• Journal of Korean Orthopaedic Sports Medicine
• /
• v.5 no.2
• /
• pp.100-104
• /
• 2006

The Incidence of groin injury was about 10% in football player These injuries occur most commonly in athletes participating in sports Involving cutting, quick accelerations and decelerations and sudden directional changes. Symptoms may range from intermittent episodes of mild discomfort to severe and chronic career-ending pain. Groin injuries may result from a variety of causes. We must keep in mind that many other conditions may also affect the groin. Because of the anatomy of the region is so complex. Ligament/muscle strains, nerve entrapment syndromes, sportsman's hernia, symphysitis, stress fractures and various hip pathologies are reviewed as causes of groin pain are reviewed as common causes of groin pain.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.161-167
• /
• 2001

It is difficult to obtain accurate fracture toughness values using three point bending test(TPB) proposed by RILEM committees because the shape of load-deflection curve is irregular and final crack propagation occurs after some slow stable cracking. However, fracture toughness is easily obtained from crack initiation load in the disk test. In this paper, the fracture properties of high strength concrete disks with center-crack was investigated. For this purpose, the experimental results were compared with the results by finite element analysis(FEA). And the experimental fracture locus was compared with theoretical fracture locus. Also, the results of fracture properties for the degree of concrete strength are presented. It is concluded from this study that results from FEA with maximum stress theory were compared well with the results from experiment. And the degree of concrete strength was contributed to the crack initiation load and fracture toughness, but was not contributed to the failure angle. Also, The discrepancy of fracture locus between the maximum stress theory and the experiment for concrete is considered to depend upon a large energy requirement for inducing the mixed-mode and sliding mode fractures.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.13-19
• /
• 2015

This paper presents a hydraulic fracture propagation model to describe propagation more realistically. In propagating the hydraulic fractures, we have used two criteria: maximum tangential stress to determine the fracture initiation angle and whether a hydraulic fracture intersects a natural fracture. The model was validated for the parameters relevant to fracture propagation, such as initiation angle and crossing ability through natural fracture. In order to check whether a hydraulic fracture crosses a natural fracture, the model results on crossing state excellently matched with the experimental data. In the sensitivity analysis for direction of maximum horizontal stress, frictional coefficient of fracture interface, and natural fracture orientation, the results show that hydraulic fracture intersects natural fracture, and then, propagated suitably with theoretical results according to fracture interaction criterion. In comparison of this model against vertical fracture approach, it was ascertained that there are discrepancies in fracture connectivity and stimulated reservoir volume.

• Korean Journal of Exercise Nutrition
• /
• v.25 no.2
• /
• pp.20-25
• /
• 2021

[Purpose] The aim of this review was to discuss the effects of vitamin D on physical performance and musculoskeletal injuries in athletes and provide information on the field applications of vitamin D. [Methods] A systematic review was conducted to identify studies on vitamin D in athletes that assessed serum vitamin D levels, vitamin D and physical performance, vitamin D and musculoskeletal injuries, and practical guidelines for supplementation of vitamin D. [Results] Several studies reported that a high proportion of athletes had vitamin D insufficiency or deficiency. Low serum levels of vitamin D in athletes were more pronounced in winter than in other seasons, and indoor athletes had lower serum vitamin D levels than outdoor athletes. Low vitamin D levels have been demonstrated to have negative effects on muscle strength, power, and endurance; increase stress fractures and other musculoskeletal injuries; and affect acute muscle injuries and inflammation following high-intensity exercises. Therefore, periodic assessment and monitoring of vitamin D levels are necessary in athletes; the recommended serum level of 25(OH)D is > 32 ng/mL and the preferred level is > 40 ng/mL (-1). In those with low levels of vitamin D, exposure to sunlight and an improved diet or supplements may be helpful. Particularly, 2000-6000 IU of supplemental vitamin D3 can be consumed daily. [Conclusion] Vitamin D is a potential nutritional factor that can significantly affect physical performance and musculoskeletal injuries in athletes. The importance and role of vitamin D in athletes should be emphasized, and the current levels of vitamin D should be assessed. Therefore, it is essential to periodically evaluate and monitor serum vitamin D levels in athletes.

• International Journal of Korean Welding Society
• /
• v.4 no.1
• /
• pp.53-60
• /
• 2004

Adhesive-bonded joints are widely used in the industry. Recently, applications of adhesive bonding joints have been increased extensively in automobile and aircraft industry. The strength of adhesive joints is influenced by the surface roughness, adhesive shape, stress distribution, and etc. However, the magnitude of the influence has not yet been clarified because of the complexity of the phenomena. In this study, as the fundamental research of adhesive bonding joints, the effects of adhesive shape and loading speed on bonding strength properties and durability of aluminum to polycarbonate single-lap joints were studied. To evaluate the effect of adhesive shape, several modified shapes were used, and loading speeds were varied from 0.05 to 5mm/min. As a result, the load distribution showed a brittle fracture tendency. The trigonal edged single lap and bevelled lap joints showed the higher strength than the plain single lap, trigonal single lap, joggle lap and double lap joints in same adhesive area. The fractures of trigonal single lap and trigonal edged single lap joints that had the higher strength level were shown as the mixture type of the cohesive and interfacial-failure, mostly joggle lap joints that had the lower strength level were shown as the adhesive-failure.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.2
• /
• pp.167-174
• /
• 2003

This paper presented the results of cyclic loading tests of 7 full-scale beams to column subassemblages with improved connection detail i.e., fillets of the stiffening plates at the column corners and ends of the stiffener-to-beam flange weld. Major findings from the test results were: (1) Fillets reduced the stress concentrations that may cause early brittle fractures and considerably improved the cyclic performance compared to the detail without fillets. (2) As the width of the stiffening plate increased, the stiffness and peak strength increased and energy dissipation capacity decreased. (3) While all specimens failed by a fracture, they could develop a total rotation of 0.04 radian required for special moment resisting frames.

