• 한국재료학회지
• /
• 제20권11호
• /
• pp.559-569
• /
• 2010

The liquid-phase sintering method was used to prepare a glass lens forming core composed of SiC-$Al_2O_3-Y_2O_3$. Spark plasma sintering was used to obtain dense sintered bodies. The sintering characteristics of different SiC sources and compositions of additives were studied. Results revealed that, owing to its initial larger surface area, $\alpha$-SiC offers sinterability that is superior to that of $\beta$-SiC. A maximum density of $3.32\;g/cm^3$ (theoretical density [TD] of 99.7%) was obtained in $\alpha$-SiC-10 wt% ($6Al_2O_3-4Y_2O_3$) sintered at $1850^{\circ}C$ without high-energy ball milling. The maximum hardness and compression stress of the sintered body reached 2870 Hv and 1110 MPa, respectively. The optimum ultra-precision machining parameters were a grinding speed of 1243 m/min, work spindle rotation rate of 100 rpm, feed rate of 0.5 mm/min, and depth of cut of $0.2\;{\mu}m$. The surface roughnesses of the thus prepared final products were Ra = 4.3 nm and Rt = 55.3 nm for the aspheric lens forming core and Ra = 4.4 nm and Rt = 41.9 for the spherical lens forming core. These values were found to be sufficiently low, and the cores showed good compatibility between SiC and the diamond-like carbon (DLC) coating material. Thus, these glass lens forming cores have great potential for application in the lens industry.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.33-33
• /
• 2001

The physical properties and the dyeability of the easily dyeable polyester yarn(EDY) were investigated and compared with those of regular polyester (REG-PET). The EDY, copolymerized with small amount of polyethylene glycol(PEG), showed higher intensity of aliphatic CH peak in IR spectrum, lower density and lower compactness than those of the REG-PET from the analysis of IR, density gradient column and XRD respectively. In the physical properties, the EDY has lowers $T_g,\;T_m$, specific stress and initial modulus, and also has higher strain than that of the REG-PET. The EDY can be dyed under atmospheric pressure and its dyeing rate was faster than REG-PET due to low $T_d$, and this seems to be caused by the increased flexibility of Polymer chain in amorphous region of the EDY due to the copolymerization of PEG.ns being within the experimental error, the average values of lifetim.
$\tau$(t) are taken for further calculations. Rate constants such as Stern-Volmer quenching constants K$_{sv}$, quenching rate parameters k$_q$ and k''$_q$, static quenching constant V and kinetic distance r are determined using the modified Stern-Volmer eq.
tion and sphere of action static quenching model. In order to see whether the reactions are diffusion limited, equations k$_q$ = e$^{-Eq/RT}$ and k''$_q$ = e$^{-Eq/RT}$ are used to determine the values of E$_q$ and E''$_q$, the activati.
energies for collisional quenching and the values of E$_q$ are 14.53, 17.28 and 16.20 kJ mole$^{-1}$ for MPNO1, MPNO2 and 2-PI respectively and the values of E''$_q$ are 14.62 and 17.73 for MPNO1 and MPNO2 respectively. From the magnitudes of various quantities it has.
een concluded that the reactions are diffusion limited and the observed positive deviations in the S-V plot are due to static and dynamic quenching.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.553-558
• /
• 2010

The behavior of composite piles composed of steel pipe pile in the upper part and concrete pile in the lower part by a mechanical splicing joint was examined by field lateral load tests and bending tests. A total of 7 piles including two instrumented piles for bending test were installed. The soil profile consists of soft clay with weak silt with shallow groundwater level. Laboratory tests were carried out to determine the basic soil characteristics and the strength parameters. This paper presents the composite pile behavior with various portions of the upper steel pile: 0, 20, 30, and 45% of the pile embedded pile length. Three-point bending tests were performed to investigate the stress-strain relation at the mechanical joint. Based on these test results, the behavior of composite piles with various upper steel pile length are evaluated and the stability of mechanical joints are examined. Through comparisons with results of field load tests, it was found that lateral load carrying capacity of the composite piles increased and deflections of the composite piles decreased with increasing the upper steel piles. The mechanical joint was proved to retain its structural stability against the tested load conditions. Economical benefits of composite pile of this kind can be gained by setting adequately the length of the upper steel pipe piles.

