• 동력기계공학회지
• /
• 제11권3호
• /
• pp.22-28
• /
• 2007

Liquefied gas vaporizer is a machine to vaporize liquefied gas such as liquid nitrogen($LN_{2}$), liquefied natural gas(LNG), liquid oxygen($LO_{2}$) etc. For the air type vaporizer, the frozen dew is created by temperature drop (below 273 K) on vaporizer surface. The layer of ice make a contractions on vaporizer. The structure analysis on the heat transfer was studied to see the effect of geometric parameters of the vaporizer, which are length 1000 mm of various type vaporizer. Structure analysis result such as temperature variation, thermal stress and thermal strain have high efficiency of heat emission as increase of thermal conductivity. As the result, Frist, With-fin model shows high temperature distribution better than without-fin on the temperature analysis. Second, Without-fin model shows double contractions better then with-fin model under the super low temperature load on the thermal strain analysis. Third, Vaporizer fin can be apply not only heat exchange but also a stiffener of structure. Finally, we confirm that All model vaporizer can be stand for sudden load change because of compressive yield stress shows within 280 MPa on thermal stress analysis.

• 한국수산과학회지
• /
• 제54권5호
• /
• pp.676-684
• /
• 2021

Euryhaline teleost have extraordinary ability to deal with a wide range of salinity changes. To study the seawater adaptability of rainbow trout Oncorhynchus mykiss (body weight 638±54 g, length 38.6±2 cm) to salinity increase fish were transferred from freshwater to 7, 14, 21, 28 and 32 psu and checked for mortality over 5 days. No mortality was observed in 0-32 psu. In fish transferred to 0-32 psu, blood osmolality was maintained within physiological range. The changes of serum enzyme activities (aspartate transaminase, AST and alanine transaminase, ALT) showed no significant level during experimental period. To explore the underlying molecular physiology of gill and kidney responsible for body fluid regulation, we measured mRNA expression of five genes, Na⁺/K⁺/2Cl^- cotransporter1 (NKCC1), aquaporin3 (AQP3), cystic fibrosis transmembrane conductance regulator (CFTR), glucocorticoid receptor (GR) and growth hormone receptor (GHR) in response to salt stress. Based on our result, rainbow trout could tolerate gradual transfer up to 32 psu for 5 days without mortality under physiological stress. This study suggests to alleviate osmotic stress to fish, a gradually acclimation to increasing salinity is recommended.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.429-432
• /
• 2005

LMTT(Linear Motor based Transfer Technology)는 크게 제어 부, 셔틀 카, 레일로 구성되며, 항만의 자동화를 위한 컨테이너 부두에서 사용되는 새로운 형태의 이송장치이다. 셔틀카는 다시 프레임 부, 구동 부, 휠로 나뉜다. 이 장치를 설계하기 위하여 각 부품에 대한 다양한 연구가 수행되어져야 한다. 이 논문에서는 가로 보가 프레임의 강도에 미치는 영향에 대한 이전의 연구로부터 기초 설계된 프레임에 대해 항만설계기준을 만족하면서 셔틀카의 무게를 최소화할 수 있는 프레임의 치수 최적설계를 수행하였다. 최적화를 위해 설계변수로 프레임 각 부재의 두께를, 목적함수로 프레임의 무게를, 제약조건으로 설계기준 응력과 처짐을 설정하였다.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.567-576
• /
• 1999

An experimental study has been conducted to investigate the effects of the free stream turbulence intensity and Reynolds number on the heat transfer and flow characteristics In the linear turbine cascade. Profiles of the time-averaged velocity, turbulence intensity, and Reynolds stress were measured in the turbine cascade passage. The static pressure and heat transfer distributions on the blade suction and pressure surfaces were also measured. The experiments were made for the Reynolds number based on the chord length, Rec = $2.2{\times}10^4$ to $1.1{\times}10^5$ and the free stream turbulence intensity, $FSTI_1$ = 0.6% to 9.1 %. The uniform heat flux boundary condition on the blade surface was created using the gold film Intrex and the surface temperature was measured by liquid crystal, while hot wire probes were used for the flow measurements. The results show that the free stream turbulence promotes the boundary layer development and delays the flow separation point on the suction surface. It was found that the boundary layer flows on the suction surface for all Reynolds numbers tested with $FSTI_1$ = 0.6% are laminar. It was also found that the heat transfer coefficient on the blade surface increases as the free stream turbulence intensity increases and the flow separation point moves downstream with an increasing Reynolds number. The results of skin friction coefficients are in good agreement with the heat transfer results in that for $FSTI_1{\geq}2.6%$, the turbulent boundary layer separation occurs.

• 한국지반환경공학회 논문집
• /
• 제11권1호
• /
• pp.27-34
• /
• 2010

본 연구에서는 유한요소해석을 실시하여 지반굴착으로 인해 융기(heaving)가 발생하는 지반에 사전에 근입된 말뚝의 거동에 대한 분석을 실시하였다. 수치해석에서는 말뚝과 점토사이 경계면에서의 미끄러짐(소성항복)을 고려하여 그 상호거동에 대하여 고찰하였다. 본 연구에서는 말뚝의 상향변위, 말뚝과 인접지반의 상대변위, 말뚝에 작용하는 전단응력 및 인장력을 분석하였다. 특히, 수직응력의 감소로 인해 말뚝과 인접지반에서의 전단응력이 전이되는 메커니즘에 대한 심도있는 분석을 실시하였다. 굴착에 의해 수직응력이 감소하여 말뚝과 인접지반 사이에서의 상대변위 및 전단응력이 변화하였다. 말뚝 대부분의 위치(Z/L=0.0-0.8)에서는 상향의 전단응력이 발생하였으나, 말뚝 선단부 부근(Z/L=0.8-1.0)에서는 하향의 전단응력이 발생하였고, 이로 인해 말뚝에는 인장력이 발생하였다. Z는 임의의 심도, L은 말뚝의 길이이다. 수치해석을 통해서 분석된 말뚝의 거동에 대하여 상세히 보고하였다.

