• Bulletin of the Society of Naval Architects of Korea
• /
• v.6 no.2
• /
• pp.5-10
• /
• 1969

A stepped bar with seimi-circular stress relieving groove near the fillet was subjected by axial tension in a polarized light field. On the stress concentration factor, the effect of the ratios of the fillet radius, the distance between two relieving grooves and the groove radius to the breath of the narrower portion of the stepped bar have been investigate. Observing the stress concentration in 48 models with various proportions, the conclusion arrived at were as follow: 1) If the fillet radius of the stepped bar is larger than half breadth of the narrower portion, the reduction of the stress concentrations can not be expected. 2) If the fillet radius is smaller than half breadth of the narrower portion of the stepped bar, the stress concentration can be droped to the reasonable range. 3) When the groove radius is larger than a quarter of the difference between the distance of two relieving grooves and the breadth of the stepped bar and smaller than a half of that, the stress concentration factors can have their possible minimum value. 4) When the sun of the breadth of the narrower portion of the stepped bar and twice of the relieving groove radius is smaller than the distance between two relieving grooves, minimum stress concentration can be obtained.

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.3
• /
• pp.144-151
• /
• 1993

For the purpose of studying the influence of stress relieving on microstructures and mechanical properties of weld metal, manual arc welding, onepole and twopole submerged arc welding were accomplished on $60kg/mm^2$ quenched and tempered high strength steel. After stress relieving, a lot of carbides were precipitated, developed and subsequently coarsened at the grain boundaries and within matrix due tn multiple tempering effect in manual arc welding, resulting in deterioated toughness. Meanwhile pearlite and cementite films were spheroidized and shortened in submerged arc welding, resulting in improved considerable toughness. It was observed that main effect of stress relieving was to reduce solut supersaturation by nucleation and growth of carbide precipitates, and stress relieving led to some reduction in the yield and tensile strenath but did not significantly affect elongation.

• Journal of Welding and Joining
• /
• v.22 no.2
• /
• pp.51-58
• /
• 2004

Residual stresses, which can be produced during the welding process, play an important role in an industrial field. Welding residual stresses are exerting negative effect on the fatigue behavior and integrity of structure. In this study, as a result of the thermal elasto-plastic finite element analysis for the welds of a nuclear component, the residual stress distributions are estimated for as-welded condition. Also, finite element techniques are developed to simulate the relaxation of the residual stresses according to the various mechanical stress relieving(MSR) loads such as hydrostatic pressure loading, tensile pipe-end loading, and mechanical stress improvement process(MSIP) loading. Finally, the results of residual stress redistributions for various loading conditions are compared and reviewed qualitatively and quantitatively to find an optimum loading condition.

• Journal of Welding and Joining
• /
• v.14 no.1
• /
• pp.75-81
• /
• 1996

The heat transfer and thermal stress-distribution were numerically determined by using the finite element method for a butt-welded pipe. A mechanical stress relieving(MSR) treatment which has been frequently used in the fabrication of pressure vessels instead of the post weld heat treatment (PWHT) was also simulated to investigate its effect of reducing the residual stress in the welded zone by a mechanical loading.

• Journal of People, Plants, and Environment
• /
• v.24 no.1
• /
• pp.63-73
• /
• 2021

Background and objective: This study was conducted to investigate the effects and preferences of horticultural therapy programs for stress relief according to MBTI personality types (Judging and Perceiving types) of female undergraduate students. Methods: The participants were divided into 15 Judging and 15 Perceiving types based on lifestyle preferences of the MBTI personality test, and a total of 30 participants participated in the horticultural therapy programs for 6 sessions. Results: Both Judging and Perceiving types showed a significant decrease in stress after participating in the horticultural therapy programs. Among the 8 life stress subfactors, Judging types showed significant stress relieving effects in 5 subfactors (relationship with the opposite sex, relationship with family, economic problems, future problems, value problems), while Perceiving types showed stress relieving effects in only 3 subfactors (relationship with family, economic problems, future problems). However, the changes in stress relief of 8 subfactors were not significantly different between the two personality types. The most preferred program for the Judging types was 'Making a flower basket', while the most preferred ones for the Perceiving types were 'Planting monstera', and 'Making preserved lemons with marigold', suggesting that the preferences varied depending on personality types. Conclusion: Therefore, it is necessary to develop suitable horticultural therapy programs for different subjects based on their personality types to enhance the effect of the programs on the subjects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2097-2107
• /
• 1996

The dynamic photoelastic technique had been utilized to investigate the possibillity of relieving the large local singular stresses induced at the corner of a right- angle- indenter. The indenter compressed a semi-infinite body dynamically with an impact load applied on the top of the indenter. The effects of the geometric changes of the indenter in terms of the diameter (d) and the location (1) of the stress relieving notch on the behavior of the dynamic contact stresses were investigated. The influence of stress relieving notches positioned along the edge of the semi-infinite body on the dynamic contact stresses were also studied by changing the diameter (D) and the location (L) of the notch. A multi-speak-high speed camera with twelve sparks were used to take photographs of full field dynamic isochromatic fringe patterns. The contact singular stresses were found to be released significantly by the stress relief notches both along the indenter and the edge of the semi-infinite body. The optimal position and geometry of the stress relieving notches were obtained with the aid of limited experimental results.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.101-112
• /
• 2011

As the society has become maturer, stress has emerged as a hot social issue. In this paper, we proposed the design and implementation of a customized contents service system for relieving users' stress. In the proposed system, we compute the stress index from a user's biometics and psychology, and recommend a combination of video, sound, aroma, and lighting based on the index and user's data such as preferences, and provide the recommended contents service. We first classify symptoms of stress and then define a tool for self assessment. We classify video, sound, aroma, and lighting contents as well according to the defined symptoms. We propose 3-phase customized recommender and service model for customized contents service. We design and implement a customized contents service system for relieving users' stress. Different from existing systems, this proposed system has an individually-customized system and provides a diverse combination of different content's types.

• Safety and Health at Work
• /
• v.6 no.4
• /
• pp.338-344
• /
• 2015

Background: The present study aims to investigate job stressors and stress relievers for Korean emotional laborers, specifically focusing on the effects of work conditions and emotional labor properties. Emotional laborers are asked to hide or distort their real emotions in their interaction with clients. They are exposed to high levels of stress in the emotional labor process, which leads to serious mental health risks including burnout, depression, and even suicide impulse. Exploring job stressors and relieving factors would be the first step in seeking alternatives to protect emotional laborers from those mental health risks. Methods: Using the third wave data of Korean Working Conditions Survey, logistic regression analysis was conducted for two purposes: to examine the relations of emotional labor and stress, and to find out job stressors and relievers for emotional laborers. Results: The chances of stress arousal are 3.5 times higher for emotional laborers; emotional laborers experience double risk-burden for stress arousal. In addition to general job stressors, emotional laborers need to bear burdens related to emotional labor properties. The effect of social support at the workplace is not significant for stress relief, unlike common assumptions, whereas subjective satisfaction (wage satisfaction and work-life balance) is proven to have relieving effects on emotional laborers' job stress. Conclusion: From the results, the importance of a balanced understanding of emotional labor for establishing effective policies for emotional laborer protection is stressed.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.192-195
• /
• 1995

• Proceedings of the KWS Conference
• /
• 1997.10a
• /
• pp.55-58
• /
• 1997