• 한국강구조학회 논문집
• /
• 제23권2호
• /
• pp.169-177
• /
• 2011

본 논문은 반복하중을 받는 고강도강 원형강관의 T형 접합부의 면내 휨모멘트 내력에 대해 체계적으로 수행된 유한요소 해석으로부터 얻은 결과를 제시하고 있다. 용접된 원형강관의 T형 접합부의 회전강성 및 이에 따른 파괴모드를 분석하기 위하여 T형 접합부의 3차원 비선형 유한요소모델을 이용하였다. 주관과 지관의 세장비, 주관과 지관의 지름비와 같은 기하학적 파라미터 및 항복비 등에 따른 T형 접합부의 다양한 구조적 거동을 제시하였으며, 또한 주관의 압축응력의 크기에 따른 T형 접합부의 극한 면내 휨모멘트 내력의 변화를 분석하였다.

• 폴리머
• /
• 제24권3호
• /
• pp.342-349
• /
• 2000

아이소탁틱 폴리프로필렌과 대두유 시스템으로부터 열유도 상분리 및 연신공정에 의하여 중공사막을 제조하였다. 막의 구조와 성능에 관계되는 각종 조업변수들의 영향을 조사하였고 이들을 최적화하였다. 폴리프로필렌/대두유의 용융점도가 microfibril 형성에 영향을 미침을 확인하였고 기핵제를 첨가함에 따라 핵생성 밀도가 증가하여 연신에 의한 구정 간의 기공형성이 향상되었다. 막을 열처리함으로써 연신 시 유도되었던 stress를 이완시켜 막의 수축현상을 방지하여 다공도를 유지할 수 있었다. 기핵제를 첨가한 경우 고-액 상분리에 의하여 구조가 형성되며 응고조의 온도 변화에 따라 핵 생성 밀도가 변화하게 되고 이에 따라 연신에 의한 기공 형성이 영향을 받게 되었다. 기핵제를 첨가하지 않은 경우 핵 생성이 활발하지 않아서 주로 액-액 상분리 거동이 구조 형성에 영향을 미치게 되며 응고조 온도 변화에 따른 효과가 기핵제를 넣은 경우와는 반대의 경향을 나타내었다.

• 한국정밀공학회지
• /
• 제25권6호
• /
• pp.47-54
• /
• 2008

Fitting process carried out in the automobile transmission assembly line is classified into three classes; heat fitting, press fitting, and their combined fitting. Heat fitting is a method that heats gear to a suitable range under the tempering temperature and squeezes it toward the outer diameter of shaft. Its stress depends on the yield strength of gear. Press fitting is a method that generally squeezes gear toward that of shaft at room temperature by a press. Another method heats warmly gear and safely squeezes it toward that of shaft. Warm shrink fitting process for the automobile transmission part is now gradually increased, but the parts (shaft/gear) assembled by this process produced dimensional changes in both the outer diameter and profile of the gear. So that it may cause noise and vibration between gears. In order to solve these problems, we need an analysis of warm shrink fitting process, in which design parameters are involved; contact pressure according to fitting interference between outer diameter of shaft and inner diameter of gear, fitting temperature, and profile tolerance of gear. In this study, an closed form equation to predict contact pressure and fitting load was proposed in order to develop an optimization technique of the warm shrink fitting process and verified its reliability through the experimental results measured in the field and FEM, that is, thermal-structural coupled field analysis. Actual loads measured in the field was in good agreements with the results obtained by the theoretical and finite element analysis.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.337-342
• /
• 2014

The reduction of drag torque is an important research issue in terms of improving transmission efficiency. Drag torque in a wet clutch occurs because of the viscous drag generated by the transmission fluid in a narrow gap (clearance) between the friction plate and a separate plate. The objective of this paper is to observe the effects of the friction plate area and the clearance on the drag torque using finite element simulation. The two-phase flow of air and oil fluid is considered and modeled for the simulation. The simulation analysis reveals that as the rotational speed increases, the drag torque generally increases to a critical point and then decreases sharply at a high speed regime. The clearance between the two plates plays an important role in controlling drag torque peak. An increase in the clearance causes a decrease in shear stress; thus, the drag torque also decreases according to Newton's law of viscosity. An observation of the effect of the area of contact between transmission fluid and friction plate shows that the drag torque increases with the contact area. The flow vectors inside the flow channel present clear evidence that the velocity of the fluid flows is faster with a larger friction plate, that is, in the case of a larger contact area. Therefore, the optimum size of the friction plate should be determined carefully, considering both the clutch performance and drag reduction. It is expected that the results from this study can be very useful as a database for clutch design and to predict the drag torque for the initial design with respect to various clutch parameters.

