• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.363-368
• /
• 2024

Steel structures used in marine environments, such as ships, offshore structures or sub-structures in wind power generation facilities are prone to corrosion. In this study, the corrosion fatigue crack propagation characteristics due to the environmental load are examined by experiment at -1050 mV vs. SCE, which is equivalent to the anti-corrosion potential of zinc anodes that are widely used as sacrificial anodes. In this study, for this purpose, an experimental study is conducted on the effect of cathodic protection on the propagation of fatigue cracks in the seawater environment under the condition of -1050 mV vs. SCE, considering the wave period in synthetic seawater. Cathodic protection prevents corrosion; however, excessive protection generates hydrogen through chemical reactions as well as calcareous deposits. The fatigue crack propagation rate appeared to be faster than the rate in a seawater corrosion environment at the early stages of the experiment. As the crack length and stress intensity factor K increased, the crack propagation rate became slower than the fatigue crack propagation rate in seawater. However, the crack growth rate was faster than that in the atmosphere.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.3
• /
• pp.155-165
• /
• 2024

A hybrid thin film was prepared by doping reduced graphene oxide (rGO) into a sol-gel solution mixed with aluminum, titanium, and strontium using a brush coating method. The annealing temperature was carried out at 160, 260, and 360℃, and the difference in oxidation reaction was observed. The sol-gel solution created during the membrane manufacturing process generates a contractile force due to the shear stress of the brush bristles, forming a microgroove structure. This structure was confirmed through scanning electron microscopy analysis, and the presence of rGO was clearly revealed. As the annealing temperature increases, the oxidation and reduction reactions on the thin film surface become more active, so the intensity of the surface mixture increases. Moreover, the electro-optical properties were stabilized and improved by increasing the intensity of the mixtures. Likewise, the voltage-capacitance values are also significantly improved. Lastly, the transmittance measurement showed that it was suitable for liquid crystal display application.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.4
• /
• pp.127-135
• /
• 2006

In this study, steel deck bridges are chosen as analytic model to show the structural behaviors generated by high temperature of pavement and to formulate the simplified approximate analysis of thermal effects. In general, the thermal effect is changed by the material property of pavements and environmental temperature as well as shape, size and boundary conditions of bridge. Specially, this effect is the representative initial stress problem dependent on time. The thermal effect, however, does not depend on time and thermal effect is regarded as initial load in this study. After these thermal loading is modelled as moving loads, influence lines of reactions of shoes are calculated and the successive pavement steps with arbitrary segments are determined to minimize the thermal effect of shoes by influence line.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2004.06a
• /
• pp.60-61
• /
• 2004

Metabolic engineering is now a well established discipline, used extensively to determine and execute rational strategies of strain development to improve the performance of micro-organisms employed in industrial fermentations. The basic principle of this approach is that performance of the microbial catalyst should be adequately characterised metabolically so as to clearlyidentify the metabolic network constraints, thereby identifying the most probable targets for genetic engineering and the extent to which improvements can be realistically achieved. In order to harness correctly this potential, it is clear that the physiological analysis of each strain studied needs to be undertaken under conditions as close as possible to the physico-chemical environment in which the strain evolves within the full-scale process. Furthermore, this analysis needs to be undertaken throughoutthe entire fermentation so as to take into account the changing environment in an essentially dynamic situation in which metabolic stress is accentuated by the microbial activity itself, leading to increasingly important stress response at a metabolic level. All too often these industrial fermentation constraints are overlooked, leading to identification of targets whose validity within the industrial context is at best limited. Thus the conceptual error is linked to experimental design rather than inadequate methodology. New tools are becoming available which open up new possibilities in metabolic engineering and the characterisation of complex metabolic networks. Traditionally metabolic analysis was targeted towards pre-identified genes and their corresponding enzymatic activities within pre-selected metabolic pathways. Those pathways not included at the onset were intrinsically removed from the network giving a fundamentally localised vision of pathway functionality. New tools from genome research extend this reductive approach so as to include the global characteristics of a given biological model which can now be seen as an integrated functional unit rather than a specific sub-group of biochemical reactions, thereby facilitating the resolution of complexnetworks whose exact composition cannot be estimated at the onset. This global overview of whole cell physiology enables new targets to be identified which would classically not have been suspected previously. Of course, as with all powerful analytical tools, post-genomic technology must be used carefully so as to avoid expensive errors. This is not always the case and the data obtained need to be examined carefully to avoid embarking on the study of artefacts due to poor understanding of cell biology. These basic developments and the underlying concepts will be illustrated with examples from the author's laboratory concerning the industrial production of commodity chemicals using a number of industrially important bacteria. The different levels of possibleinvestigation and the extent to which the data can be extrapolated will be highlighted together with the extent to which realistic yield targets can be attained. Genetic engineering strategies and the performance of the resulting strains will be examined within the context of the prevailing experimental conditions encountered in the industrial fermentor. Examples used will include the production of amino acids, vitamins and polysaccharides. In each case metabolic constraints can be identified and the extent to which performance can be enhanced predicted

