• Journal of Welding and Joining
• /
• v.24 no.3
• /
• pp.27-33
• /
• 2006

Structural stress approach is well known as a mesh-size insensitive fatigue assessment method by using finite element analyses. It is, however, difficult to estimate the structural stress (SS) at weld end points due to stress singularities when shell elements are used. In this study, fatigue evaluations with longitudinal load carrying box fillet weldment under out-of-plane bending load have been performed by using virtual node method (VNM) in order to avoid the problem, which is called the weld end effect. Various combinations of virtual node parameters, such as reference point and virtual node locations, are investigated for the estimation of proper structural stress values applying VNM in a systematic manner. The appropriate guidance of virtual node parameter has been offered for the fillet weldment considered in the study. The structural stress values obtained by VNM have also been validated by comparing the result with finite element model including weld bead. Moreover, the fatigue strength of the fillet weldment based on the equivalent structural stress is shown to be consistent with the master S-N curve.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.2 no.2
• /
• pp.141-150
• /
• 2007

Objectives : The purpose of this study was to investigate the correlation of stress and meridian muscle electrography in Korean adult males. Methods : Sixty-nine volunteers suffering from stress participated in this study. Physical examination, stress survey and meridian muscle electrography were performed. Each variable was compared with each other by correlation analysis. Results : Correlation between stress response inventory and fatigue of trapezius muscle right upper portion was statistically significant. In relationship between sub scales of stress response inventory and meridian muscle electrography, fatigue of trapezius muscle right upper portion was statistically significant with tension, depression, and frustration. Contraction power of left sternocleidomastoid muscle was significant with somatization and others were not significant. Conclusions : In Korean adult males, trapezius muscle shows more fatigue under more stress. This suggests that stress influences muscle fatigue. Although meridian muscle electrography is not a typical method for the evaluation of pain nor stress, this is referential method to clinical evaluation of painful shoulder caused stress.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1120-1128
• /
• 1999

An elastic-viscoplastic finite element analysis is performed to investigate detailed growth behavior of creep cracks and the numerical results are compared with experimental results. In Cr-Mo steel stress fields obtained from the crack growth method by mesh translation were compared with both cases that the secondary creep rate is only used as creep material property and the primary creep rate is included. Analytical stress fields, Riedel-Rice(RR) field, Hart-Hui-Riedel(HR) field and Prime(named in here) field, and the results obtained by numerical method were evaluated in details. Time vs. stress at crack tip was showed and crack tip stress fields were plotted. These results were compared with analytical stress fields. There is no difference of stress distribution at remote region between the case of 1st creep rate+2nd creep rate and the case of 2nd creep rate only. In case of slow velocity of crack growth, the effect of 1st creep rate is larger than the one of fast crack growth rate. Stress fields at crack tip region we, in order, Prime field, HR field and RR field from crack tip.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.61-63
• /
• 2001

Residual stress distribution in injection-molded short fiber composites was determined using layer-removal method. Polysterene with 3 vol% carbon fibers was injection-molded into the tensile specimen. With milling machine layer-removal process was conducted and the curvature data were acquired. Treuting and Read analysis which is assuming isotropic material, and White analysis considering anisotropy due to the fiber orientation were used to calculate residual stress of the flow direction through the thickness direction and compared with each other.

• Journal of the KSME
• /
• v.16 no.2
• /
• pp.100-107
• /
• 1976

Stress analysis of tapered cylinder of reactor vessels is investigated by means of the intersection method. The tapered cylinder is approximated into three models-average cylinder, conical frustum, and ring. The results are compared with those of the finite element method program and an experiment. In this paper, the following results are obtained: (1) the best aproximation has been obtained by the ring model analysis: (2) the intersection analysis of the tapered cylinder by the ring model shows a sufficient accuracy for the stress analysis of reactor vessels.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.117-122
• /
• 2000

In this paper the stress intensity factor under uniform pressure in the arbitrarily-shaped plane crack configuration transformed elliptic crack by Mobius mapping are determined. Using Dyson's formula Boussinesq-Papkovich potentials for mode I deformation are constructed. In the example the stress intensity factors are approximately calculated by least square method.

• Structural Engineering and Mechanics
• /
• v.6 no.1
• /
• pp.115-124
• /
• 1998

A novel boundary stress resolution method is suggested in this paper, which is based upon the displacements of finite element analysis and of high precision with stress boundary condition strictly satisfied. The method is used to modify the Zienkiewicz-Zhu ($Z^2$) a posteriori error estimator and for the h-version adaptive finite element analysis of crack problems. Successful results are obtained.

• Korean Architects
• /
• no.11 s.82
• /
• pp.22-25
• /
• 1975

The aim of this study is the introduction of simplified method for the design stress analysis of multi-span gable frame structures with crane supports. Under the author's assumptions made previously for the same structures of single span, simplified stress analysis and exact computer analysis are excuted for some multi-span sample structures. Comparing the results of both stress analysis and with some modifications, a feasible simplified method for the design stress analysis of multi-span gable frame structures with crane supports is established.

• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.115-121
• /
• 1996

This paper describes an analysis of the stress intensity factor (SIF) of the presented cracks in LNG piping. The stress analysis used the Finite Element Method. The stress Intensity factor calculated Raju & Newmann equation and ASME Section XI method. The cracks in the flanges are found to be influenced by temperature, but the cracks of the piping are found not to be influenced by temperature. If the cracks shape in the flanges and the cracks shape of the piping are same each other, the cracks in the flange will be dangerous more than the cracks of the piping.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.377-381
• /
• 2009

In the development of an interior permanent magnet synchronous machine (IPMSM) for high-speed operation, the problem of mechanical stress of the rotor by centrifugal force becomes more essential as the speed and size of the machines increase. In this paper, the optimal design process combined with mechanical stress analysis was presented. In the analysis of mechanical stress, the node and element data obtained by the electromagnetic field analysis program are also used in the stress analysis. Therefore, the different pre-processing for the stress analysis program is no longer required. Therefore, the computing time of the new method is very short compared with the conventional approach, and when repeated analyzes of various models are required, this method is very useful. The validity of our methods was verified by comparing simulation results with conventional and experimental data.