• 오토저널
• /
• 제4권2호
• /
• pp.35-46
• /
• 1982

This paper deals with residual stress characteristics of ion-nitrided metal which is primarilly concerned with the effects of added carbon content in gas atmosphere. A small optimal amount of carbon content in gas atmosphere increase compound layer thickness, as well as to increase diffusion layer thickness and hardness. The residual stress and deflection of the specimens was measured in various elevated temperature at the surface of ion-nitrided metal and the internal stress distribution was calculated. It is found that compressive residual stress at the compound layer is largest at the compound layer, and decreases as the depth from the surface increases.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.379-384
• /
• 2009

Epoxy resin based encapsulants are widely used in semiconductor packaging applications. Epoxy resin based encapsulants are often subject to crack or delamination during the reliability test due to the thermal stress caused by high modulus nature of epoxy resins. Epoxy functional siloxanes are often added into epoxy resin to reduce the modulus so that the thermal stress can be reduced. Epoxy functional siloxanes, additives for reduced modulus, were synthesized and added into the curable epoxy resins. The modulus and the coefficient of thermal expansion (CTE) were also measured to investigate the thermal stress and to see whether the epoxy functional siloxane adversely affects the CTE or not. As a result, around 26% to 72% of thermal stress reduction was observed with no adverse effect on CTE.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.369-372
• /
• 2000

ESO(Evolutionary Structural Optimization) method is known that elements involved low stress value are removed from the previous model or that elements are added around elements involved high stress level on it and then the optimized model is obtained with required weight. Rejection ratio/addition ratio and evolutionary ratio are predefined and elements having lower/higher stress than reference stress, which average Mises stress on edge elements times rejection ratio, are deleted/added. In this study, when the plate having a cutout is subjected various in-plane load, a cutout shape is optimized using ESO method. ANSYS is used to analyse a finite element model and optimization procedure is made by APDL (ANSYS Parametric Design Language). ESO method is useful in rather than a complex structure optimization as well as a cutout shape optimization.

• 산업식품공학
• /
• 제15권2호
• /
• pp.116-121
• /
• 2011

과숙청과물에서 추출한 조효소액을 연화제로 사용하여 소시지 제조 과정에 있어 첨가 후 물성학적 성질의 변화를 파손강도와 응력완화현상을 이용하여 측정, 분석하였다. 키위, 포도, 배 중에서 키위가 가장 뛰어난 연육 효과를 보였으며 함량이 증가할수록 연화되는 정도가 컸다. 가열온도는 $70^{\circ}C$에서 최대의 연육 효과를 나타내었으며 온도를 높일수록 점탄성의 성질이 크게 나타났다. 각 제조조건에 따른 응력완화 실험에서는 모든 초기응력, 잔존평형응력, 탄성성분과 점성성분이 파손강도의 변화와 같은 경향을 나타내었다. 응력완화실험을 통하여 측정한 연화제 사용 소시지의 물성을 수학적 모델에 적용하여 조직의 변화를 수치화 하여 설명하였다.

• Preventive Nutrition and Food Science
• /
• 제14권1호
• /
• pp.37-42
• /
• 2009

The protective activity of seolitae chungkukjang added with green tea against oxidative stress was investigated under the cellular systems using LLC-$PK_1$ cells. The treatment of 2,2'-azobis(2-aminopropane) dihydrochloride (AAPH) showed increase in lipid peroxidation, and decrease in endogenous antioxidant enzymes activity and cell viability. However, the methanol extract of seolitae chungkukjang inhibited lipid peroxidation by 58.3%, and increased cell viability up to more than 60%. In addition, it enhanced superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) activities. Seolitae chungkukjang improved oxidative stress-induced cellular injury through the radical scavenging activities. In particular, the addition of green tea in seolitae chungkukjang showed stronger effect against oxidative stress induced by AAPH. The more addition of green tea resulted in the greater antioxidative effect through elevation in activities of SOD and GSH-Px, and inhibition of lipid peroxidation, eventually leading to increase in cell viability. Theses results suggested that seolitae chungkukjang added with green tea have protective effects from cellular oxidative damage and could be considered as an application for the development of chungkukjang with functionality.