• Structural Engineering and Mechanics
• /
• 제17권2호
• /
• pp.245-266
• /
• 2004

Incremental launching method is one of the highly competitive techniques for construction of concrete bridges. It avoids costly and time consuming form work and centralizes all construction activities in a small casting yard, thus saving in cost and time against conventional bridge construction. From the quality point of view, it eliminates the uncertainty of monolithic behaviour by allowing high repetitiveness and industrial environment. But, from analysis and design point of view, the most characteristic aspect of incrementally launched bridges is that, it has to absorb the stresses associated with the temporary supports that are gradually taken on by the deck during its launch. So, it is necessary to analyse the structure for each step of launching which is a tedious and time consuming process. Effect of support settlements or temperature variation makes the problem more complex. By using transfer matrix method, this problem can be handled efficiently with minimal computational effort. This paper gives insight into method of analysis, formulation for optimization of the structural system, effect of support settlement and temperature gradient, during construction, on the stress state of incrementally launched bridges.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.399-400
• /
• 2006

LMTT(Linear Motor based Transfer Technology) is a new type of transfer system used in the maritime container terminal fur the port automation, and largely consists of a controller, shuttle car, and rail. The shuttle car is divided into the frame part, the driving part, and wheels. In order to design this system, various researches on each part of it must be conducted. In this study, we dealt with the optimum design for the frame part of the shuttle car designed from previous studies on the strength of the frame with respect to the number of cross beams to minimize the weight of the shuttle car and to satisfy design criteria of cargo-handling systems in container terminal. For the optimization of the frame, thicknesses of each beam were adopted as design variables, the weight of the frame as objective function, and stress and deflection per unit length as constraint condition.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.321-324
• /
• 2006

LMTT(Linear Motor based Transfer Technology) is a new type of transfer system used in the maritime container terminal for the port automation, and largely consists of a controller, shuttle car, and rail. The shuttle car is divided into the frame part, the driving part, and wheels. In order to design this system, various researches on each part of it must be conducted. In this study, we dealt with the optimum design for the mover of the shuttle car designed from previous studies on the strength of the frame with respect to the number of cross beams to minimize the weight of the shuttle car and to satisfy design criteria of cargo-handling systems in container terminal. For the optimization of the mover, thicknesses of each beam were adopted as design variables, the weight of the frame as objective function, and stress and deflection per unit length as constraint condition.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1583-1593
• /
• 2011

As we see the continuation of the increase in the speed of the High Speed railroad worldwide, there is a concern for a possible problem in the connecting transition zone in the railway infrastructure. Honam High Speed railroad's transition zone in the hub for the rotation structures and other supporting structures such as approach slab, sub slab, approach block, etc. Due to its increase in speed of the design speed, and its important role on the driving stability and credibility of the bearing ground performance, we must seek and fine a prevention plan for a cause of differential settlement, as well as the cause of the derailment. In this dissertation, domestic, as well as international design manuals and the applicability of the control standards are studied. Also through the study target, Honam High Speed railroad zone 4-1, we evaluated the connecting componant of the Yeon-Jeong bridge through the eigenvalue and weight transfer of the train when operated at 300km/h, 350km/h, 400km/h, 450km/h, and were able to achieve detailed assessment by checking track behaviors, looking at various components such as the rotation acceleration according to the inversion of the distance length, displace length, displacement and stress distribution. Through these studied, possibility of operating at 400km/h was evaluated based on the condition of the current design basis.

• Earthquakes and Structures
• /
• 제16권3호
• /
• pp.279-293
• /
• 2019

The overall seismic performance of existing pre 1960-70s reinforced concrete (RC) structures is significantly affected by the inadequate length of columns' lap-spliced reinforcement. Due to this crucial structural deficiency, the cyclic response is dominated by premature bond - slip failure, strength and stiffness degradation, poor energy dissipation capacity and low ductility. Recent earthquakes worldwide highlighted the importance of improving the load transfer mechanism between lap-spliced bars, while it was clearly demonstrated that the failure of lap splices may result in a devastating effect on structural integrity. Extensive experimental and analytical research was carried out herein, to evaluate the effectiveness and reliability of strengthening techniques applied to RC columns with lap-spliced reinforcement and also accurately predict the columns' response during an earthquake. Ten large scale cantilever column subassemblages, representative of columns found in existing pre 1970s RC structures, were constructed and strengthened by steel or RC jacketing. The enhanced specimens were imposed to earthquake-type loading and their lateral response was evaluated with respect to the hysteresis of two original and two control subassemblages. The main variables examined were the lap splice length, the steel jacket width and the amount of additional confinement offered by the jackets. Moreover, an analytical formulation proposed by Tsonos (2007a, 2019) was modified appropriately and applied to the lap splice region, to calculate shear stress developed in the concrete and predict if yielding of reinforcement is achieved. The accuracy of the analytical method was checked against experimental results from both the literature and the experimental work included herein.