• Journal of Biosystems Engineering
• /
• v.27 no.4
• /
• pp.335-340
• /
• 2002

Recently, in Korea, round bale wrapping silage made by fresh rice straw are partially utilized. The colors of stretch film using far wrapping the fresh rice straw round bale are white, green and black. The light transmittance of green and white color stretch film was not founded the difference. However, the light transmittance of black color stretch film was largely difference of two stretch films. This study was carried out to measure qualities of fresh rice straw wrapping silage by softening processing of fresh rice straw and colors effects of wrapping stretch film. The analyzed factors were the light transmittance of stretch film, variation of the temperature in fresh rice straw round bale and qualities of the silage in crude protein, ADF, NDF, organic acid, etc. It was difficult to find in this study the colors effects of stretch film on silage qualities by the silage wrapping. But, when make fresh rice straw wrapping silage, wrapping silage fermentation effect goes well more if handle softening the fresh rice straw.

• Journal of Animal Environmental Science
• /
• v.5 no.2
• /
• pp.79-86
• /
• 1999

Recently more dairy farmers are interested in the utilization of stretch film for wrapping silage material. Most of stretch film are imported from abroad and one domestic product was developed, but its quality has not yet been tested. Therefore this study was executed to offer basic data on this material to the farmers. Measured items were tensile load, extension ratio, and tear propagation strength of stretch films. Comparisons were made among the white color of domestic product(Kw), and white(Fw), black (Fb) and green color(Fg) of foreign products. The result were summarized as follows: 1. Tensile loads of lengthwise direction in stretch films were 557.4, 377.4, 282.6 and 398.4kgf/$\textrm{cm}^2$ in Kw, Fw, Fb and Fg, respectively, and tensile loads of width direction were 415.9, 418.1, 360.2 and 433.0kgf/$\textrm{cm}^2$ in Kw, Fw, Fb and Fg, respectively. 2. Extension ratios of lengthwise direction were 650, 462.5, 512.5% and 537.5% in Kw, Fw, Fb and Fg, respectively, Extension ratios of width direction were 930, 962.5, 950 and 1,000% in Kw, Fw, Fb and Fg, respectively. 3 Tear propagation strength of lengthwise direction 187.9, 148.9, 157.3 and 142.8kgf/cm, and tear propagation strength of width direction were 141.4, 129.8, 140.4 and 106.6kgf/cm in Kw, Fw, Fb and Fg, respectively. 4. In the light transmittance, there was no difference between white and green color stretch film, but it was very low in black one. Therefore, it is thought that research on quality of roll bale silage treated with each stretch film would be needed.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.1
• /
• pp.35-42
• /
• 2016

Until recently, almost all ETFE film structures that have been erected is the cushion type because there are problems at lower allowable strength under elastic range and viscosity behaviour such as creep and relaxation of ETFE films under long-term stresses. But the number of tension type structures is currently increasing. This paper proposes the stretch fabrication of ETFE film to verify the applicability of ETFE films to tensile membrane structures. First of all, to investigate the possibility of application on tensile membrane structures, the stretch fabrication test is carried out, and it is verified that it is possible to increase the yield strength of the film membrane structures. After simulating the experiment also carries out an analytical investigation, and the effectiveness of the elasto-plastic analysis considering the viscous behavior of the film is investigated. Finally, post-aging tension measurement is conducted at the experimental facilities, and the viscosity behavior resulting from relaxation is investigated with respect to tensile membrane structures.

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.3
• /
• pp.85-92
• /
• 2014

Most of the structural forms in which ETFE film is used are the cushion(pneumatic membrane structures) and tension type(tensile membrane structures), which have been generally accepted to be the most efficient forms. Tensile membrane structures are pulled outward from the exterior to introduce initial stress. And such structures offer the advantage of a natural shape formed by tensile stress and eliminate the need for blast air. Recently, the number of tension type structures is increasing. However, there are problems of creep and relaxation of ETFE films under long-term stresses. In this paper, the stretch fabrication method is proposed for stretching the film into the plastic region during initial tensioning as a way to increase its strength. And its effectiveness is confirmed by investigating experimental and analytical test using ETFE films.