• 한국지진공학회논문집
• /
• 제22권3호
• /
• pp.139-147
• /
• 2018

In the present study, effective hydrodynamic pressure modeling methods for three-dimensional earthquake safety analysis of a dam intake tower structure are investigated. Time history analysis results using the Westergaard added mass and Chopra added mass methods are compared with the one by the CASI (Coupled Acoustic Structural Interaction) method, which is accepted as giving almost exact solutions, to evaluate the difference in displacement response, stress and dynamic eccentricity. The 3D time history analysis of a realistic intake tower, which has the standard geometry widely used in Korea, shows that the Chopra added mass method gives similar results in displacement and stress and less conservative results in dynamic eccentricity to CASI ones, while the Westergaard added mass yields much more conservative results in all measures. This study suggests to use the CASI method directly for three-dimensional earthquake safety analysis of a dam intake tower, if computationally possible.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1997년도 특별강연 및 춘계학술발표 개요집
• /
• pp.107-111
• /
• 1997

In this paper distribution of welding residual stress on the double fillet welded joint which exits and not exits root gap, i.e. full penetration and partial penetration is investigated by two dimensional cunduct and thermal elasto-plastic analysis. And stress distribution on notch-tip of the structure where welding residual stress regarded as initial stress and then external load is added is also investigated.

• Journal of Biosystems Engineering
• /
• 제14권1호
• /
• pp.33-40
• /
• 1989

The flow properties of water added com-cob-mix(CCM) were studied in order to provide basic information for designing its pumping system. For the study, a model system similar to actual situation was constructed. From the experiment, it can be concluded that the flow properties of the water added CCM has close relationship with its moisture content as follows; 1. The pressure drop caused by friction was very low when the moisture content of water added CCM was more than 70%. However, when the moisture content of the material is about 60%, the pressure drop increases up to 10 kPa/m at low pumping speed, and 20 kPa/m at high pumping speed, respectively. 2. The water added CCM having about 65% moisture content showed pseudo-plastic flow characteristics. 3. As the moisture content of the material decreases, the shear stress increases more rapidly than the shear rate does. Finally, below approximately 60% moisture, the shear stress becomes a linear relationship with the shear rate. 4. It was possible to pump the material having the moisture content down to 58% through a pipe having 80 mm diameter by a pump operating at 234 rpm. However, by either increasing the diameter of the pipe or decreasing the pumping speed, it can be possible to pump the material having lower moisture content than 55%.

• Nuclear Engineering and Technology
• /
• 제37권3호
• /
• pp.287-292
• /
• 2005

[ $\pi$ ]The effects of silica-based additives have been investigated to improve the creep property of a $UO_2$ pellet. The additive composition, $50wt\%SiO_2-47wt{\%}CaO-3wt\%Cr_2O_3$ (SCC), was selected according to the dihedral angle and the distribution of the second phase. It was observed that the creep rate of the $0.07 wt\%$ SCC-added $UO_2$ was slower than that of the pure $UO_2$. However, the creep rate of the $0.22 wt\%$ SCC-added $UO_2$ was about 3_48 times faster than that of the pure $UO_2$, depending on the applied stress in the lower stress range. In the case of the $0.35 wt\%$ SCC-added $UO_2$, the creep rate decreased in comparison with that of the $0.22 wt\%$ SCC-added $UO_2$. The observed enhancement in the creep rate might depend on a balance between the positive role of the viscous intergranular phase and the negative roles of the additives and the grain growth.

• 대한가정학회지
• /
• 제35권2호
• /
• pp.33-47
• /
• 1997

The purpose of the study is to examine the differences between rural and urban in the factors and the level of stress in adolescent, inner control and communication with parents. Also, It is to research the influence of environmental variables, inner control and communication with parents on adolescent's stress in sides of rural and urban. Therefore, I provide needed data in instructing students. For the data set, academic high school students in second grade in a town for rural and Su-Seung gu, Dal-Sugu, chung gu in Dae-gu for urban were chosen. The data were analyzed with the frequency, percentage, factor analysis Mean, S.D, reliability, t-test, regression in use of Spss PC+ Program. The main results are as follow. First, for rural students, stress level is displayed studies, future0affair, life-attitude, companions, self-assurance and home life in order by lower sphere. For urban students, it is displayed future-affair, studies, life-attitude, companions, self-assurance and home life in order by lower shpere. In case of rural "I don't know effective study method" is highly displayed by factors. In case of urban. "I am tired of a competitive life" is highly displayed. The mean of stress level is 3.22 for rural and 3.07 for urban. The differences between rural and urban are showed in self-assurance, studies and companions. Finally when we see the stress generally the stress level is higher in rural high school students than in urban high school students. Second, rural students are lower displayed than urban students in inner control and communication with parents. There is no difference urban students in inner control and communication with parents. There is no difference in communication with a mother. third, influential variables on stress level are inner control, communication with parents, satisfaction with companions and school life as environmental variables in sides of rural and urban. Physical condition is added for rural and sex for urban Finally we get the result that stress level is high in low inner control, poor communication with parents, bad companions and unsatisfied school life for both rural and urban. Bad physical condition for rural and female for urban are added.