• Microbiology and Biotechnology Letters
• /
• v.32 no.4
• /
• pp.297-306
• /
• 2004

Heat shock proteins (HSPs) were induced in cells in the thermal stress, and the HSP90 family is one of the major classes of HSPs. Gene encoding HSPs have been characterized from various mammals and piscine. We have cloned and sequenced the HSP90 cDNA from a brain cDNA library constructed from flounder (Paralichthys oliThe result of sequence analysis shows it to be the HSP90~. The nucleotide sequence of the HSP90$\beta$ was composed of 2791 long, encoding 726 amino acid residues. The flounder hsp90$\beta$ gene showed very high sequence homology with hsp90f3 of European sea bass (96.6%), zebrafish (92.9%), Atlantic salmon (92.0%) and human (89.5%). We also constructed a phylogenetic tree based on HSP90 amino acid sequences from vertebrate species. Gene-specific primers were selected and used in RT-PCR reactions to measure the basal hsp90$\beta$ mRNA. The hsp90f3 gene is constitutively expressed at a fairly high level in all examined tissues (brain, liver, kidney, muscle, and spleen). In order to express protein of flounder hsp90$\beta$ in E. coli, we used the His-tagged pETvector. Then, the expression of flounder HSP90$\beta$ was confirmed by Western blot analysis.

• Korean Journal of Materials Research
• /
• v.10 no.2
• /
• pp.111-116
• /
• 2000

Fracture mode and carbide reactions of cast alloy 738LC during thermal exposure and creep at 816$^{\circ}C$/440MPa and 982$^{\circ}C$/152MPa were investigated. Crystallographic transgranular failure was observed in the specimen crept at 816$^{\circ}C$ due to shearing on the slip plane. Because selective oxidation at the grainboundaries which was exposed at the surface leads reduction in surface energy, however, early initiation of crack at the grainboundaries and intergranular failure were observed in the specimen crept at 982$^{\circ}C$/152MPa. As a result of decomposition of MC carbide at the tested temperatures, M(sub)23C(sub)6 carbide precipitated either on the grainboundaries or on the deformation band. The applied stress enhanced decomposition of MC. $\sigma$phase nucleated from Cr(sub)23C(sub)6 then grew to the ${\gamma}$+${\gamma}$\\` matrix. Precipitation of $\sigma$was accelerated by increasing temperature and applied stress.

• Korean Journal of Acupuncture
• /
• v.22 no.4
• /
• pp.57-65
• /
• 2005

Objectives : Circium japonicum is a pharmacologically active used in traditional Korean medicine. An aqua-acupuncture solution of the Circium japonicum was assessed to determine the mechanism of its antioxidant activity. Materials : Circium japonicum was obtained from a Dongguk Korean Medicine Hospital (Kyung-ju, Kyungbuk). The freeze-dry powder was collected (yield 5.1%) for the aqua-acupuncture solution. Scavenging activity on DPPH free radicals by the Circium japonicum aqua-acupuncture solution (CJAS) was assessed according to the method followed by Gyamfi et al.. and then scavenging activity orl superoxide radicals $(O_2^-{\cdot})$ was assessed by the method described by Gotoh et al. with slight modification. Deoxyribose assay to determine the rate constant for the reactions between either antioxidants and hydroxyl radicals or antioxidants and iron ions. We tested by; (1) Non-site-specific scavenging assay (hydroxyl radicals, OH), (2) Site-specific scavenging assay (chelate iron ions), and (3) Pro-oxidant effect of the CJAS on iron dependent hydroxyl radical generation. Finally, we determined hydroxyl radical-mediated DNA nicking formation. Conclusion : Our study demonstrated that CJAS has antioxidant activities and we investigated the potential effectiveness of CJAS in preventing oxidative stress-mediated disease further.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.5
• /
• pp.644-651
• /
• 2022