• Journal of Welding and Joining
• /
• 제10권3호
• /
• pp.63-72
• /
• 1992

The joining methods of ceramics to metals which can be expected to obtain high temperature strength are mainly classified into the solid-state diffusion bonding method and the active brazing method. Between these two, the solid-state diffusion bonding method is given attentions as substituting method for active brazing method due to being capable of obtaining higher bonding strength at high temperature and accurate bonding. In this paper, the solid-state diffusion bonding of $Al_{2}$O$_{3}$ ceramics to Ni-Cr-Mo alloy steel (SNCM21) using insert metal was carried out. The insert metal employed in this study was experimentally home-made, Ag-Cu-Ti alloy. Influence of several bonding parameters of $Al_{2}$O$_{3}$SNCM21 joint was quantitatively evaluated by bonding strength test, and microstructural analyses at the interlayer were performed by SEM/EDX. From above experiments, the optimum bonding condition of the solid-state diffusion bonding of $Al_{2}$O$_{3}$/SNCM21 using Ag-Cu-Ti insert metal was determined. Futhermore, high temperature strength and thermal-shock properties of $Al_{2}$O$_{3}$/SNCM21 joint were also examined. The results obtained are as follows. 1. The maximum bonding strength was obtained at the temperature of 95% melting point of insert metal. 2. The high temperature strength of $Al_{2}$O$_{3}$/SNCM21 joint appeared to bemaximum value at test temperature 500.deg.C and the bonding strength with increasingtemperature showed parabolic curve. 3. The strength of thermal-shocked specimens was far deteriorated than those of as-bonded specimens. Especially, water-quenched specimen after heated up to 600.deg. C was directly fractured in quenching.

• 한국재료학회지
• /
• 제4권7호
• /
• pp.837-844
• /
• 1994

현재까지 잘 알려진 압출이론식이 생산현장에 응용될 수 있는가를 조사하기 위하여, Al-Si합금을 대상소재로 하여 각 압출이론식에 나타난 유도응력 $K_f$, 변형저항 $K_w$ , Dead Metal Zone(DMZ)의 경각($\alpha$)등을 측정하였으며, 이들 값을 이용하여 최대압출력을 계산하였다. 550ton의 압출기를 이용하여 측정한 최대 압출력과의 비교분석을 행하였으며, 그 결과 이론식에 의해 최대압출력을 계산하기 위해 측정된 유동응력 및 변형저항 값은 신뢰할 수 있을 것으로 사료되었는데, 이것은 0.5이하에서 결정된 변형효율 $\eta _f$로서 판단 할 수 있었다. 최대 압출력은 Si함량이 증가할 수록 증가하게 되나, 압출온도가 증가할 수록 감소하고 있음을 알 수 있었다. Siebel식으로부터 계산된 최대압출력은 본 실험을 통하여 얻어진 최대압출력에 비교적 근접하고 있으나. Geleji식으로부터 계산된 최대압출력은 DMZ의경각 $\alpha$가 $50^{\circ}$일 경우 , 본 실험에 의해 얻어진 실제의 최대압출력에 급접하고 있었다. Geleji의 식은 DMZ의 경각에 매우 민감하고, 대상재료마다. DMZ를 일일이 측정해야 하는 번거로움 때문에 생산현장에서는 Siebel의 식을 이용하는 것이 보다 편리할 것으로 사료된다.

• 동의생리병리학회지
• /
• 제21권3호
• /
• pp.626-633
• /
• 2007

To access the safety and efficacy of Chungyeoldodam-tang(CDT), a traditional herbal medicine prescription, on hypertension we examined various parameters involved in the pathogenesis of hypertension. CDT seems to be safe because CDT at the concentrations lower that 250 ug/ml showed no toxic effects in cultured human fibroblast and no toxic effects on liver function. The production of reactive oxygen species (ROS) were greatly decreased in CDT treated group compared with control, and angiotensin converting enzyme activities were reduced by CDT in a dose dependent manner. There was no differences in weight of hearts between control and CDT treated group. The blood pressure and pulse rate were significantly decreased. CDT greatly reduced the levels of plasma hormones including aldosterone, dopamine, and norepinephrine, but not epinephrine, and serum electrocytes including Na$^+$ and Cl$^-$, but not K$^+$. were also decreased. The levels of uric acid, BUN and creatinine were significantly decreased compared with control. These results suggested that CDT has suppressive effects on various pathologic factors in hypertension, and CDT has potential as a safe and effective therapeutics for hypertension.

