• Journal of Music and Human Behavior
• /
• v.2 no.2
• /
• pp.33-56
• /
• 2005

The purpose of this study is to measure the effect of musical activities on children's aggressiveness using percussion playing through case studies and to present the therapeutic programs. Musical activities using percussion playing were organized for three aggressive children. Twenty-one small group sessions were conducted over seven weeks with 30 minutes given each session. Fourth-grade children involved in using Aggressiveness Measuring Tool for Teachers-revised by Gwak Geum-Joo(1992) was selected for case studies. Children's impulsiveness was also tested through self-test measuring tool for impulsiveness-revision of 16 questions used by Cho Hae Yeon (2001) and Lee Joo Shik (2003). As quantitative method, comparative analysis was made between the pre and post test results using measuring tools for aggressiveness and impulsiveness of children as well as between aggressive behaviors occurring in the initial stage of the first three sessions and in the latter stage of the last three sessions. Qualitative method was used at the same time to examine the effect of percussion playing on children. After the musical activities, child A showed reduced Aggressive Measuring Tool scores from 19 to 18, with child B from 23 to 19 and child C from 21 to 18. The results show that occurrence of aggressive behaviors were lowered in the post test. Impulsiveness Measuring Tool scores in the post test were decreased as well in all three children. During the music therapy programs, it was also observed that the frequency of the target behaviors in all three children has reduced more in the latter stage than the initial stage of music therapy. The qualitative findings indicate that the children experienced releasing stress through self-expression after percussion playing. These findings indicate therapeutic effectiveness of music therapy using on percussion playing in reducing aggressiveness of children as well as the effectiveness of percussion as a therapeutic intervention for aggressive children. These results can be adapted and reapplied by teachers in primary schools to approach children with behavior problems, and can present a useful therapeutic approach to therapists practicing in clinical environments.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.412-421
• /
• 2006

Objective: The result of finite element analysis depends on material properties, structural expression, density of element, and boundar or loading conditions. To represent proper elastic behavior, a finite element model was made using Hounsfield unit (HU) values in CT images. Methods: A 13 year 6 month old male was used as the subject. A 3 dimensional visualizing program, Mimics, was used to build a 3D object from the DICOM file which was acquired from the CT images. Model 1 was established by giving 24 material properties according to HU. Model 2 was constructed by the conventional method which provides 2 material properties. Protraction force of 500g was applied at a 45 degree downward angle from Frankfort horizontal (FH) plane. Results: Model 1 showed a more flexible response on the first premolar region which had more forward and downward movement of the maxillary anterior segment. Maxilla was bent on the sagittal plane and frontal plane. Model 2 revealed less movement in all directions. It moved downward on the anterior part and upward on the posterior part, which is clockwise rotation of the maxilla. Conclusion: These results signify that different outcomes of finite element analysis can occur according to the given material properties and it is recommended to use HU values for more accurate results.

• Journal of Korean Home Economics Education Association
• /
• v.29 no.1
• /
• pp.93-109
• /
• 2017

The objective of this study was to investigate the effects of the subjective perception to the nutrient intake and mental health of Korean adolescents by the residual method. This study was based on data from the 5th and 6th Korea National Health and Nutrition Examination Survey (2010-2014) of the 2,961 total subjects(male 1,548, female 1,413, aged 12 to 19 years). The nutrient intake was collected by using the 24 hr recall method and mental health and BMI were collected by the health interview survey and physical examination research. An analysis of the relationship between the subjective perception and BMI showed that the proportion of those with a distorted perception of their body type was the highest among adolescents with normal weight(p for trend, <.001). Especially, regarding the subjective body type, the proportion of adolescents who perceived themselves overweight was significantly higher among females as compared to that among males (p for trend, <.001). An analysis of nutrient intake status against the subjective perception showed that the group of adolescents who perceived themselves overweight had the lowest scores on the index of nutritional quality (INQ), nutritional adequacy ratio (NAR) and mean adequacy ratio (MAR) (p for trend, <.001). With respect to the daily intake of major nutrients, adolescents who perceived themselves overweight consumed the lowest amounts of total energy (p for trend, <.01) and carbohydrate (p for trend,<.001). An analysis of the mental health status of the adolescents showed that those who perceived themselves overweight had the highest levels of stress recognition and depression (p<0.01). In conclusion, the adolescents' subjective perception is associated with their nutrient intake and mental health. Therefore, some educational programs are desirable to help the adolescents to have their desirable subjective perception and to increase their satisfaction with their body type.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.182-206
• /
• 2003

Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.293-299
• /
• 2010

Vertically aligned ZnO nanorods on Si (111) substrate were prepared by hydrothermal method. The ZnO nanorods on spin-coated seed layer were synthesized at $140^{\circ}C$ for 6 hours in autoclave and were thermally annealed in argon atmosphere for 20 minutes at temperature of 300, 500, $700^{\circ}C$. The effects of the thermal annealing on the structural and optical properties of the grown on ZnO nanorods were investigated by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), photoluminescence (PL). All the ZnO nanorods show a strong ZnO (002) and weak (004) diffraction peak, indicating c-axis preferred orientation. The residual stress of the ZnO nanorods is changed from compressive to tensile by increasing annealing temperature. The hexagonal shaped ZnO nanorods are observed. The PL spectra of the ZnO nanorods show a sharp near-band-edge emission (NBE) at 3.2 eV, which is generated by the free-exciton recombination and a broad deep-level emission (DLE) at about 2.12~1.96 eV, which is caused by the defects in the ZnO nanorods. The intensity of the NBE peak is decreased and the DLE peak is red-shifted due to oxygen-related defects by thermal annealing.

• Journal of Life Science
• /
• v.21 no.9
• /
• pp.1214-1218
• /
• 2011

We investigated the fruits of Rubus crataegifolius Bge, a plant which has been traditionally used in Korea in phytotherapy, to describe antioxidant materials from plant sources. R. crataegifolius fruits were extracted with methanol and further fractionated into n-hexane, diethyl ether, and ethyl acetate. The antioxidant activity of each fraction and the residue was assessed using a 1,1-diphenyl-2-picrylhydrazyl (DPPH), $H_2O_2$ radical scavenging method, and their cytotoxicity on human primary kerationcyte (HK) was determined by an MTS assay. The R. crataegifolius fruit methanol extract showed strong antioxidant activity (75.04%, 50%) compared with vitamin C (79.9%, 54.1%) by the DPPH, and $H_2O_2$ method, respectively. The measured activity from the subsequent extracts of the methanol extract were 20.3% for n-hexane fraction (HF), 68.8% for diethyl ether fraction (DF), 67.1% for ethyl acetate fraction (EF), and 67.1% for the residue fraction (RE) by DPPH and 2.2% for HF, 1.6% for DF, 10% for EF, and 50% for the RE by $H_2O_2$ assay. An oxidative stress model of HK was established under a suitable concentration (1 mM). The cell viability of the RE treated group increased and the percentage of apoptotic cells decreased at concentrations of 0.005-0.02% RE compared with the $H_2O_2$ treated group. Fruit extracts of the medicinal plant R. crataegifolius showed potent antioxidant activity and the ability to relieve cell damage from $H_2O_2$ induced injury to HK.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.55-61
• /
• 2009

Recently, the number of high-rise buildings being built in Korea by major construction companies for residential and commercial use has been increasing. When constructing a high-rise building, it is necessary to apply massive amounts of concrete to form a mat foundation that can withstand the huge load of the upper structure. However, it is of increasing concern that due to limitations in terms of the amount of placing equipment, available job-sites and systems for mass concrete placement in the construction field, it is not always possible to place a great quantity of concrete simultaneously in a large-scale mat foundation, and for this reason consistency between placement lift cannot be secured. In addition, a mat foundation Is likely to crack due to the stress caused by differences inhydration heat generation time. To derive a solution for these problems, this study provides test results of a hydration heat crack reduction method by applying placement lift change and setting time control with a super retarding agent for mass concrete in a large-scale mat foundation. Mock-up specimens with different mixtures and placement liftswere prepared at the job-site of a newly-constructed high-rise building. The test results show that slump flow of concrete before and after adding the super retarding agent somewhat Increases as the target retarding time gets longer, while the air content shows no great difference. The setting time was observed to be retarded as the target retarding time gets longer. As the target retarding time gets longer, compressive strength appears to be decreased at an early stage, but as time goes by, compressive strength gets higher, and the compressive strength at 28 days becomes equal or higher to that of plain concrete without a super retarding agent. For the effect of placement lift change and super retarding agent on the reduction of hydration heat, the application of 2 and 4 placement lifts and a super retarding agent makes it possible to secure consistency and reduce temperature difference between placement lifts, while also extending the time to reach peak temperature. This implies that the possibility of thermal crack induced by hydration heat is reduced. The best results are shown in the case of applying 4 placement lifts.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.237-257
• /
• 2014