• 한국전산구조공학회논문집
• /
• 제23권5호
• /
• pp.483-491
• /
• 2010

본 논문에서는 점탄성 재료의 피로균열 성장을 분석하기 위해 ${\Delta}J$-적분을 이용하였다. J-적분의 계산 시 기존의 수치해석 방법이 아닌 해석적인 적분 해를 도출하여 계산시간을 절감하고 정확도를 크게 높였다. 계산 시 응력확대계수는 특정 균열에 대해 참조하는 방법이 아닌 유한요소해석을 통해 구하는 방법을 사용하였다. 기존의 ${\Delta}K$를 이용한 피로균열 예측과는 달리 크리프 변형계수, 단 두 개의 피로성장 모델 변수만을 가지고 다양한 하중과 하중주기에서의 피로균열 성장을 성공적으로 분석할 수 있었다.

• 한국가스학회지
• /
• 제9권4호
• /
• pp.36-43
• /
• 2005

본 논문은 다구찌 설계방법을 이용하여 LNG저장탱크의 지붕 구조물에 대한 최적설계 조건을 확보하기 위해 FEM해석을 수행하였다. 다구찌 설계방법은 저장탱크 구조물의 설계인자에 가장 큰 영향을 미치는 파라메터를 고찰하고 최적화하는데 유용한 결과를 제시하였다. 다구찌 설계방법으로 수행된 FEM 해석결과에 따르면, LNG저장탱크 지붕 구조물의 최적설계에 필요한 인자로 지붕 중심부의 두께를 언급하고 있다. 안전하면서 효율적인 지붕을 건설하기 위한 철근 콘크리트 지붕의 초기 구조물 설계는 반경방향의 H빔과 원주방향의 L빔을 가능한 작은 수량으로 배열하고 두꺼운 지붕 구조물을 갖춘 LNG 외부탱크가 최적이라는 해석결과를 제시한다.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.229-232
• /
• 2005

In this paper, an image-based "approach-align -grasp" visual servo control design is proposed for the problem of object grasping, which is based on the binocular stand-alone system. The basic idea consists of considering a vision system as a specific sensor dedicated a task and included in a control servo loop, and we perform automatic grasping follows the classical approach of splitting the task into preparation and execution stages. During the execution stage, once the image-based control modeling is established, the control task can be performed automatically. The proposed visual servoing control scheme ensures the convergence of the image-features to desired trajectories by using the Jacobian matrix, which is proved by the Lyapunov stability theory. And we also stress the importance of projective invariant object/gripper alignment. The alignment between two solids in 3-D projective space can be represented with view-invariant, more precisely; it can be easily mapped into an image set-point without any knowledge about the camera parameters. The main feature of this method is that the accuracy associated with the task to be performed is not affected by discrepancies between the Euclidean setups at preparation and at task execution stages. Then according to the projective alignment, the set point can be computed. The robot gripper will move to the desired position with the image-based control law. In this paper we adopt a constant Jacobian online. Such method describe herein integrate vision system, robotics and automatic control to achieve its goal, it overcomes disadvantages of discrepancies between the different Euclidean setups and proposes control law in binocular-stand vision case. The experimental simulation shows that such image-based approach is effective in performing the precise alignment between the robot end-effector and the object.

• 한국농림기상학회지
• /
• 제5권4호
• /
• pp.226-232
• /
• 2003

도심지 주요 대기 오염원 가운데 하나인 오존이 층층나무의 유전구조에 미치는 영향을 조사하기 위하여 오존 처리에 대해서 생장이 건강한 내성 그룹과 피해가 심한 감수성 그룹을 선발한 후 동위효소 분석에 의한 유전구조를 비교하였다. 두 그룹간 유전구조의 차이는 5개 다형적 유전자좌에서 관측된 대립유전자 빈도 및 유전자정 빈도의 비교에 의해서 이루어졌다. 분석 결과 3개 유전자좌(Lap-2, Mdh-1, Skdh-1)에서 두 그룹간에 통계적으로 유의한 차이가 관측되었다. 내성그룹의 경우 유전적 다수도, 유전적 다양도, 이형접합도 등 유전적 다양성을 추정하기 위한 모든 통계치에서 감수성 그룹에 비해 높은 값을 나타냈다. 본 연구 결과는 유전적으로 다양한 개체 또는 집단이 그렇지 않은 개체나 집단에 비해서 환경 스트레스에 대해 저항성이 크다는 일반적인 가설에 잘 부합하는 것으로 나타났다.

