• Journal of Preventive Medicine and Public Health
• /
• 제41권1호
• /
• pp.39-44
• /
• 2008

Objectives : This study was conducted to investigate the associations of non alcoholic fatty liver with metabolic syndrome and the serum carotenoids. Methods : This study was conducted in a general hospital in South Korea from November, 2004 to August, 2005. The study subjects were 350 sampled persons who were aged from 40 years and older (males : 180, females : 170). They were grouped into the normal, mild and severe groups according to fat accumulation in their livers, as determined by ultrasonography. We analyzed the association between non alcoholic fatty liver and metabolic syndrome by multiple logistic regression analysis and we analyzed the association between non alcoholic fatty liver and the serum carotenoids by a general linear model(ANCOVA). Results : After adjustment for the effect of potential covariates, the prevalence of metabolic syndrome was associated with fat accumulation in the liver (p trend <0.001). If the odds ratio of normal group is 1.00, then that of the mild group is 2.80 (95% C.I=1.17-6.71) and that of the severe group is 7.29 (95% C.I=2.76-19.30). The prevalence of metabolic alterations fitting the criteria of metabolic syndrome, according to the class of fat accumulation in the liver, was significantly increased, except for criteria of high blood pressure, a large waist circumference and low HDL (high density lipoprotein) cholesterol level (p trend <0.001). The level of serum ${\beta}$-carotene was decreased according to the class of fat accumulation in the liver (p trend=0.036), but the levels of serum ${\alpha}$-carotene, lycopene, ${\beta}$-cryptoxanthin and lutein were not decreased. Conclusions : This study shows that non alcoholic fatty liver was associated with metabolic syndrome and with the serum ${\beta}$-carotene level.

• Applied Chemistry for Engineering
• /
• 제26권6호
• /
• pp.674-680
• /
• 2015

A solvent-soluble polyimide (PI) polymeric binder was synthesized by a two-step reaction for silicon (Si) anodes for lithium-ion batteries. Polyamic acid was first prepared through ring opening between two monomers, bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BCDA) and 4,4-oxydianiline (ODA), followed by condensation reaction. Using the synthesized PI polymeric binder (molecular weight = ~10,945), the coating slurry was then prepared and Si anode was fabricated. For the control system, Si anode based on polyvinylidene fluoride (PVDF, molecular weight = ~350,000) having the same constituent ratio was prepared. During precycling, PI polymeric binder revealed much improved discharge capacity ($2,167mAh\;g^{-1}$) compared to that of using PVDF polymeric binder ($1,740mAh\;g^{-1}$), while the Coulombic efficiency of two systems were similar. PI polymeric binder improved the cycle retention ability during cycles compared to that of using PVDF, which is attributed to an improved adhesion property inside Si anode diminishing the dimensional stress during Si volume changes. The adhesion property of each polymeric binder in Si anode was confirmed by surface and interfacial cutting analysis system (SAICAS) (Si anode based on PI polymeric binder = $0.217kN\;m^{-1}$ and Si anode based on PVDF polymeric binder = $0.185kN\;m^{-1}$).

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제17권4호
• /
• pp.429-440
• /
• 2015

In this study, model test equipment was developed to evaluate the hydraulic pressure reduction in appling the drainage shield tunnel and the model test for hydraulic pressure difference was performed in case of drainage and undrained conditions. In the result of model test, increase ratio of pore water pressure was decreased in drainage condition and total stress in drainage condition was smaller than that in undrained condition, so the hydraulic pressure was reduced by the groundwater inflow into the model tunnel. In the result of field instrumentation, the hydraulic pressure in the back ground of shield tunnel was small by 11~22% in comparison with the calculated hydraulic pressure ($r_w{\cdot}H$) in same groundwater level. In the result of model test and field instrumentation, it was appeared in drainage and undrained conditions that the difference between the theoretical hydraulic pressure and the real hydraulic pressure. It shows that it is possible to apply the reduced hydraulic pressure in applying the drainage shield tunnel and to reduce the segment section due to hydraulic pressure reduction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제22권4호
• /
• pp.435-450
• /
• 2020

The divergence section of a double-deck tunnel can be divided into a 'widening pre-divergence section', a large cross-section with a cap shape and a 'post-divergence section' where the separation between the main and the branch tunnel is made. Since the cross-section of the widening pre-divergence section is considerably larger than that of the post-divergence section, the influence of excavation due to the different sizes and shapes in the cross-section should be considered in the examination of the tunnel stability. In this study, the effect of the preceding excavation, that is the excavation of the widening pre-divergence section, on excavation stability of the post-divergence section was examined by varying the excavation methods and bench lengths through 3D finite element analysis. The results showed that although the effects of the excavation methods and the bench lengths are not significant on the variation of principal stresses, the preceding excavation causes a relatively large variation on the stresses which may have an impact on the stability of the post-divergence section from the comparison of Stress-Strength Ratio (SSR) between the cases with and without the consideration of the preceding excavation effect by 2D finite element analysis.