This study is the process of performing the interdisciplinary fusion study between multiple fields by identifying the status on the previous artistic education considering the brain scientific mechanism of image creativity and brain-based learning principles. In recent years, producing the educational methods of each field as the fusion study activities are emerging as the trend and thanks to such, the results of brain-based educational fusion studies are being presented for each field. It includes artistic fields such as music, art and dance. In other words, the perspective is that by understanding the operating principles of the brain while creativity and learning is taking place, when applying various principles that can develop the corresponding functions as a teaching method, it can effectively increase the artistic performance ability and creativity. Since the animation drawing should be able to intuitively recognize the elements of movement and produce the communication with the target beyond the delineative perspective of simply drawing the objects to look the same, it requires the development of systematic educational method including the methods of communication, elements of higher cognitive senses as well as the cognitive perspective of form implementation. Therefore, this study proposes a literature study results on the artistic education applied with brain-based principles in order to design the educational model considering the professional characteristics of animation drawing. Therefore, the overseas and domestic trends of the cases of brain-based artistic education were extracted and analyzed. In addition, the cases of artistic education studies applied with brain-based principles and study results from cases of drawing related education were analyzed. According to the analyzed results, the brain-based learning related to the drawing has shown a common effect of promoting the creativity and changes of positive emotion related to the observation, concentration and image expression through the training of the right brain. In addition, there was a case of overseas educational application through the brain wave training where the timing ability and artistic expression have shown an enhancement effect through the HRV training, SMR, Beta 1 and neuro feedback training that strengthens the alpha/seta wave and it was proposing that slow brain wave neuro feedback training contributes significantly in overcoming the stress and enhancing the creative artistic performance ability. The meaning of this study result is significant in the fact that it was the case that have shown the successful application of neuro feedback training in the environment of artistic live education beyond the range of laboratory but the use of the machine was shown to have limitations for being applied to the teaching methods so its significance can be found in providing the analytical foundation for applying and designing the brain-based learning principles for future animation drawing teaching methods.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.14 no.2
• /
• pp.134-145
• /
• 2001

