• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.115-121
• /
• 1999

This investing was carried out to evaluate the alteration of stress distribution on teeth and esthetic crowns. Analyzing the stress distribution by the two-dimensional finite element methods, a model of lower 1st molar according to the porcelain fused metal crown an the porcelain fused glass ceramic core crown and the all glass ceramic crown. 1. The pattern of stress distribution showed no apparent differences. 2. The greatest von Mises values were concentrated around the central fossa of all esthetic crowns. The greatest Maximum principle value were concentrated around the interface between the base of esthetic crown and the abutment tooth. It was found that the apatite glass ceramic could be applicable for use in dental crown prosthesis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권5호
• /
• pp.477-483
• /
• 2013

현재 사용되는 윈드라스 베이스 프레임은 큰 외부적 하중에도 높은 강성을 얻기 위해 큰 부피와 많은 비용을 들여 설계되어진다. 본 연구에서는 기존의 윈드라스 베이스 프레임이 가지고 있는 높은 강성과 구조 경량화를 동시에 만족 시킬 수 있는 최적형상의 개념 설계를 도출하는 것이 목적이다. 따라서 초기 모델에 대한 유한요소해석을 바탕으로 하여 위상 최적화, 치수 최적화 기법을 적용하여 개념 설계를 진행하였으며 초기 모델과 최적화된 모델을 비교하여 결과로 나타내었다. 그 결과 위상 최적화 결과 초기 모델보다 응력은 약 6MPa 상승하였고 질량은 약 560kg 감소하였다. 또한 치수 최적화의 경우 초기 모델보다 응력은 약 7MPa 상승하였지만 질량은 약 1,560kg 감소한 형상을 얻을 수 있었다.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.201-209
• /
• 2009

The objective of present research work is to design the heat conductive mould to improve cooling characteristics of the injection mould for a mouse. In order to obtain the high cooling rate of the mould, a heat conductive mould with three different materials was designed. The materials of the base structure, the mid-layer and the molding part of the heat conductive mould were chosen as Cu-Ni alloy (Ampcoloy 940) to improve the heat conductivity of the mould, Ni-Cu alloy (Monel 400) to reduce a thermal stress, injection tool steel (P21), respectively. Through the three-dimensional transient heat transfer analysis and the thermal stress analysis, the effects of the geometrical arrangement of each material on the cooling characteristics and the thermal stress distribution were examined. From the results of the analyses, a proper design of the thermal conductive mould was obtained.

• 한국도로학회논문집
• /
• 제11권1호
• /
• pp.195-201
• /
• 2009

이 논문에서는 다층탄성해석과 유한요소법을 사용하여 도로설계를 위한 도로내 주요 변형률을 계산하여 유사한 결과치를 양산하는 경우를 비교 분석하였다. 비록 유한요소법이 보다 나은 모델이라는 것이 입증되긴 했지만, 다층탄성해석 프로그램이 간편성으로 인해 여전히 도로설계를 위해 많이 사용되어 지고 있으므로 다층탄성해석 프로그램을 사용한 주요 변형률의 예측이 시급한 실정이다. 이 연구에서는 KENLAYER프로그램을 사용하여, 비선형 이방성 기층거동을 고려한 유한요소법을 사용했을 때 얻어지는 도로내 주요 변형을 예측할 수 있는 분석기법이 소개된다.

• 대한간호학회지
• /
• 제22권3호
• /
• pp.271-296
• /
• 1992

The purposes of this study were 1) to identify patterns and trends of studies of anxiety and stress and 2) to provide direction on which to base further research. Research studies of anxiety and stress were selected from journals of medical and nursing schools, the Korean Nurse, the Korean Nurses' Academic Society Journal, the Central Journal of Medicine, the New Medical Journal, Monthly Nurse, and from theses and dissertations, which had been conducted for the 20 years from 1970 to 1990. The total population of the studies numbered 463. Seven studies were excluded from the analysis because of duplication, so that 252 studies of anxiety and 204 of stress were analyzed. These studies were analyzed for 1) time of publication or presentation, 2) research design, 3) characteristics of subjects used in each study, 4) types of correlated variables, and 5) types of nursing interventions. Findings obtained in the study were as follows : 1. The number of studies related to anxiety and stress has increased rapidly since the early 1980's. 2. The studies were primarily descriptive throughout the 20 years. However, correlational studies, comparative studies and experimental studies slowly increased. 3. Anxiety studies tend to be conducted more on patients and stress studies with normal subjects in non - experimental research. However, experimental studies were conducted more with patients than with normal subjects. 4. In correlational studies, the trend was to study physical conditions in relation to anxiety, and coping and adaptation in relation to stress. 5. In experimental studies, teaching and information therapy and relaxation were the most popular interventions for anxiety, and supportive care for stress. On the bases of these findings, the following recommendations were made : 1. These patterns of studies related to anxiety and stress in Korea need to be compared with studies conducted in other countries. 2. More attention is needed in terms of research design, reliability and validity of tools, and results of statistical analysis. 3. Meta -analysis should be done to analyze and integrate the results of various studies. 4. For theory testing and identification of useful intervention methods, experimintal studies with the same protocols must be conducted rather than more descriptive studies.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권4호
• /
• pp.385-393
• /
• 2007

