• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.5-9
• /
• 2002

This paper presents a method and procedure for stress analysis and sizing in development of structures of a large composite wind turbine blade. Structural requirement of IEC standard was reviewed to set up appropriate analysis method and procedure. Several structural layouts were examined in a viewpoint of a large scale wind turbine blade. For the critical load cases, stress analysis were performed using finite element method. Stacking sequence and thickness of a laminate for each part and location were determined considering stress levels and producibility. Nonlinear geometric analysis was performed to check stability problem due to local buckling of a skin structures.

• 대한기계학회논문집
• /
• 제1권4호
• /
• pp.190-195
• /
• 1977

A descriptive demonstration of the principles in the utilization of the two dimensional photoelasticimeter "TYPE ROBERT" is presented. This apparatus permits pointwise measures of the photoelastic chatacteristics in the bireferengerent materials. Two plate models are used to analyse the stress concentration effects around the hole, one in the state of plane stress, the other under the condition of distributed edge moments. For the latter case, stress freeze technique is adapted. Several slices are cut form the stress frozen model and photoelastically analysed. These same models are also analyzed by use of the finite element method. The photoelastic results show very good accordance with analytic solutions, while the finite element method looks less efficient for the particular problems treated.s treated.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.560-566
• /
• 2000

Many researchers have dealt with the problems of fracture mechanics. Generally, these researches are concerned with crack in isotropic material without other micro defects. Actual structure, however, may contain micro defects as well as crack in manufacture processing or operation. If it contains mi defects near a crack, some different characteristics will be appear in fracture behaviors of the crack. This study examines the effect of the micro defect on stress intensity factor of center slant crack rectangular plate subjected to uniform uniaxial tensile stress. In this study, boundary element method(BEM) is used for analysis in stress intensity factor(SIF).

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.180-185
• /
• 2000

An interface V-notched crack problem can be formulated as a eigenvalue problem. there are the eigenvalues which give stress singularities at the V-notched crack tip. The RWCIM is a method of calculating the eigenvector coefficients associated with eigenvalues for a V-notched crack problem. Obtaining the stress intensity factors for an interface crack in dissimilar materials is examined by the RWCIM. The results of stress intensity factors for an interface crack are compared with those of the displacement extrapolation method by the BEM

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.286-291
• /
• 2001

Applications of bonded dissimilar materials such as IC package, ceramic/metal and resin/metal bonded joints, are very increasing in various industry fields. It is very important to analyze the thermal stress and stress singularity at interface edges in bonded joints of dissimilar materials. In orer to understand the package crack emanating from the edge of Die pad and Resin, fracture mechanics of bonded dissimilar materials and material properties are obtained. In this paper, the thermal stress and its singularity index for the IC package were analyzed using 2-dimensional elastic boundary element method. Crack propagation angle and path by thermal stress were numerically simulated with boundary element method.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.234-238
• /
• 2015

When we use a Finite Elements Method (FEM) to solve a linear static analysis problem, number of elements need to be sufficiently small for convergence of the solution. If we analysis a part, whose curvature is varying heavily, we face to determine how small the elements size is, because the calculated stress is increased as the elements are smaller. In this case, we need to analysis with mesh insensitive method, stress linearization. We can get a solution that is not varying with the elements size if the size is smaller than a certain level. In this paper, we evaluate a pressure vessel having geometrical discontinuities using stress linearization. First, we analysis the vessel with global model, including all part of the vessel, using large shell elements. Second, we analysis the local part of the vessel, which is the small part occurring maximum stress, using small continuum elements. Last, we evaluate the safety of the pressure vessel according to the ASME Sec. VIII Div 2.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.387-392
• /
• 2007

The loss of strength in an aircraft structure as a result of cyclic stress over a period of life time is an important phenomenon for aircraft analysis. Load/stress spectrum can be constructed from the occurrence frequency based on the load/stress histories during a service lifetime. In this paper, three types of fatigue spectrum was compared. The rainflow counting method was applied to concentrate the stress spectrum obtained from the flight loads recorder(FLDR). A fatigue analysis for different stress spectrum was performed by using LUSAS computer application.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.244-250
• /
• 1998

In this study, the stress intensity factors of center crack are analyzed when it is surrounded by symmetrically distributed small cracks. The values of stress intensity factors of the center crack are greatly influenced by the locations of distributed small cracks. When small cracks overlap or approach near the tip of a center crack, the effect of interaction arisen by these cracks becomes noticeable. In case of multiple distributed small cracks, the stress intensity factor of a center crack is found to be efficiently determined by the superposition method.

• Geomechanics and Engineering
• /
• 제33권4호
• /
• pp.393-400
• /
• 2023

Displacements near crack and stress intensity factor (SIF) are key parameters to solve rock failure issue when using fracture mechanics. In order to study the horizontal displacement and stress intensity factor of the mode I fracture, a series of three-point bending tests of granite specimens with central notch were carried out. The evolution of horizontal displacements of precast notch and crack tip opening displacements (CTOD) were analyzed based on the digital image correlation (DIC) method. Stress intensity factors for three-point bending beams with arbitrary span-to-width ratios(S/W) were calculated by using the WU-Carlsson analytical weight function for edge-crack finite width plate and the analytical solution of un-cracked stress by Filon. The present study provides a high efficient and accurate method for fracture mechanics analysis of the three-point bending granite beams.

• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.75-83
• /
• 2023

For three-dimensional finite element welding residual stress simulation, several methods are available. Two widely used methods are the moving heat source model using heat flux and the temperature boundary condition model using the temperature profile of the welded beads. However, each model has pros and cons in terms of calculation times and difficulties in determining welding parameters. In this paper, a new method using the moving temperature profile model is proposed to perform efficiently 3-D FE welding residual stress analysis for large structures. Comparison with existing experimental residual stress measurement data of two-pass welding pipe and SNL(Sandia National Laboratories) mock-up canister shows the accuracy and efficiency of the proposed method.