• Composites Research
• /
• 제13권6호
• /
• pp.30-38
• /
• 2000

본 연구에서는 낙추충격 시험시스템을 제작하여 낙추의 응력파 전파 현상을 고려한 CFRP적층판의 충격흡수특성 및 충격강도를 평가하였으며, 초음파 C-스캔너를 이용하여 내부손상영역을 관찰하여 시험편의 손상면적과 흡수에너지의 상관관계를 규명하였다. 적층배향이 다른 직교이방성 시험편이 의사등방성 시험편의 충격에너지와 흡수에너지 수준을 보면 의사등방성 시험편이 흡수에너지가 높게 나타났지만, 충격에너지와 박리면적의 크기는 별 차이가 나타나지 않았으며 계면수가 많은 시험편이 충격에너지를 많이 흡수하였다. 적층수 및 적층방향이 동일한 경우, GFRP 프리프레그를 삽입한 시험편이 그렇지 않은 시험편보다 흡수에너지가 높게 나타났다.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.48-56
• /
• 2001

In this paper, this study aims at the evaluation on the characteristics of CFRP laminate plates using a falling weight impact tester. The experiment was conducted on several laminates of different orientation. A system was built far measur- ing the impact strength of CFRP laminates in consideration of stress wave propagation theory using a falling weight impact tester. Delamination areas of impacted specimens for the different ply orientation were measured with ultrasonic C- scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having flour interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy oft hybrid specimen containing a GFRP layer was higher than that of normal specimens.

• Geomechanics and Engineering
• /
• 제6권6호
• /
• pp.531-544
• /
• 2014

Studies of earthquakes over the last 50 years and the examination of dynamic soil behavior reveal that soil behavior is highly nonlinear and hysteretic even at small strains. Nonlinear behavior of soils during a seismic event has a predominant role in current site response analysis approaches. Common approaches to ground response analysis include linear, equivalent linear and nonlinear methods. These methods of ground response analysis may also be categorized into time domain and frequency domain concepts. Simplicity in developing analytical relations and accuracy in considering soils' dynamic properties dependency to loading frequency are benefits of frequency domain analysis. On the other hand, nonlinear methods are complicated and time consuming mainly because of their step by step integrations in time intervals. In part Ι of this paper, governing equations for seismic response analysis of surcharged and layered soils were developed using fundamental of wave propagation theory based on transfer function and boundary conditions. In this part, nonlinear seismic ground response is analyzed using extended HFTD method. The extended HFTD method benefits Newton-Raphson procedure which applies regular iterations and follows soils' fundamental stress-strain curve until convergence is achieved. The nonlinear HFTD approach developed here are applied to some examples presented in this part of the paper. Case studies are carried in which effects of some influencing parameters on the response are investigated. Results show that the current approach is sufficiently accurate, efficient, and fast converging. Discussions on the results obtained are presented throughout this part of the paper.

• Steel and Composite Structures
• /
• 제50권1호
• /
• pp.89-105
• /
• 2024

Multichannel analysis of surface waves (MASW) method has exhibited broad application prospects in the nondestructive detection of interfacial debonding in steel-concrete composite structures (SCCS). However, due to the structural diversity of SCCS and the high stealthiness of interfacial debonding defects, the feasibility of MASW method needs to be investigated in depth. In this study, synthetic parametric study on MASW nondestructive debonding detection for SCCSs is performed. The aim is to quantitatively analyze influential factors with respect to structural composition of SCCS and MASW measurement mode. First, stress wave composition and propagation process in SCCS are studied utilizing 2D numerical simulation. For structural composition in SCCS, the thickness variation of steel plate, concrete core, and debonding defects are discussed. To determine the most appropriate sensor arrangement for MASW measurement, the effects of spacing and number of observation points, along with distances between excitation points, nearest boundary, as well as the first observation point, are analyzed individually. The influence of signal type and frequency of transient excitation on dispersion figures from forwarding analysis is studied to determine the most suitable excitation signal. The findings from this study can provide important theoretical guidance for MASW-based interfacial debonding detection for SCCS. Furthermore, they can be instrumental in optimizing both the sensor layout design and signal choice for experimental validation.