The strength evaluation of the most weakest junction part is required for the safety design of all structures. Most of all. in order to enhance the reliability and safety of the welding part. whose use is the highest, it is very important to establish the efficient structure manufacturing technology by studying and investigating the evaluation of fatigue strength in various environments. This study analyzed the relations of da/dN, and th according to the welding methods of SMAW, FCAW, and SAW. In the stage II. the value of stress intensity factor range was the highest in SMAW welding method of stress ration R=0.1, and appeared under the sequence of FCAW and SAW and as the completion section of stress intensity factor was low, threshold stress intensity factor was lowly formed in da/dN - The fatigue life of each welding method is sensitively worked in high stress ratio. judging from the fact that the width of life reduction increases in the high stress ratio zone compared to the width of life reduction in the low stress ratio zone. In the fatigue limit of welding methods before corrosion. the welding of SMAW and FCAW shows the same fatigue limit compared to Base metal, and SAW holds the lowest fatigue limit value.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.38-44
• /
• 1996

The CAD system for design and drawing of limit gauges was constructed and developed. This system was made by Visual Basic program. Using this system, drawings together with concerned data for the manufacturing of limit gauges are generated on the screen, file and printer. The data base was constructed by referring handbooks, textbooks, relevant standards and regulations. This system was proved a powerful tool for design and drawing of limit gauges by actual applications. The output drawings from this system are in good agreement with the drawings and data of the concerned standards and regulations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.395-403
• /
• 2007

Railroad track consists of relatively simple structures such as rail, sleeper, ballast. Roadbed shares vertical pressure by train load which passed through rail to ballast as base that supports the track. For evaluating stress and displacement of roadbed due to the railroad load is an important role on the track as a basic data for estimation of the durability and design of the roadbed thickness. GEOTRACK program applied multi-layered theory was developed for analyzing railroad track structure. GEOTRACK program is a sort of numerical analysis program which has advantage that can analysis component of track by simple method. In this study, this program was used to preform the numerical analysis by changing track conditions and roadbed conditions such as tie, reinforced roadbed, dynamic wheel load, Resilient modulus and so on. Further detail will be presented on the paper.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.58-63
• /
• 2008

The short-term high temperature creep rupture behavior of Ni-based Alloy718 steels jointed by friction welding wasinvestigated at the elevated temperatures of 550 to $700^{\circ}C$ under constant stress conditions. The creep rupture characteristics such as creep stress, rupture time, steady state creep rate, and initial strain were evaluated. Creep stress has a quantitative correlation between creep rupture time and steady state creep rate. The stress exponents (n, m) of the experimental data at 550, 600, 650 and $700^{\circ}C$ were derived as 26.1, -22.4, 22.5, -18.5, 17.4, -14.3 and 6.9, -8.1, respectively. The stress exponents decreased with increasing creep temperature. The creep life prediction was derived by the Larson-Miller parameter (LMP) method and the result equation obtained is as follows: T(logtr+20)=-0.00148${\sigma}^2$-3.089${\sigma}$+23232. Finally, the results were compared with those of the base metal for Alloy718.

• 기본간호학회지
• /
• 제26권2호
• /
• pp.86-95
• /
• 2019

Purpose: The aim of this study was to examine the effects of aroma hand massage on stress, fatigue, and sleep in sophomore nursing students. Methods: This study was a quasi-experimental design with a nonequivalent control group and a pre-post test was used. Thirty-seven sophomore nursing students were recruited. The experimental group (n=18) underwent 40 minutes aroma hand massage which was provided by the research assistant. The research assistant was trained with a video clip for aroma hand massage that was developed by Korea Aroma Association. Aroma oil contained lavender essential oil and sweet orange oil mixed with a jojoba oil base. The control group (n=19) did not receive any other treatments related aroma and massage. Results: Significant improvements were exhibited in scores for stress (t=-2.61, p=.013) and fatigue in the experimental group (t=-2.05, p=.047) compared to the control group. However, differences in sleep between two groups were not statistically significant (t=1.23, p=.277) between two groups. Conclusion: The results of this study suggest that aroma hand massage could be useful to decrease stress and fatigue levels for sophomore nursing students. Therefore, results of this study can be used as a basis of health care programs for reducing stress of nursing students.