• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.86-93
• /
• 1999

Ceramic/metal bonded joints have led to increasing use of structural materials such as automobiles and heat engines. A method of strength evaluation focussing on fracture criterion of mixed mode was investigated in {{{{ {Si }_{3 } {N }_{4 } }}}}/metal bonded joint, Also Fracture toughness tests of {{{{ {Si }_{3 } {N }_{4 } }}}}/metal bonded joints with an interface crack were carried out and the stress intensity factors of these joints were analyzed by boundary element method. Form the results the fracture criterion and method of strength evaluation by the fracture toughness were proposed in {{{{ {Si }_{3 } {N }_{4 } }}}}/Metal bonded joints

• Journal of Electrical Engineering and Technology
• /
• v.6 no.1
• /
• pp.123-127
• /
• 2011

To clarify the relations of optical properties to the main factors responsible for the loss and damage of luminous efficacy, a 20 min turn-on/turn-off test for 2,000 h for a ceramic metal halide lamp is conducted. The corrosion rates of the arc tube wall and electrode are estimated based on thermal stress. Wall blackening is attributed to the tungsten being transported from the hot electrode tips to the relatively cold arc tube wall. Furthermore, the grain boundaries of the arc tube are changed by the degradation. Distortion of the electrode is observed, and the ignition and the driving voltage of the load both increase. Finally, the color rendering index and the color coordinates are changed after the degradation. The luminous flux and the intensity of the luminous distribution are decreased significantly.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.2
• /
• pp.145-152
• /
• 1983

An adhesively bonded anisotropic structure containing a part-through crack subjected to in-plane mixed mode deformations is investigated. The problem is reduced to a pair of Fredholm integral equations of the second kind by mathematical analysis. By solving these equations numerically stress intensity factors k$_{1}$ and k$_{2}$ are presented. Two cases are considered with respect to fiber orientations. Case one is to fix the fiber orientations of sound plate bonded to cracked plate with various fiber orientations. The other is to vary fiber orientations for both plates. As boundary conditions, tension and shear loading respectively, are applied to bonded anisotropic plates to observe mixed mode deformations.

• Honam Mathematical Journal
• /
• v.29 no.4
• /
• pp.701-721
• /
• 2007

Recently, a new singular function(NSF) method was posed to get accurate numerical solution on quasi-uniform grids for two-dimensional Poisson and interface problems with domain singularities by the first author and his coworkers. Using the singular function representation of the solution, dual singular functions, and an extraction formula for stress intensity factors, the method poses a weak problem whose solution is in $H^2({\Omega})$ or $H^2({\Omega}_i)$. In this paper, we show that the singular functions, which are not in $H^2({\Omega})$, also satisfy the integration by parts and note that this fact suggests the possibility of different choice of the weak formulations. We show that the original choice of weak formulation of NSF method is critical.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1992.04a
• /
• pp.30-35
• /
• 1992

Since many design problems in the railroad, aerospace and machine structures involve considerations of the effect of cyclic loading, manufacturing and quality control processes must fully account for fatigue of critical components. Due to the sensitivity of the Paris law, it is very important to calculate the ΔK numerically to minimize the error of predicted fatigue life in cycles. It is shown that the p-version of FEM based on LEFM analysis is far better suited for computing the stress intensity factors than the conventional h-version. To demonstrate the proficiency of the proposed scheme, the welded T-joint with crack problem of box car body bolster assembly and a crack problem emanating Iron a circular hole in finite strip have been solved.

• Advanced Composite Materials
• /
• v.16 no.1
• /
• pp.11-30
• /
• 2007

Since delamination often propagates at the interfacial layer between a surface skin and a foam core, a crack arrester is proposed for the suppression of the delamination. The arrester has a semi-cylindrical shape and is arranged in the foam core and is attached to the surface skin. Here, energy release rates and complex stress intensity factors are calculated using finite element analysis. Effects of the arrester size and its elastic moduli on the crack suppressing capability are investigated. Considerable reductions of the energy release rates at the crack tip are achieved as the crack tip approached the leading edge of the crack arrester. Thus, this new concept of a crack arrester may become a promising device to suppress crack initiation and propagation of the foam core sandwich panels.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.109-118
• /
• 1985

특이응력해석을 위한 일반화된 가역상반일 경계분식이 섬유강화복합재를 모형화한 직교 이방성 크랙평판의 수치해를 위하여 발전시켰다. 이 적분방정식은 평판경계에서의 탄성변위와 트랙션의 변수로 구성된 경계분식의 형태로 하중이 없다는 두 크랙면의 경계조건과 유한의 탄성변형에너지 의 개념에서 경계적 분식에 필요한 특성해를 규정하고 대응되는 보조해를 계산하였다. 직교이방 도를 달리한 중앙크랙평판의 응력확대계수를 계산하여 기존해와 비교하였다. 또한 대칭모우드 I 형의 양측크랙평판 및 복합모우드형 편측크랙 일단고정 평판의 응력확대계수가 임의의 섬유방향 각에 따라서 계산되었다.

• Computational Structural Engineering
• /
• v.1 no.2
• /
• pp.111-120
• /
• 1988

The behavior of shear crack is investigated analytically to get a better understanding of the fundamental natura of shear failure mechanism in reinforced concrete beams. Emphasis is placed on the exploration of the major cause of the initiation and the propagation of an inclined shear crack in reinforced concrete beams without web reinforcement. By utilizing a finite element method incorporated into a fracture mechanics, the quantitative reponse of reinforced concrete beams with varying amounts of cracking is examined. Progressions of the cracks are simulated. The analysis gives the information of the state of the stresses at various cracking stages. The results are compared with the experimental results.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1271-1276
• /
• 2008

This study has explained about LED for BLU which is widely used in the kinds of display devices or lighting. It was shown that the open due to delamination were the dominant LED for BLU failure mode and mechanisms from failure analysis of LED samples. Then, we have defined failure as yellowing and 100% reduction of light output intensity of LED for BLU and acceleration factors as temperature and current in Accelerated Life Test(ALT). Finally, we have estimated the Weibull distribution, life-stress relationship, and accelerating factor is used by ALTA Software.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.89-101
• /
• 1995

선형 탄성 등방성 물체 내에 있는 일반적인 복합모드 크랙 문제들을 해석하기 위한 이중 경계적분방정식의 일반식과 계산해법이 제시되었다. 크랙면이 포함된 물체 해석에 있어서 유일한 해를 얻기 위하여, 한 면상의 점에는 변위 경계적분방정식이 적용되었고 마주하고 있는 상대면 상의 점에는 인력 경계적분방정식이 적용되었다. 인력 및 변위 경계적분방정식의 강특이해 및 초특이해 적분항들은 수치해법을 적용하기 전에 정상화되었다. 정상화과정 중 보정되는 강특이적분항이 상대 크랙면 상의 특이해 요소를 따라 직접 적분되는 것을 격리시키기 위하여, 특이해 적분 경로를 완만한 곡면으로 우회시킨 가상의 비특이해 보조경계로 대치하여 적분값을 계산하였다. 제시된 해법의 정확성과 효율성을 예시하기 위하여, 2차원 및 3차원 크랙 문제의 변형 후 모습과 응력강도계수 계산 결과를 보였다.