properties on the stripline resonator is measured and analyzed. Besides, the optimum design rule of resonator is presented.

• 한국전자파학회논문지
• /
• 제16권1호
• /
• pp.78-83
• /
• 2005

본 논문에서는 적층 Inter-digital 공진기를 이용한 LTCC 대역통과 여파기의 등가회로를 제안하고, 2.4 GHz 대역의 여파기 설계에 적용하였다. 본 논문의 LTCC 적층 칩 대역통과 여파기는 평면상에서는 Comb-line 구조이고 단면상에서는 Inter-digital 구조로 구성된다. Comb-line 구조와 Inter-digital 구조의 평행 결합선로의 등가회로를 본 논문의 여파기에 적용하여 여파기 전체의 등가회로를 구성하였다. 이 등가회로는 공진기 사이의 결합 구조가 다중의 결합 구조를 갖는다. 이를 하나의 결합 구조로 통합하여 인버터를 이용한 대역통과 여파기의 설계방법을 적용하였다. 2.4 GHz 대역에서 3단의 대역통과 여파기를 설계, 제작하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.339-342
• /
• 1998

A high performance, high-dielectric stripline filter has been developed. The filter consists of planar resonators and its structure is made of high permittivity multilayer ceramic. The performance is distinctive with its attenuation pole. An equivalent lumped circuit is derived to explain the behavior of the attenuation pole quantitatively. A precise design procedure is also described.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.91-95
• /
• 2002

본 연구에서는 LTCC(Low temperature co-firing ceramic) 기술을 기반으로 한 적층 공정을 이용하여 최근 시장 수요가 증가하고 있는 2.4 GHz ISM(Industral science and medical) 대역의 대역통과 필터를 제작하였다. 또한 제안된 설계방식은 2.0$\times$l.2$\times$0.8㎣ 사이즈의 초소형 필터의 구현이 가능케 하였다. λ/4 공진기의 한쪽에 부하 캐패시터를 적절히 형성시켜 공진기의 길이를 짧게 하는 효과와 더불어 공진기의 Q값과 저지대역 감쇄특성을 향상시킬 수 있었다. 제안된 필터는 결합 스트립 공진기의 커플링 계수와 외부단자 Q값을 요구 사양에 맞게 최적화하여 이를 3차원 구조로 설계되었다. 제작된 대역통과 필터는 시뮬레이션을 통한 설계값과 매우 유사한 경향성을 보여주었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.751-755
• /
• 2003

In this paper, We proposed compact multi-layer LTCC (Low Temperature Cofired Ceramic) bandpass filter for Bluetooth module. A ${\lambda}/4$ coupled stripline resonators are designed, which composed of coupled strip-line section and loading capacitance. This resonator with a loading capacitor has slow-wave characteristics. Due to the slow-wave effect of the proposed resonator, it is possible to design and fabricate a compact bandpass filter with a wide upper stop band. Attenuation poles in the lower stop band are achieved using controlling of electro-magnetic coupling between resonators. Using multi-layer LTCC technology, we designed and fabricated band pass filter with a finite attenuation pole and wide upper stopband. The overall size of the filter is $1.2{\times}2.0{\times}1.0mm^3$.

• 한국세라믹학회지
• /
• 제40권10호
• /
• pp.961-966
• /
• 2003

BiN $b_{0.975}$S $b_{0.025}$ $O_4$저온 동시 소결 세라믹 후막 및 적층 세라믹(Multi-Layer Ceramic, MLC) 공정 기술을 이용한 소형 마이크로파 필터를 설계 및 제작하였다. MLC 칩 대역 통과 필터(BPF)는 소형화와 낮은 가격이라는 장점을 가지고 있다. 제안된 필터는 stripline 공진기와 결합 캐패시터로 구성되며, IMT-2000용 단말기의 수신단 통과 대역에 적합하며 통과 대역 아래쪽 저지 대역에 감쇠극이 형성되도록 설계하였다. 상용 마이크로파 회로 및 구조 설계 tool를 이용하여 제안된 MLC칩 대역 통과 필터의 공진기 전자기적 결합량 변화 및 결합 캐패시턴스에 따른 필터의 주파수 특성, 특히 감쇠극의 위치 변화에 대해 살펴보았다. 제작된 MLC 칩 BPF의 주파수 특성은 시뮬레이션 결과와 매우 일치하였다.