• Journal of Nutrition and Health
• /
• 제36권9호
• /
• pp.933-941
• /
• 2003

It has been suggested that green juice supplementation may have some health promoting benefits. We evaluated the effects of green juice (Angelica keiskei) consumption on parameters of lipid profiles and plasma antioxidant status in healthy male smokers. Fifty-four smokers were supplemented with 300 ml of green juice for 6 weeks while maintaining their normal diet. Blood samples were collected on week 0 and week 6 in order to evaluate plasma lipid profiles (total cholesterol, triglyceride, LDL-cholesterol, HDL-cholesterol) , plasma antioxidant vitamin levels (ascorbic acid, $\alpha$ -tocopherol, ${\gamma}$ -tocopherol, $\alpha$ -carotene, $\beta$ -carotene, cryptoxanthin and lycopene) , the degree of LDL oxidation and GOT, GPT levels for liver function. Plasma ascorbic acid level remained at the same level. However, $\alpha$ -tocopherol and ${\gamma}$ -tocopherol normalized by total cholesterol (p <0.05) and $\beta$ -carotene (p <0.001) level were all significantly increased after green juice supplementation. Plasma cholesterol was reduced for 12%, LDL-cholesterol was reduced for 9.3% after green juice consumption, while plasma triglyceride and HDL-cholesterol was not changed. Oxidized LDL assessed by conjugated diene (CD) , was decreased (p < 0.0001) after green juice consumption. These results further support a role for green juice supplementation in the improvement of lipid status, prevention of lipid peroxidation, and thereby reducing risk factors of numerous diseases associated with elevated oxidative stress in smokers.

• Nutrition Research and Practice
• /
• 제9권1호
• /
• pp.37-42
• /
• 2015

BACKGROUND/OBJECTIVES: Red grape seeds as functional food are a good source of important bioactive components such as phenolics and antioxidants, which decrease oxidative stress that contributes to the pathogenesis of hepatotoxicity. The current study was conducted in order to evaluate the protective effect of red grape dried seeds (RGDS) on antioxidant properties, lipid metabolism, and liver and kidney functions of rats with paracetamol (750 mg/kg) induced hepatotoxicity. MATERIALS/METHODS: RGDS was added to the basal diet at 5, 10, and 20%. Thirty five adult male rats were assigned to five groups (n = 7) for a six-week feeding period; group (1) normal control, group (2) induced control, groups (3, 4, and 5) fed a diet with RGPS at different levels, 5, 10, and 20%, respectively. At the end of the feeding period, animals' blood and tissues were collected for estimation of serum lipid profile, serum liver, and kidney biomarkers. The protection was measured by detecting lipid peroxidation (LPO), glutathione (GSH), superoxide dismutase (SOD), Catalase (CAT) (in liver tissues), and liver histological examination. RESULTS: The results showed a significant (P < 0.05) decrease in levels of serum cholesterol, triglycerides, low density lipoprotein (LDL-C), and very low density lipoprotein (VLDL-C), with a significant increase in level of high density lipoprotein (HDL-C) for RGDS groups compared to induced control. Rats administered a diet containing RGDS levels produced significant (P < 0.05) hepatoprotection by decreasing the activities of liver enzymes, kidney parameters, and lipid peroxidation, while levels of GSH, SOD, and CAT were increased significantly to near the normal levels. CONCLUSION: The RGDS 20% group was more effective than others against hepatotoxicity of paracetamol, which may be attributed to RGDS total phenols and antioxidant contents, which were 1.438 mg and 1.231 mg, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.334-408
• /
• 2006

In Hong Kong, large-diameter (${\ge}600mm$) bored piles and large-section excavated rectangular barrettes are commonly used to support tall buildings to resist both vertical and horizontal loads. These piles and barrettes penetrate through and may found in saprolitic soils and decomposed rocks. Generally, the design of these large bored piles and barrettes involves considerable amount of uncertainty and design parameters must usually be verified by field tests. In this paper, over 50 full-scale load tests on large-diameter bored piles and over 15 large-section of rectangular barrettes in Hong Kong are reviewed and interpreted critically, in particular the degree of mobilisation of side shear resistance using a mobilization rating (MR) factor and a displacement index (DI) for floating bored piles and barrettes and rock-socketed piles, respectively. The author was heavily involved with many of these load tests. The diameter of the bored piles tested ranges from 0.6m to 1.8m and the depth varies from 12m to 75m. Sizes of barrettes critically reviewed include $2.2m{\times}0.6m,\;2.2m{\times}0.8m,\;2.8m{\times}0.8m\;and\;2.8m{\times}1.0m$ (on plan) and the depth varies from 36m and 63m. Based on these field tests, a new failure load criterion for large-diameter bored piles and barrettes is developed and proposed. The side shear resistance of the bored piles and barrettes is quantitatively analyzed with respect to local displacements, standard penetration tests, unconfined compressive strength (UCS) for rock sockets and using the effective stress principle. In addition, the effects of construction including post-grouting, construction time, side scraping and excavation tools on side shear resistance are investigated and reported.