• Computers and Concrete
• /
• v.12 no.3
• /
• pp.261-283
• /
• 2013

This paper aims to contribute to the three-dimensional generalization of numerical prediction of crack propagation through the formulation of finite elements with embedded discontinuities. The analysis of crack propagation in two-dimensional problems yields lines of discontinuity that can be tracked in a relatively simple way through the sequential construction of straight line segments oriented according to the direction of failure within each finite element in the solid. In three-dimensional analysis, the construction of the discontinuity path is more complex because it requires the creation of plane surfaces within each element, which must be continuous between the elements. In the method proposed by Chaves (2003) the crack is determined by solving a problem analogous to the heat conduction problem, established from local failure orientations, based on the stress state of the mechanical problem. To minimize the computational effort, in this paper a new strategy is proposed whereby the analysis for tracking the discontinuity path is restricted to the domain formed by some elements near the crack surface that develops along the loading process. The proposed methodology is validated by performing three-dimensional analyses of basic problems of experimental fractures and comparing their results with those reported in the literature.

• Archives of Reconstructive Microsurgery
• /
• v.24 no.2
• /
• pp.68-74
• /
• 2015

Purpose: The reconstruction of femur and tibia defects following tumor resection remains a surgical challenge. The clinical outcome of free vascularized fibula graft (VFG) reconstruction with locking plate for massive femur and tibia defects of more than 10 cm that were secondary to skeletal tumor resection is reported. Materials and Methods: Thirteen patients with a mean follow-up of 3.3 years were reviewed. Seven patients received vascularized fibula grafts in the femur and six in the tibia. The mean bony defect of the femur and tibia was more than 10 cm and the length of the grafted fibula was more than 15 cm. All defects were stabilized with long locking plates. Results: All patients were free of disease at final follow-up; All VFGs were transferred successfully. All patients had a successful outcome with bony union. Stress fractures of the grafted fibula had occurred but the locking plate stabilized the fracture and healed until the last follow-up. All patients were able to walk without a brace after a mean of 9 months postoperatively. Conclusion: VFG with locking plate is a reliable reconstructive procedure for massive femur and tibia defects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.783-790
• /
• 2004

Adhesive-bonded joints are widely used in the industry. Recently, applications of adhesive bonding joints have been increased extensively in automobile and aircraft industry. The strength of adhesive joints is influenced by the surface roughness, adhesive shape, stress distribution, and etc. However, the magnitude of the influence has not yet been clarified because of the complexity of the phenomena. In this study, as the fundamental research of adhesive bonding joints, the effects of adhesive shape and loading speed on bonding strength properties and durability of aluminum to polycarbonate single-lap joints were studied. To evaluate the effect of adhesive shape, several modified shapes were used, and loading speeds were varied from 0.05 to 5 mm/min. As a result, the load-displacement distribution was shown a brittle fracture tendency. The trigonal edged single lap and bevelled lap joints showed the higher strength than the plain single lap, trigonal single lap, joggle lap and double lap joints in same adhesive area. The fractures of trigonal single lap and trigonal edged single lap joints that had the higher strength level were shown as the mixture type of the cohesive and interfacial-failure, mostly joggle lap joints that had the lower strength level were shown as the adhesive-failure.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.4
• /
• pp.286-289
• /
• 2002

In the treatment of mandibular condylar fractures, arthrocentesis, lavage and selective intermaxillary fixation were performed after closed reduction. In this lavage group, the physiotherapy performed for 3-6 months after injury. in control group, continuous intermaxillary fixation was done for 1-3 weeks, and physiotherapy followed in the same method of the lavage group. In the comparative study of the both groups, the following results are shown. 1. Compared to control group, the lavage group had a slightly superior result at range of motion, joint pain and occlusal deviation, from I day after arthrocentesis to 6 months after injury. 2. The significant differences between both groups were seen at range of motion and joint pain in 1 month after injury. 3. At 6 months after injury, the differences between both groups were not significant at range of motion, joint pain and occlusal deviation. From this study, in the mandibular condylar fracture, the arthrosentesis, lavage and selective intermaxillary fixation after closed reduction can improve symptoms such as joint pain and occlusal deviation, also increase range of motion. in this therapeutic way, intracapsular hemarthrosis which can cause TMJ ankylosis or dysfunction can be removed effectively. in addition, patient's discomfort such as swallowing disturbance, speech disturbance and emotional stress can be reduced signuficantly.