• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.17-25
• /
• 1994

Fully developed turbulent flow through three concentric annuli with both the rough inner and outer walls was experimentally investigated for a Reynolds number range Re = 15, 000 - 85, 000. Measurements were carried out for the pressure drop, the positions of zero shear stress and maximum velocity, and the velocity distributions in annuli of radius ratios, ${\alpha}$=0.26, 0.4 and 0.56, respectively. The experimental results showed that the positions of zero shear stress and maximum velocity were only weakly dependent on the Reynolds number.

• Journal of Plant Biotechnology
• /
• v.30 no.2
• /
• pp.195-199
• /
• 2003

Extracts of Escherichia coli as a elicit were treated to suspension cultures of Streptanthus tostus in order to observe the effect on the pholem development. By the elicit treatment, cell wall, sieve endoplasmic reticulum (SER) and p-protein were normally synthesized, but the structure of amyloplast was changed from a round form to irregular and swollen unhalthy form with a tiny starch granular. Oil drops were new synthesized and accumulated in a large oleoplast and proteins were also accumulated in a single membrane. The concentration of sucrose in the phloem, which was induced during the elicit treatment, was higher than normally developed phloem cells. These results suggest that phloem cells might be changed in the normal cycles of metabolism of lipids, carbohydrates and proteins to overcome during the eilicit stress.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.156-163
• /
• 2005

A monoleaflet polymer artificial heart valve showed the remarkable improvement in pressure drop compared with other types of artificial valve. So, in this study we designed a monoleaflet polymer artificial valve with two supporting members to minimize the deformation and bending stress of the valve with respect to the variation of the gap between two supporting members using nonlinear contact analysis. The marginal valve thickness was also predicted in accordance with the relationship between the thickness and horizontal displacement in order to prevent the dislocation of the valve tip from the frame wall.

• Journal of Applied Reliability
• /
• v.7 no.1
• /
• pp.1-11
• /
• 2007

This paper presents a derating design approach for reliability improvement of a regulator IC. The IC is usually used in SMPS. The main failure mechanism of interest is voltage drop due to the package delamination mainly caused by two stresses, i.e. temperature and current. The lifetime under stresses is modeled as a function of stresses and time using accelerating life testings. Quantitative and qualitative variation in lifetime according to stress variations are investigated using the modeled lifetime. Stress levels would be determined to achieve required reliability levels in the aspect of derating design for reliability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1596-1599
• /
• 2009

Mobile ODF (one drop filling) portable display such as mobile phone and application product is needed high reliability than notebook, monitor and TV. Therefore, material development in order to optimize mobile & application ODF panel is needed. Through considering mobile ODF process and design, we have developed method of material matching test by several tests which is heat stress, UV stress and ODF process condition. So we have developed a material with characteristics of high reliability for mobile ODF panel.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.237-242
• /
• 2008

Physical properties of water, such as dielectric constant and ionic product, significantly vary with the density of water. In the supercritical conditions, since density of water widely varies with pressure, pressure has a strong influence on physical properties of water. Dielectric constant represents a character of water as a solvent, which determines solubility of an inorganic compound including metal oxides. Dissociation equilibrium of an acid is also strongly dependent on water density. Dissociation constant of acid rises with increased density of water, resulting in drop of pH. Density of water and the density-related physical properties of water, therefore, are the major governing factors of corrosion and environmentally assisted cracking of metals in supercritical aqueous solutions. This paper discusses importance of "physical properties of water" in understanding corrosion and cracking behavior of alloys in supercritical water environments, based on experimental data and estimated solubility of metal oxides. It has been pointed out that the water density can have significant effects on stress corrosion cracking (SCC) susceptibility of metals in supercritical water, when dissolution of metal plays the key role in the cracking phenomena.

• Korean Journal of Materials Research
• /
• v.20 no.1
• /
• pp.7-11
• /
• 2010

Yttria stabilized zirconia (Y-CSZ) single crystals show plastic deformation at high temperatures by activating dislocations. The effect of strain rate on the plastic behavior of this crystal was studied. As increasing strain rate from $\varepsilon=1.04\times10^{-5} sec^{-1}$ to $2.08\times10^{-5} sec^{-1}$ the yield drop was suppressed and resulted in higher Young's modulus and yield stress. Dislocation structures of the strained crystals were analyzed using a transmission electron microscope to elucidate the plastic behavior of these crystals. In the early stage of plastic deformation, dislocation dipoles and prismatic dislocation loops were formed in both samples. However, dislocation density was increased by increasing strain rate. Strong sessile dislocations were observed in the sample with higher strain rate, which may cause the higher work hardening.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.11
• /
• pp.99-103
• /
• 1993

A monoleaflet polymer artificial heart valve which showed the remarkable improvement in pressure drop compared with other types of artificial valve was designed to decrease the deflection in vertical direction and the displacement or the valve tip in horizontal direction. Stress distribution change was studied as the location of the supporting members or the valve frame changed. And it was found that using the valve tip horizontal displacement the minimum valve thickness could be obtained in order to prevent the gap between the valve tip and the frame wall.

• Journal of Korean Society of Forest Science
• /
• v.87 no.1
• /
• pp.50-56
• /
• 1998

Thirty-six $F_3$ hybrid poplar (Populus trichocarpa${\times}$P. deltoides) clones were fumigated with ozone to select for ozone sensitive and resistant clones. Fumigation was applied for 6 to 8 hours each day for approximately 3 months at ozone concentrations of 90 to 115 ppb using by open-top chambers. Height, diameter, number of leaves, total biomass, biomass components, root/shoot ratios, leaf drop and stomatal response were investigated. In summary, ozone generally reduced height, diameter, number of leaves, total biomass, and root/shoot ratios. Ozone stress induced leaf drop and foliar senescence in trees. This study showed very low relationship between total biomass and stomatal conductance. Increased plant resistant to ozone is not always correlated with stomatal behaviour. Probably, characterization of biochemical and other physiological responses to ozone exposure can provide a better understanding of tree response to ozone environment.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.21-27
• /
• 2007

Nickel bumps for ACF(anisotropic conductive film) flip chip application were fabricated by electroless and electro plating and their mechanical properties and impact reliability were examined through the compressive test, bump shear test and drop test. Stress-displacement curves were obtained from the load-displacement data in the compressive test using nano-indenter. Electroplated nickel bumps showed much lower elastic stress limits (70MPa) and elastic moduli ($7.8{\times}10^{-4}MPa/nm$) than electroless plated nickel bumps ($600-800MPa,\;9.7{\times}10^{-3}MPa/nm$). In the bump shear test, the electroless plated nickel bumps were deformed little by the test blade and bounded off from the pad at a low shear load, whereas the electroplated nickel bumps allowed large amount of plastic deformation and higher shear load. Both electroless and electro plated nickel bumps bonded by ACF flip chip method showed high impact reliability in the drop impact test.