The skin is the largest organ of the human body and protects the inside of the body. Ultraviolet rays cause various inflammatory reactions in the skin, including photoaging and oxidative damage. The purpose of this study is to investigate the protective effect of Saponaria extract by irradiating UVB on fibroblasts. In this study, the effectiveness of Saponaria showing protective activity against UVB-induced cytotoxicity, oxidative cell death, and NO and PGE₂ production was evaluated. HS68 cells were irradiated with UVB(120 mJ/cm²) and treated with Saponaria extract at various concentrations of 100, 200, and 400 ㎍/mL for 24 hours. Intracellular reactive oxygen species (ROS) generated by ultraviolet B were detected using a spectrofluorometer after DCF-DA staining. Lipid peroxidation was also analyzed by measuring the level of 8-isoprostane secreted into the culture medium. As a result, treatment with Saponaria extract effectively inhibited UVB-induced cytotoxicity. Oxidative cell damage was mediated by PGE₂ in UVB-induced HS68 fibroblasts, which was significantly inhibited by Saponaria extract treatment. In addition, it was evaluated that the protective effect of these extracts was mediated by the inhibition of intracellular ROS production and lipid peroxidation in a concentration-dependent manner. These results suggest that Saponaria extract can be used as an anti-aging functional material because it inhibits skin damage mediated by oxidative stress caused by UVB and exhibits a cellular protective effect.

• Journal of Life Science
• /
• v.31 no.9
• /
• pp.818-826
• /
• 2021

5-Aminolevulinic acid phosphate (5-ALA-p) is a substance obtained by eluting 5-ALA (a natural delta amino acid) with aqueous ammonia, adding phosphoric acid to the eluate, and then adding acetone to confer properties suitable for use in photodynamic therapy applications. However, its pharmacological efficacy, including potential mechanisms of antioxidant and anti-inflammatory reactions, remains unclear. This study aimed to investigate the effects of 5-ALA-p on oxidative and inflammatory stresses in lipopolysaccharide (LPS)-stimulated RAW 264.7 cells. Our data showed that 5-ALA-p significantly inhibited excessive phagocytic activity via LPS and attenuated oxidative stress in LPS-treated RAW 264.7 cells. Furthermore, 5-ALA-p improved mitochondrial biogenesis reduced by LPS, suggesting that 5-ALA-p restores mitochondrial damage caused by LPS. Additionally, 5-ALA-p significantly suppressed the release of nitric oxide (NO) and pro-inflammatory cytokines, such as tumor necrosis factor α (TNF-α), interleukin (IL)-1β, and IL-6, which are associated with the inhibition of inducible NO synthase and respective cytokine expression. Furthermore, 5-ALA-p reduced the nuclear translocation of nuclear factor-kappa B (NF-κB) and inhibited phosphorylation of mitogen-activated protein kinases (MAPKs), indicating that the anti-inflammatory effect of 5-ALA-p is mediated through the suppression of NF-κB and MAPK signaling pathways. Based on these results, 5-ALA-p may serve as a potential candidate to reduce inflammation and oxidative stress.

• Journal of Korean Academy of Nursing
• /
• v.28 no.2
• /
• pp.403-413
• /
• 1998

The Resilience is described as the personal capacity which brings psychosocial comeback. The role of nursing is to do its best to rehabilitate patients and to explore the individual in order to promote patients psychosocial change. However, as the current nursing is heavily physical nursing oriented, the identity of the nursing would be lost. Therefore this researcher reviewed if the concept of resilience can be applied to the nursing after examing the concept of resilience by Documents and Fieldwork. The methodology of this research is Hybrid Model developed by Schwartz-Barcott and Kim for the concept development and analysis. The process and procedure consist of The Theoretical Phase, The Fieldwork Phase and The Final Analytical Phase in accodance with the Hybrid Model. The followings the summary of the Research. 1. The Concept of Resilience Finally Analyzed by Documents and Fieldwork (1) The Redefinition of Resilience The resilience is the latent psychosocial capacity which minimize the negative emotion and promote the adaptation under adversity. Resilience appears as cognitive, emotional and behavioral response in the course of changing from negative response to positive response through the interaction of the individual and the enviroments in a given time. Resilience changes and decreases according to time and situation and it can be nurtured. Resilience is the higher concept including hardiness, sense of coherence and self-strength which maintain the health under stress. (2) The Attribute of Resilience The attribute of resilience was devided into psychological and social dimension. In psychological attributes, there are admittion of reality of situation, denial of negative emotion, desire to live, responsibility, confidence, courage, hope, pursuit of positive meaning, identification and pursuit of goal, self-esteem, reception, spontaneity, planning, positiveness, will power, flexibility and creativity. In social attributes, there are a sense of belonging, perception of social support and active social relations. (3) The Process of Resilience There are 4 resilience phases which were the process minimizing the possibility of the negative chain reactions under adversity, the process minimizing the negative emotion under adversity, the process gaining the desire to live and the process exposing the active social relations. 2. The Application Possibility of Resilience Concept to Nursing The resilience concept is the psychosocial capacity with which an individual manages adversity. As many nursing scientists have developed nursing theory based on this capacity and the identification of nursing has been established in this field, resilience is not the new conception in nursing. However, since resilience appears in the attributes related with the resilience process concretely, it would help a lot when nurses execute psychosocial nursing.