• 비파괴검사학회지
• /
• 제21권4호
• /
• pp.398-405
• /
• 2001

리벳이음은 응력집중 등에 의한 피로균열 발생 가능성이 높은 구조특성을 가지므로 구조물의 안전성 확보를 위하여 비파괴 평가 방법에 의하여 리벳홀 주위 균열에 대한 평가가 요구되고 있다. 유도 초음파의 일종인 Lamb파는 판형상의 구조물의 비파괴 평가에 적합하며, 신경회로망은 비파괴 평가 기술에서 결합의 크기 및 종류 인식에 관하여 가장 효율적인 기법으로 많은 연구자들에 의해 적용되어 왔다. 본 연구에서는 항공기의 스킨재료로 적용되는 A12024-T3판재에 대하여 유도초음파의 일종인 판파를 적용하여 리벳홀 주위 균열 신호를 검출하였으며, 또한 리벳홀 주위 균열의 크기 평가를 위하여 백프로퍼게이션 알고리즘을 적용한 신경회로망을 적용하였다. 이때, 초음파 트랜스듀서와 시험편 사이의 불균일 접촉에 의한 오차를 줄이기 위하여 초음파 파형에서 시간 및 주파수 성분의 특성을 추출하여 신경회로망에 적용하였다. 그리고 이들 판파신호에서 추출한 시간 및 주파수 성분의 특성은 균열 크기 결정에 유용하게 적용될 수 있음을 증명하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1995년도 가을 학술발표회 논문집
• /
• pp.15.2-22
• /
• 1995

Evaluating stiffness of near-surface materials has been one of the critically important tasks in many civil engineering works. It is the main goal of geotechnical characterization. The so-called deflection-response method evaluates the stiffness by measuring stress-strain behavior of the materials caused by static or dynamic load. This method, however, evaluates the overall stiffness and the stiffness variation with depth cannot be obtained. Furthermore, evaluation of a large-area geotechnical site by this method can be time-consuming, expensive, and damaging to many surface points of the site. Wave-propagation method, on the other hand, measures seismic velocities at different depths and stiffness profile (stiffness change with depth) can be obtained from the measured velocity data. The stiffness profile is often expressed by shear-wave (S-wave) velocity change with depth because S-wave velocity is proportional to the shear modulus. that is a direct indicator of stiffiiess. The crosshole and downhole method measures the seismic velocity by placing sources and receivers (geophones) at different depths in a borehole. Requirement of borehole installation makes this method also time-consuming, expensive, and damaging to the sites. Spectral-Analysis-of-Surface-Waves (SASW) method places both source and receivers at the surface, and records horizontally-propagating surface waves. Based upon the theory of surfacewave dispersion, the seismic velocities at different depths are calculated by analyzing the recorded surface-wave data. This method can be nondestructive to the sites. However, because only two receivers are used, the method requires multiple measurements with different field setups and, therefore, the method often becomes time-consuming and labor-intensive. Furthermore. the inclusion of noise wavefields cannot be handled properly, and this may cause the results by this method inaccurate. When multi-channel recording method is employed during the measurement of surface-waves, there are several benefits. First, usually single measurement is enough because multiple number (twelve or more) of receivers are used. Second, noise inclusion can be detected by coherency checking on the multi-channel data and handled properly so that it does not decrease the accuracy of the result. Third, various kinds of multi-channel processing techniques can be applied to f1lter unwanted noise wavefields and also to analyze the surface-wavefields more accurately and efficiently. In this way, the accuracy of the result by the method can be significantly improved. Fourth, the entire system of source, receivers, and recording-processing device can be tied into one unit, and the unit can be pulled by a small vehicle, making the survey speed very fast. In all these senses, multi-channel recording of surface waves is best suited for a routine method for geotechnical characterization in most of civil engineering works.

• 대한조선학회논문집
• /
• 제32권1호
• /
• pp.118-131
• /
• 1995

수중폭발을 받게 되는 해군 함정이나 충격하중을 받게 되는 초고속선의 구조에 대한 내충격 파손해석을 거시해석(global or macro analysis)과 미시해석(fine or micro analysis)의 두 단계로 나누어 수행하였다. 거시해석은 이중근사기법(DAA : Doubly Asymptotic Approximation)을 이용하였다. 심한 충격하중을 받는 구조는 주로 세 가지 파괴모드를 나타내는데 이는 충격후기에 주로 나타나는 동소성좌굴(Dynamic plastic buckling)에 기인하는 소성대변형과 충격초기에 주로 나타나는 인장 파괴(Tensile tearing failure)와 횡전단파괴(Transverse shear failure)가 있다. 본 논문의 미시해석에서는 잠수구조의 종보강재에 충격압력이 가해진 경우에 대하여 응력파(stress wave)의 파급과 이 응력파와 균열과의 상호작용에 의한 동적응력강도계수 $K_I(t)$의 계산함으로써 인장 파괴모드(Tensile tearing failure mode)해석을 수행하였다. 특히, 동적응력강도계수 $K_I(t)$의 계산에 있어서 실험적 방법으로 널리 사용되는 shadow optical method of caustic로부터 개발된 numerical caustic method를 사용하였다. 본 논문의 충격파손해석 수치 예로서 해석모델을 완전잠수주상체로 잡고 거시해석을 수행한 후 이로부터 구한 충격압력을 입력자료로 하여 종보강재에 대하여 미시해석을 수행하였다.

