• Journal of Welding and Joining
• /
• v.19 no.6
• /
• pp.664-670
• /
• 2001

The HDM(Hole Drilling Method) is a relatively simple and accurate methods in measuring residual stress of weldment. Various method of evaluating residual stress are studied in welding field. The method of cutting holes on the plate much affects the accuracy of result. Especially for the hard material like stainless which is difficult to cut preciously is difficult to measure residual stress of weldment. Because heat conduction of strainless steel is lower than other general steel, the magnitude of residual stress might be different as to changing of welding conditions. Therefore, the distribution of residual stress on the STS304 steel after welding using HDM is evaluated in this paper.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.4 no.4
• /
• pp.50-60
• /
• 1995

Recently advantages joining dissimiliar materials and light weight material techniques have led to increasing use of structural adhesives in the various industries. Stress singulartiy occurs at the interface edges of adhesively bonded dissimilar materials. So it is required to analyze its stress singularity at the interface edges of adhesively bonded joints indissimilar materials. In this paper, the analysis method of stress singularity is studied in detail. Also, effects of the stress singularity at the interface edge of adhesively bonded scarf joints in combinations of dissimilar materials are investigated by using 2-dimensional elastic program of boundary element method. As the results, the strength evaluation method of adhesively bonded dissimilar materials using the stress singularity factor, $\Gamma$,is very useful. The fracture criterion, method of strength evaluation and prediction of fracture strength by the stress singularity factor on the adhesively bonded dissimilar materials are proposed.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.319-325
• /
• 2004

In this study, analysis and design programs of bending of RC beams strengthened with fiber sheets are developed by using Visual Basic Language. The program consists two groups, ultimate strength method and nonlinear flexural analysis method. Ultimate strength method regards concrete compressive stress as a rectangular stress block and do not consider tensile stress of concrete and load-deflection curves. On the other hand, nonlinear flexural analysis considers tensile stress of concrete, load-deflection curves, state of stress distribution and failure strain of strengthening material. Also, the analysis method used in this study regards nonlinear flexural stress as compressive stress of concrete. This program can be a good tool for determining the bending strength of strengthened RC beams and estimating the amount of fiber sheets for practical use.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.234-241
• /
• 1999

Rails have residual stresses produced during manufacturing processes. The residual stresses play all important role on brittle fracture, fatigue strength and derailment by producing cracks in the web of rail. The web saw-cut test is a technique developed to measure the bulk longitudinal residual stress level. It is a simple mettled to estimate a stress intensity factor, $_{4}$ for a web crack by using the radii of curvature of the upper and lower portions of a cut rail. But according to this method, $_{4}$ varies along the rail length because the curvatures along tile rail length vary In this paper, tile residual stress was estimated by Finite Element Method and tile web saw-cut method. In addition tile variation of the residual stress with time was investigated.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.5
• /
• pp.849-856
• /
• 2015

Objectives: The purpose of the study is to investigate the influence of social characteristics and self leadership on stress coping method in the dental hygiene students. Methods: A self-reported questionnaire was completed by 436 dental hygiene students in J area from November 10 to December 10, 2013. The questionnaire consisted ofsocial characteristics of the subjects, self leadership, and stress coping method. The reliability was evaluated by Cronbach alpha. Data were analyzed by frequency, one-way ANOVA, multiple regression analysis using the SPSS 12.0 statistical package program. The self leadership was developed by Mans and adapted and modified by Kim and Park. The leadership included 18 questions of self expectation, rehearsal, goal setting, self reward, self criticism, and constructive area. The stress coping method was developed by Folkman and Lazarus, and adapted and modified by Park. The stress coping method included 24 questions of problem focused coping, seeking social support, emotion focused coping, and wishful thinking. Results: The best stress coping method was wishful thinking and the score was 2.81. The priority order of stress coping method included social support, problem focused coping, and emotion focused coping. The self-expectation, goal setting, self-criticism proved to be highly relevant factors. The explanation power of stress coping method was 29.1 percent. The self expectation, rehearsal, self reward, and self criticism were passive coping methods and the explanation power was 15.4 percent. Conclusions: The self leadership is the most important factor to fulfill the interpersonal relationship abilities, major satisfaction, and satisfaction with clinical practice. The self leadership leads to stress coping ability.

