• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.482-492
• /
• 1998

With the purpose of developing a objective fitness evaluation system for knits, the basic bodice pattern for knit was drafted and the suitability of the altered pattern was evaluated. For each of nine different knits, six sleeveless shirts were made with patterns that were altered by different pattern alteration rate: 0%, 30%, 40%, 50%, 60%, or 70% of the stretch rate of the knit. The panel that was composed of 25 clothing specialists evaluated the fitness of the garments. The distance from the dress form landmark to the garment landmark was measured from each experimental garment. And the results of garment fitness evaluation and the measurement of distance from the dress form landmark to garment landmark were compared. The results of this study are as follows: There was high correlation(r$\geq$0.9) between the evaluation of the panel about the garment fit and the landmarks distance. The stretch rate of knits affected the evaluation of the garment fit. The stretch rate in course of knits affected on the garment fit at crosswise direction. The suitable pattern alteration rate was lower than 30% for the knits with high stretch rate in course. It was concluded that in order to get the appropriate knit bodice pattern length, the front bodice pattern must be less shorten than the back bodice pattern. The alteration rate at hip line must be lower than for waist or bust line.

• PNF and Movement
• /
• v.1 no.1
• /
• pp.19-25
• /
• 2003

Objectives: The purpose of this article is to summarize the effect of stretch stimulus on muscle contraction facilitation. Methods : Some studies of the stretch reflex. ${\gamma}-motor$ system, and the effect of stretch stimulus on muscle activation were reviewed. Results : To facilitate muscle contraction, before the movement is started, the prime mover is in stretched position. The patient must be instructed to occur voluntary muscle contraction after quick stretching. It elicits the functional stretch reflex to produce a more powerful and functional contraction. The intensity of muscle contraction depends on two ways. One is firing rate of ${\alpha}-motor$ neuron by sensory information from the periphery induced in stretched position and stretch reflex. The other is excitation level of the cortical motor area and the corresponding motor neurons. Conclusions: To activate central nervous system and to increase firing rate of ${\alpha}-motor$ neuron. the therapist should apply quick stretch for the patient with stretched position and the patient should make voluntary muscle contraction.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.111-114
• /
• 2005

In this the study, polyester/cotton(P/C) blended fabrics with fine denier were developed to get the light weight compared with the traditional P/C blended fabrics. Moreover, the width of the fabrics was extended by the tenter during the final heat treatment to get the lower fabric density and lighter weight. Then, the physical properties of these fabrics were analysed. The results were as the follows: The developed fabrics had 22.6-31.6% lighter weight than the traditional fabrics with the same fabric width. The weight of fabric decreased drastically with the fabrics width down to 67.1 $g/m^2$. The fabric density for the warp direction decreased with the fabric width. The tenacity and the elongation of the developed fabrics was little lower than that of the traditional fabrics. The air permeability of the developed fabrics increased with that of the traditional fabrics. The stretch rate of the developed fabrics decreased with increasing the fabric width. Residual stretch rate of the developed fabrics was more stable than that of the traditional fabrics. Residual stretch rate of the developed fabrics increased with the fabric width, but the highest value was less than 5% which is quit stable.

• The Journal of Korean Physical Therapy
• /
• v.27 no.5
• /
• pp.299-303
• /
• 2015

Purpose: The objective of this study was to examine the changes in muscle activity on the anterior deltoid muscle depending on the stretch rate of kinesio tape when applying kinesio tape in healthy adult subjects. Methods: This study was a single-blind randomized controlled trial, including 22 healthy participants (male 15, female 7) with no pathology or past history of shoulder who participated voluntarily. Participants applied a different stretch rate of the kinesio tape, and the functional activity was tested. The stretch rate of kinesio tape was 0%, 10%, and 20%. Subjects lifted a weight (5% of their body weight) to their shoulder height. Subjects lifted a weight up to an angle of 90 degrees in the sagittal plane, and muscle activities (biceps brachii, anterior deltoid, middle deltoid, upper trapezius) were assessed using EMG (electromyography). Analysis of muscle activity was divided into two parts (lift weight and keep holding). The EMG activity of each muscle was normalized to the value of reference voluntary contraction (%RVC) and explored using repeated ANOVA. Results: There were no significant differences in muscle activity depending on the ratio of tape stretch when lifting a weight (p>0.05). There were no significant differences in muscle activity depending on the ratio of tape stretch when holding a weight (p>0.05). Conclusion: According to the results of this study, in the case of applying kinesio taping therapy for healthy people, it was found that the stretch rate of the tape does not have an effect on muscle activity.