• Anxiety and mood
• /
• 제5권1호
• /
• pp.29-35
• /
• 2009

Background : In spite of the worldwide relevance of obsessive-compulsive disorder Ed-highlight : Unclear. Perhaps consider changing word choice. (OCD), there are considerable differences in prevalence, sex ratio, comorbidity patterns, and sociodemographic correlates. Data on subclinical OCD have been sparse to date. Methods : Data stemmed from the Korea Epidemiologic Catchment Area (KECA) study which had been carried out from April to December 2001. Korean versions of DSM-IV adapted Composite International Diagnostic Interview were administered to a representative sample of 6275 persons aged 18-64 living in the community. DSM-IV based criteria for subclinical OCD were applied. Results : The lifetime prevalence rates for OCD and subclinical OCD were 0.8% and 6.6%, respectively. In both OCD and subclinical OCD, the rates for males and females were not statistically different. OCD was demonstrated to be associated with depressive disorder, bipolar disorder, social phobia, generalized anxiety disorder, and alcohol and nicotine dependence. Additionally, subclinical OCD was associated with posttraumatic stress and somatoform disorders. Comorbidity rates in subclinical OCD were lower than those in OCD. Conclusions : The lifetime prevalence rate for OCD was less than 1% in the Korean general population. Age distribution and comorbidity patterns suggest that subclinical OCD represents a broad and heterogeneous syndrome and not simply a milder form of OCD.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• 제6권1호
• /
• pp.45-50
• /
• 2012

Thoracolumbar orthosis has been used for the rehabilitation of the patients with senile kyphosis. Recently, a number of different thoracolumbar orthosis designs have been introduced but its biomechanical effectiveness still remain unknown. In this study, we compared the pressure distribution on the surface of the trunk and stresses on the orthosis in relation to changes in connecting frame designs (Type 1, one-connecting frame type; Type 2, two-connecting frame type; Type 3, all-in-one type) using finite element (FE) models under different motions of the trunk. The results showed that Type 3 distributed the pressure on the trunk most evenly followed by Type 2 and Type 1 and the difference between Type 1 and Type 2 was negligible. ROM was limited most effectively by Type 3 ($8.5{\sim}9.4^{\circ}$), followed by Type 2 ($11.3{\sim}13.9^{\circ}$) and Type 1 ($12.1{\sim}15.4^{\circ}$). The ratio between the peak von Mises stress and yield strength of each material remained less than 20% regardless of orthosis type indicating low likelihood of component failure. In conclusion, our study found that all-in-one type of orthosis was the most effective design for the conservative treatment of spinal deformity in terms of function and comfort.

• Journal of Animal Environmental Science
• /
• 제18권3호
• /
• pp.173-182
• /
• 2012

The study was carried out to investigate the effect of lighting regimes on performance and meat quality of broiler. A total of 912 chicks was divided into 2 groups with male (3 replications/group, 34 heads/replication) and female (3 replications/group, 42 heads/replication). Treatments were control (C, natural lighting), T1 treatment (24L), and T2 treatment (1~2d, 24L; 2~4d, 23L+1D; 4~16d, 16L+8D; 16~21d, 18L+6D; 21~42d, 23L+1D) by lighting regimes. There was no significantly different on body weight, body weight gain, feed intake, and feed conversion ratio of male and female of broilers among treatments. There was no significantly different on cooking loss and water hold capacity of all broiler's meats among treatments. Share force of lighting regimes was higher compared to control (P<0.05). There was no significantly different on common ingredients (moisture, crude protein, crude fat, and ash) of broiler's meat. Finally, lighting regimes may decrease the stress as well as improve the growth performance and meat quality of broilers

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• 제27권2호
• /
• pp.102-107
• /
• 2016