• Structural Engineering and Mechanics
• /
• v.62 no.6
• /
• pp.781-788
• /
• 2017

In this paper, a stress wave model is established to describe the three states (separate, contact and impact) of clearance joints. Based on this stress wave model, the propagation characteristics of stress wave generated in clearance joints is revealed. First, the stress wave model of clearance joints is established based on the viscoelastic theory. Then, the reflection and transmission characteristics of stress wave with different boundaries are studied, and the propagation of stress wave in viscoelastic rods is described by the characteristics method. Finally, the stress wave propagation in clearance joints with three states is analyzed to validate the proposed model and method. The results show the clearance sizes, initial axial speeds and material parameters have important influences on the stress wave propagation, and the new stress waves will generate when the clearance joint in contact and impact states, and there exist some high stress region near contact area of clearance joints when the incident waves are superposed with reflection waves, which may speed up the damage of joints.

• Korean Journal of Health Education and Promotion
• /
• v.18 no.3
• /
• pp.117-131
• /
• 2001

This study was attempted to develope a highly reliable and valid tool which is useful to assess the Korean obese adolescents' stress and coping method. The data were collected from the total of 600 obese students from middle and high schools in Pusan. The author used a convenience sampling method. The data collection was done from March 2 to July 11, 1999. The analysis of the data was done with SPSS Win(10.0) for descriptive statistics and factor analysis. The preliminary tool was composed of 72 items(stress items: 34, coping method items: 38) with the five point Likert scale. Item analysis and inter consistency were calculated for reliability and validity through pre-test. The preliminary tool was analyzed for reliability and validity. Finally, the tool was of 65 items(stress items: 33, coping method items: 32). The results were as follows: 1. Cronbach Coefficient Alpha for the 33 items of stress was .9485 and the 32 items of coping method was .8534. 2. The factor analysis was done in order to confirm construction and the items were extracted Oblimin rotation and Maximum likelihood extraction method. 3. The factor analysis showed 6 factors in stress and 10 factors in coping method. These 6 factors of stress explained 62.4％ and 10 factors of coping method explained 57.4％. 4. Six factor of stress lable were 〈outward appearance〉, 〈boyfriend/ girlfriend〉, 〈occur an outbreak of disease〉, 〈mutual relation of family〉, 〈an obese figure〉, 〈be a burden on exercise〉. 5. Ten factor of coping method lable were 〈be concerned about another affairs〉, 〈recreation activities〉, 〈self-violence〉, 〈relaxation〉, 〈hobby activities〉, 〈avoid a situation〉, 〈communication〉, 〈music〉, 〈negative behavior〉, 〈positive thinking〉. The results of using this scale in a study will contribute to design an appropriate school health management of obese students, and also it will contribute to the development of nursing research.

• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.66-71
• /
• 2003

The release of residual stress by mechanical loading and unloading is often performed in the fabrication of box structure fur steel bridge. The proper degree of loading and unloading is significant at release method of residual stress by mechanical loading because that degree is changed by material and geometric shape of welded structure. Therefore, the simulation model that could exactly analyze the release of residual stress by mechanical loading is to be necessary. In this study, the non-linear behavior of weldments under external loading and unloading, such as the decrease and increase of structure stiffness, was investigated by monitoring of nominal stress and strain. Tensile loading and unloading test and the proper degree of stress relaxation was measured by sectioning technique using strain gauge. Analysis model that is indispensable for the effective application of MSR method was established on the basis of test and measurement result.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.47-57
• /
• 1994

This study investigates the crack propagation behavior to examine the effect of welding residual stress by the superposition method. Especially, as the crack propagation behavior is affected by the applied stress and the stress ratio in compressive residual stress filed, it is studied for three cases as follows; (1) $K_{min}$is smaller than l $K_{r}$l, (2) $K_{min}$ is smaller than l $K_{r}$l in the later stage, (3) $K_{min}$is lager than l $K_{r}$l. The resuslts show that the superposition method is very useful in all the three cases of compressive residual stress field, but is inappropriate in predicting the crack propagation behavior in tensile residual stress field.field.field.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.59-67
• /
• 2006

Recently, application of friction welded SUH35/SUH3 is increasing in the manufacturing process of automotive engine valves For securing its reliability and a reasonable strength evaluation method, it is necessary to assess stress singularity under the residual stress condition on the friction welded interface between dissimilar materials. In this paper, strength evaluation method of friction welded materials was investigated by boundary element method and static tensile testing. An advanced method of quantitative strength evaluation for SUH35/SUH3 friction welded material is to be suggested by establishing fracture criterion by using stress singularity factors.