• The Research Journal of the Costume Culture
• /
• v.13 no.1
• /
• pp.47-59
• /
• 2005

This study aims to measure stretch rate of standard weight in the $2{\times}1$ rib stitch and $2{\times}2$ rib stitch, and to apply features of rib stitch to the knit pattern. The reviewer examined the sample knit for test with 100% wool, $2/48's{\times}2$, 12 gauge, and then made knit patterns and sample clothes for test considering stretch rate of standard weight of 10gf, 15gf, 20gf, 25gf based on the results from the former test, and finally estimated the try-outs for sample clothes. This study came out with the following results: From the functional estimate of knit patterns made by standard stretch rate of each stitch, the 20gf weight sample clothes of $2{\times}1$ and $2{\times}2$ rib stitchs were in high estimate. For the bust, B/4~ -4.6cm knit pattern was made of $2{\times}1$ rib stitch, B/4~5.3cm of $2{\times}2$ rib stitch. In conclusion, because $2{\times}1$ and $2{\times}2$ rib stitchs has the much higher stretch rate in the direction of the course than $0{\times}0$ ad $1{\times}1$ rib stitchs, high stretch rate of standard weight should be applied to the case of making knit wear. It is expected that this will lead stable sizing and measurement system when used in making knit patterns, and satisfy knit wearers' various needs.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.769-780
• /
• 2004

This study aims to measure stretch rate of standard weight in the direction of the knit stitch course by the difference in the way of weaving rib stitch, the most elastic stitch of all the knit stitches and to apply features of rib stitch to the knit pattern. The reviewer examined the sample knit for test with 100% wool, 2/48's 2, 12 gauge, and then made knit patterns and sample clothes for test considering stretch rate of standard weight of 10gf, l5gf, 20gf, 25gf based on the results from the former test, and finally estimated the try-outs for sample clothes. This study came out with the following results. From the functional estimate of knit patterns made by standard stretch rate of each stitch, the l5gf weight sample clothes of 0×0 and 1×1 rib stitches looking similar to plain stitch. For the bust, B/4-1.0㎝ knit pattern was made of 0×0 stitch, B/4-1.2㎝ of 1×1 rib stitch. In conclusion, because rib stitch has the much higher stretch rate in the direction of the course than other stitches, low stretch rate of standard weight should be applied to the case of making knit wear. It is expected that this will lead stable sizing and measurement system when used in making knit patterns, and satisfy knit wearers' various needs.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.129-137
• /
• 1994

A rigid-viscoplastic finite element method has been used for modeling superplastic stretch/blow process design to improve thickness distribution. Punch velocity-time relationship of the stretch forming and pressure-time cycle of the blow forming for a given strain rate are calculated. A superplastic material is assumed to be isotropic and a plane-strain line element based on membrane approximation is employed for the formulation. The effects of the width, corner radius and height of the punch during stretch forming are examined for the final thickness distribution, and the process design to improve thickness distribution can be established.

• Journal of Fashion Business
• /
• v.25 no.5
• /
• pp.99-113
• /
• 2021

This study aimed to produce sensors for measuring thigh motor skills. A textile stretch sensor was manufactured using a CNT(Carbon Nano Tube) 0.1 wt% water SWCNT(Single-Walled Carbon Nano Tube) solution, and different designs were applied to increase the sensitivity of the sensor, and different GF(Gauge Factor) values were compared using UTM devices. The same design was applied to fabrics and weaves to observe changes in performance according to fibrous tissue, and the suitability of sensors was determined based on tensile strength, elongation, and the elongation recovery rate. Sensitivity was found to vary depending upon the design. Thus the manufactured sensor was attached to a pair of fitness pants as a prototype, divided into lunge position and squat position testing, and the stretch sensor was used to measure thigh movements. It was shown that stretch sensors used to measure thigh motor skills should have light and flexible features and that elongation recovery rates and tensile strength should be considered together. The manufactured stretch sensor may be applicable to various sports fields that use lower limb muscles, wearable healthcare products, and medical products for measuring athletic ability.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2001.06a
• /
• pp.17-17
• /
• 2001

It is well known that myocardial stretch causes changes in electrical signalling and contractility of the heart. For example, mechanical stretch depolarises the membrane potential of cardiac cells and alters the shape of action potentials. As a result, these effects either accelerate the frequency of heart rate or induce arrhythmias of the heart.(omitted)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.125-131
• /
• 1997

The extinction of premixed flames under the influence of stretch is studied numerically. A wide range of fuel (hydrogen, ethylene, acetylene, methane, propane and methanol) and air mixtures are established in an opposed jet and their flame properties such as flame speed, flame thickness, thermal diffusivity, and stretch rate at extinction are computed. Computations are made using several chemical kinetic mechanism (Smooke, Kee et al. and Peters). The major result is that, in contrast to the various previous claims of extinction Karlovitz number varying over three orders of magnitude, it is found to be constant around two for all of the mixtures tested. That is, premixed flames are extinguished when the physical flow time decreases (due to increased stretch rate) to the point where it approximately equals the chemical reaction time. Here the relevant chemical reaction time is not the one computed using the one-dimensional flame properties as originally suggested in the formulation of Karlovitz number, but rather it is the one obtained using the stretched flame properties which fully reflect the effect of straining on the flame structure.