• 비파괴검사학회지
• /
• 제23권2호
• /
• pp.89-97
• /
• 2003

본 논문은 탄성파를 이용한 비파괴검사 방법 중에 하나인 충격반향기법에 의하여 현장타설 말뚝기초의 선단 조건을 평가하는 연구로, 실내실험 및 현장실험을 수행하였다. 말뚝 선단 조건 평가를 위하여 직경 6cm, 길이 2m인 시멘트 모르타르 모형말뚝을 제작하였으며, 선단 조건은 자유단 조건, 고정단 조건, 암반근입 조건, 그리고 연약 선단 조건의 네 가지로 구분하였고 연약 선단 조건은 다시 말뚝과 주위 지반과의 접착 상태가 양호한 경우와 불량한 경우로 나누어 실내실험을 실시하였다. 실내실험 결과 탄성파 전파방법에 의하여 말뚝 선단 조건 가운데 자유단 조건, 고정단 조건 및 암반근입 조건을 각각 구별, 평가할 수 있었다. 또한 암반에 근입되어 있는 깊이도 정확히 산정할 수 있었으며, 말뚝과 주위 지반과의 접착상태가 불량한 경우의 연약 선단도 탐지할 수 있었다. 탄성파 전파방법의 현장 적용성을 평가하기 위하여 국내 현장에 건설되어 있는 현장타설 말뚝기초에 대하여 현장실험을 수행한 결과, 탄성파 전파방법에 의하여 현장타설 말뚝기초의 선단 조건 평가가 가능함을 확인하였다.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.91-105
• /
• 2016

One of the most commonly used techniques to strengthen steel reinforced concrete structures is the application of externally bonded patches in the form of carbon fiber reinforced polymers (CFRP) or recently, textile reinforced cements (TRC). These external patches undertake the tensile stress of bending constraining concrete cracking. Development of full-field inspection methodologies for fracture monitoring are important since the reinforcing layers are not transparent, hindering visual observation of the material condition underneath. In the present study acoustic emission (AE) and digital image correlation (DIC) are applied during four-point bending tests of large beams to follow the damage accumulation. AE helps to determine the onset of fracture as well as the different damage mechanisms through the registered shifts in AE rate, location of active sources and change in waveform parameters. The effect of wave propagation distance, which in large components and in-situ can well mask the original information as emitted by the fracture incidents is also discussed. Simultaneously, crucial information is supplied by DIC concerning the moments of stress release of the patches due to debonding, benchmarking the trends monitored by AE. From the point of view of mechanics, conclusions on the reinforcing contribution of the different repair methodologies are also drawn.

• 화약ㆍ발파
• /
• 제39권2호
• /
• pp.1-14
• /
• 2021

최근에는 GPGPU(General-Purpose computing on Graphics Processing Units)와 같은 고성능 연산장치의 보급과 함께 국방, 우주항공분야에서 암질재료에 대한 충격실험을 대신할 수 있는 3차원 동적해석기법의 개발이 활발하게 진행되고 있다. 그러나 높은 충격하중을 수반하는 암 발파 또는 소형미사일 등의 지중 관통과 같은 과정을 실험적으로 관찰하거나 계측하는 것은 암질재료의 비 균질성 및 불투명성 때문에 어려움이 있었다. 본 연구에서는 고속충돌에 의한 암석의 파괴 거동을 모사하기 위하여 3차원 동적 파괴 과정 해석 기법 (3D-DFPA)를 개발하였으며, 연산속도를 향상시키기 위하여 순차해석(explicity analysis) 및 접촉요소검색(Searching algolitm of contact elements)에 GPGPU연산이 가능한 알고리듬을 적용하였다. 제안된 동적파괴과정해석 기법에 대한 검증을 위해 Straight Notched Disk Bending (SNDB) 석회암시료에 대한 동적파괴인성시험을 모사하였고, 충격응력파의 전파과정, 암석-충격봉 경계면에서 반사 및 전달과정, 암석 시료의 파괴과정을 비교분석하여, 개발된 해석기법에 대한 검증을 수행하였다.