• 대한기계학회논문집A
• /
• 제28권2호
• /
• pp.174-180
• /
• 2004

If Fiber Reinforced Metal Laminates(FRMLs) were delaminated, the decrease of stiffness and fiber bridging effect would result in the sudden aggravation of fatigue characteristics. It was reported that the delamination of FRMLs resulted from the crack of metal layers and that it depended on the crack growth. While cracks were made in FRMLs containing a saw-cuts under fatigue loading, cracks could be produced or not in FRMLs with circular holes under the same condition. When the FRMLs with the circular holes produce not the crack but the delamination, it is not possible to analyze it by the conventional fracture parameters expressed as the function of the crack. And so, this research suggests a new analytical model of the delamination to make the comparison of the delamination behavior possible whenever the cracks occur or not. Therefore, a new analytical model called Pseudo Crack Model(PCM) was suggested to compare the delaminations whether cracks were made or not. The relationship between the crack energy consumption rate( $E_{crack}$) and the delamination energy consumption rate( $E_{del}$) was discussed and it was also known that the effect of $E_{del}$ was larger than that of $E_{crack}$.

• Journal of Nutrition and Health
• /
• 제51권1호
• /
• pp.1-13
• /
• 2018

Purpose: This review article provides an overview of the trends of research papers on the health benefits of kimchi and kimchi lactic acid bacteria published from 1995 to 2017. Methods: All publications from 1995 to 2017 regarding kimchi and kimchi lactic acid bacteria were collected, reviewed, and classified. This review article covers the publications of the health benefits of kimchi and kimchi lactic acid bacteria on experimental, clinical trials, and epidemiology studies. Results: The number of publications on kimchi over the period were 590: 385 publications in Korean and 205 publications in English. The number of publications on the health benefits of kimchi and kimchi lactic acid bacteria were 95 in Korean and 54 in English. The number of publications on kimchi and kimchi lactic acid bacteria were 84 and 38, respectively, in the experimental models. Ten research papers on kimchi in clinical trials and 7 publications in epidemiology were found. Kimchi or kimchi lactic acid bacteria had protective effects against oxidative stress, mutagenicity, toxicity, cancer, dyslipidemia, hypertension, immunity, and inflammation in in vitro, cellular, and in vivo animal models. Moreover, kimchi had effects on the serum lipids, intestinal microbiota, iron status, obesity, and metabolic parameters in human clinical trials. In epidemiology, kimchi had effects on hypertension, asthma, atopic dermatitis, rhinitis, cholesterol levels, and free radicals. Conclusion: This review focused on the publications regarding the health benefits of kimchi and kimchi lactic acid bacteria, suggesting the future directions of studies about kimchi and kimchi lactic acid bacteria by producing a database for an evaluation of the health benefits of kimchi.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.189-213
• /
• 2020

Stainless-clad (SC) bimetallic steels that are manufactured by metallurgically bonding stainless steels as cladding metal and conventional mild steels as substrate metal, are kind of advanced steel plate products. Such advanced composite steels are gaining increasingly widespread usage in a range of engineering structures and have great potential to be used extensively for large civil and building infrastructures. Unfortunately, research work on the SC bimetallic steels from material level to structural design level for the applications in structural engineering field is very limited. Therefore, the aim of this paper is to investigate the material behaviour of the SC bimetallic steels under the cyclic loading which structural steels usually could encounter in seismic scenario. A number of SC bimetallic steel coupon specimens are tested under monotonic and cyclic loadings. The experimental monotonic and cyclic stress-strain curves of the SC bimetallic steels are obtained and analysed. The effects of the clad ratio that is defined as the ratio of the thickness of cladding layer to the total thickness of SC bimetallic steel plate on the monotonic and cyclic behaviour of the SC bimetallic steels are studied. Based on the experimental observations, a cyclic constitutive model with combined hardening criterion is recommended for numerical simulation of the cyclic behaviour of the SC bimetallic steels. The parameters of the constitutive model for the SC bimetallic steels with various clad ratios are calibrated. The research outcome presented in this paper may provide essential reference for further seismic analysis of structures fabricated from the SC bimetallic steels.