Background and Objectives : Vocal polyps are caused by inflammation induced by stress or irritation. Many patients with vocal polyps complain voice discomfort. For vocal polyps, surgery such as laryngeal microsurgery has been the mainstay of management. We analyzed the clinical features of vocal polyps, and how the size and location of vocal polyps affect the outcomes of surgery. Methods : We retrospectively reviewed 42 patients from March 2014 to December 2015, who were diagnosed as unilateral single vocal polyp. When we operated on a vocal polyp with laryngeal microscopy, we measured their size and location. The quality of voice was evaluated by GRABS scale, jitter, shimmer, NHR (noise to harmonic ratio), MPT (maximum phonation time), and VHI (voice handicap index) before operation and 4 weeks after operation. Results : When we divided the patients into large-sized vocal polyp group (the longest length >3 mm) and small-sized vocal polyp group (the longest length ${\leq}3mm$), all parameter differences tend to be greater at large sized vocal polyp. However, these differences were not statistically significant (p>0.05). When we divided into two groups depending on the volume of vocal polyp, no distinct tendency was found. When we compared the location (anterior, mid and posterior) of vocal polyp with the improvement of voice quality, more change was found at mid portion vocal polyp, except the difference of VHI. However, these differences were also not statistically significant (p>0.05). Conclusion : All parameter differences tend to be greater at large vocal polyp and polyp of the mid location.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제14권2호
• /
• pp.69-78
• /
• 1978

It is well known that the aluminizing steel is excellent in corrosion resistance and heat resistance. Therefore it has been used as boiler parts, heat exchanger parts and guide rails which are used under comparatively simple conditions. Recently, it has been noticed that aluminizing steel has high resistance to various atmosphere, high temperature oxidation and seawater resistance. So its usage has been extended widely to the production of parts such as intake and exhaust valve of internal combustion engine, turbine blade and pipelines On ships which required such properties. It is considered that aluminium coated steel is excellent in wear resistance because of high hardness on main ingredient FezAIs of Fe-AI alloy layer existed in diffusion coating layer. And it will beused as a new material taking wear resitance with seawater resistance in marine field. However it is difficult to findout any report concering the wear behaviors or properties of alum in izing steel. In this study the experiment was carried out under the condition of rolling-sliding contact using an Amsler-type wear testing machine at 0.80, 0.91, 1. 10, 1. 25% of slip ratio and 55.43, 78.38, 110.85 kg/mm^2 of Hertz's contact stress in run-in period for the purpose of service-ability test of aluminizing steel as a wear resisting material and obtaining the available design data. The followings are the obtained results from the experimen tal study; 1) The 2nd diffusion material has most excellent wear resistance. This material has brought out about 18% decrease of wear weight in a lower friction load level and 40~G decrease in a higher level comparing to the raw material. 2) Satisfactory effect of wear resistivity cannot be much expected in 2nd diffusion specimens. This is considered due to the formation of fine void in the alloy layer near the boundary to the aluminium layer. 3) Fracture on friction surface of aluminizing steel by the rolling-sliding contact is spalling, and spalling crack occurres initially beneath the specimen surface near the boundary in diffusion coating layer.

• Journal of the Korea Concrete Institute
• /
• 제29권2호
• /
• pp.217-223
• /
• 2017

This research was planned to evaluate the structural performance of post tensioned(PT) concrete member subjected to fire. Prime objective was to suggest some techniques to evaluate the performance of post tensioned concrete beam and slab exposed to high temperature through experiment. To accomplish this objective, the following two scopes have been proceeded to verify the strength reducing ratio of strands and find out the difference of resisting force at the PT concrete members exposed to high temperature through the fire test. The properties of prestressing steel(tendon) in PT concrete beam and slab under variable temperatures were reviewed. The test of this study was shown that stress relaxation occurred at high temperature, and some restoration of tensional force appeared as it got cooling down. The residual tension of the post tensioned beams at 4 hours after reaching the target temperature were 70% at $400^{\circ}C$, 10% at $600^{\circ}C$ and 2% at $800^{\circ}C$. The post tensioned slabs were 94% at $400^{\circ}C$, 84.5% at $600^{\circ}C$ and 62% at $800^{\circ}C$. The reason why the residual tension loss of the post tensioned slab was relatively small was considered to be that the slab was exposed just one side to high temperature and the strength of the strand was restored larger than that of beam. Also, it was confirmed that the post tensioned member inevitably experienced the loss of strength by fire damage, and restoration design of the member should be required to compensate for the value as much as lost strength.