• The monthly packaging world
• /
• s.202
• /
• pp.96-101
• /
• 2010

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1171-1173
• /
• 1995

Polyimide thin films were fabricated through the vapor deposition polymerization method, and the structure and capacitance characteristics of them were investigated in detail. It was found that the chemical structure and uniformity of the film could be stabilized with curing. The peaks of $720cm^{-l},\;1380cm^{-1}\;and\;1780cm^{-1}$ show C=O stretch mode, C-N stretch mode and carbonyl stretch mode, and those of polyimide which cured over $300^{\circ}C$ were fixed. It was found that capacitance was changed in proportion to temperature.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.02a
• /
• pp.135-140
• /
• 2000

• Journal of Biosystems Engineering
• /
• v.42 no.3
• /
• pp.136-146
• /
• 2017

Purpose: This paper presents an appropriate wrapping method by analyzing the pressure distribution applied to a bale surface, along with the change in pressure according to an increase in the number of film layers in rice straw bales, which account for 74% of the total bulky feed supply in Korea. Methods: A model with the shape of an actual bale was fabricated to analyze the distribution of surface pressure in bale wrapping, and the pressure was measured. Experiments were conducted to analyze the pressure using eight different layer numbers (2, 4, 6, 8 10, 12, 14, and 16 layers) at five wrapping speeds (27, 29, 31, 33, and 35 rpm). Results: The maximum pressure applied to a circular bale by the film occurred at the center of the end of the bale, whereas the minimum pressure occurred at the center of the bale side. An extreme value ratio between the minimum and maximum pressures was distributed as 8.5-56.6%, which was improved with an increase in rotation speed. The an uneven pressure distribution occurred because the number of film overlaps was 8.24-times greater at the center of the bale's end than at the center of the ba le side. At a level 5 rotation speed, the minimum pressure was $P_{LV5-M1}=0.0625{\sigma}^2+36.173{\sigma}-36.753$ ($R^2=0.9845$) at $M_1$, and the maximum pressure was $P_{LV5-M6}=5.5552{\sigma}^2+41.05{\sigma}-39.071$ at $M_2$, revealing a correlation of $R^2=0.9983$. Conclusions: To replace four layers with six layers, 2-4 layers were added only to the side of the bale, and the minimum pressure at $M_1$ was then improved from that at four layers to that at six layers, and the amount of film consumed for 4-6 layers was reduced by 84.6%.

• Elastomers and Composites
• /
• v.57 no.3
• /
• pp.114-120
• /
• 2022

The tensile properties of the extruded PC film were measured in the extrusion direction and perpendicular to the extrusion direction. The measured properties were the elastic modulus and Poisson's ratio at the glass transition temperature of PC. The measured orthotropic properties of the film were used for the computer simulation of vacuum forming. In this simulation, three mold shapes were tested: dome, trapezoid, and cubic, and the vacuum was applied between the mold surface and the heated film. The stress, strain, thickness, and stretch ratio distributions of the film in different mold shapes were observed and compared. The thermoforming simulation method used in this study and the obtained results, considering the determined orthotropic properties, can be applied to the thermoforming of various three-dimensional shapes.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.193-197
• /
• 2010

Stretch wrapping processes that are used to the packaging process had a serious problem of high price and treatment of used wraps. On the other hand, slip-resistant adhesive provides the advantage of simple process, low cost, and free from after-use treatment. In this research, adhesion deterioration of aqueous slip-resistant adhesive adhered to polyethylene film under the moisture condition using aqueous slip-resistant adhesive was observed by the Peel Test. Improvement of adhesive property under the moisturizing condition could be obtained by the selection of appropriate additives. As a result, introduction of maltodextrin reduced the deterioration of slip-resistant adhesion owing to the improved moisture resistance and introduction amount of 10 wt% of maltodextrin showed optimal performance.