Introduction: Noises in the ear, whether real or imagined, are called tinnitus. Subjective causes of tinnitus(which is heard only by the patient) are extremely common and the majority of them are treated conservatively. For certain individuals their tinnitus is a major handicap; for others a trivial concern. The most common from of subjective tinnitus is a rushing, hissing or buzzing noise; it is frequently associated with sensorineural heanng loss. The patient may be unaware of the hearing loss, especially if it is a high frequency deficit of moderate severity. The character of the tinnitus may give a clue to the etiology. But the patient often has difficulty in explaining his/her tinnitus in absolute terms, as they have no other tinnitus with which to compare it but their own Tinnitus, like pain, is a subjective state and trying to objectively assess the severity is problematic. Audiological techniques to match subjective loudness to machine-produced noise may offer some help, in that sound intensity matches can bear little correspondence to subjective complaint. In spite of many studies, most patients presently seen complaining of tinnitus are told by their doctors that there is no treatment and that they will have to learn to live with this symptom. Objectives: To perform a clinical analysis of tinnitus and estimate the efficacy of Oriental Medical treatment according to the Byeonjeung(辨證). Subject: We studied 34 patients with complaints of tinnitus who had visited Pundang Cha Oriental Medicine Hospital Department of Otorhinolaryngology from March 1998 to February 2000. All of them had been treated 2 or 3 times a week with acupuncture treatment and had taken herbs according to the Byeonjeung(辨證) method. It was therefore possible for me to know whether their symptoms improved or not. Parameters Observed and Method: We treated them with acupuncture & herb-medication. Sometimes we gave them moxibustion or negative therapy with bloodletting at the acupuncture points(耳門, 聽宮, 聽會). Parameters Observed 1) Distribution of age & sex 2) Chief complaints 3) The sites of tinnitus 4) The quality of tinnitu 5) The duration of disease 6) The problem induced tinnitus 7) Factors increasing disease severity 8) The classification of the Byeonjeung(辨證) 9) The efficacy of treatments Results: 1. Age and sex distribution: The most common occurrence was found in males in their twenties: 6 males($17.7\%$), and in females in their thirties and over sixty: 8 females($23.5\%$). Total patient numbers for men and women were 20 men($58.8\%$), 14 women ($41.2\%$). 2. The most frequent major complaints were hearing disturbances related to tinnitus; and dizziness with tinnitus; each comprising 10 cases($29.4\%$). There were also 7 patients($20.6\%$) with only tinnitus. 3. Tinnitus sites: 13($38.2\%$) said that they felt tinnitus in both ears, equally. In the right ear, 9($26.5\%$), in the left, 6($17.7\%$). 4. The most frequent descriptive symptoms of tinnitus were: humming, hissing, buzzing etc. 5. The duration of disease. 14cases($41.2\%$) had a duration of less than 1 year. 6. 15cases($44.1\%$) complained that it was hard to watch TV or make a phone call because of tinnitus. 10 cases($29.4\%$) complained about depression. 7. Factors increasing severity of tinnitus: ⅰ) fatigue: 18cases($52.9\%$) ⅱ) stress/ tension: 10 cases($29.4\%$) ⅲ) alcohol and tobacco: 5cases($l4.7\%$) 8. Classification through Byeonjeung : ⅰ) 19 cases($55.9\%$) were classified as showing Deficiency syndrome. ⅱ) 15 cases($44.l\%$) were classified as showing Excess syndrome. The deficiency of Qi was 7($20.6\%$), deficiency of Xue, 8($23.5\%$) and insufficiency of the Kidney Yin & Yang, 4($11.8\%$). The flare of Liver fire was 8($23.5\%$) and phlegm-fire, 7($20.6\%$), 9. The efficacy of treatments showed: an improvement in 17cases($50.0\%$); no real improvement or changes in 13 cases($38.2\%$); and some worsening in 4 cases($11.8\%$). In the group with deficiency in Qi, 4($57.1\%$) improved, 1($14.3\%$) showed no change and 2($28.6\%$) were aggravated. In the cases of deficiency in Xue, 6($75.0\%$) improved, 2($25.0\%$) showed no change. In the cases of insufficiency of Kidney Yin & Yang, 3($75.0\%$) showed no change and 1($25.0\%$) were aggravated. In the group of flare of Liver fire, 4($50.0\%$) improved, 3($37.5\%$) no change and 1($12.5\%$) were aggravated. In the cases of phlegm-fire, 3($42.9\%$) improved, 4($57.1\%$) showed no change. Conclusion: We would recommend that any further studies of tinnitus utilize trial treatments of longer than 2 months duration, as any positive effects observed in our study showed that improvement occurred fairly slowly. And we suggest that this study could be utilized as a reference for clinical Oriental Medical treatment of tinnitus. If we try to apply music or sound therapy treatment properly combined with ours, we expect it to provide psycological stability in addition to inducing masking effects, even though it may not directly decrease or completely remove tinnitus.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.331-338
• /
• 2018

The purpose of this study was to determine the optimum sterilization conditions for the production of retorted steamed egg using response surface methodology. Sterilization processes for eighteen conditions using varying sterilization temperature ($X_1$), time ($X_2$), and method ($X_3$) as the independent variables were carried out through a $3^2{\times}2$ experimental factorial design. Quality evaluations after sterilization included measurements of $F_0$ value ($Y_1$), peak stress ($Y_2$), pH ($Y_3$), color value ($Y_{4-6}$), and organoleptic test [preference for appearance ($Y_7$), overall acceptability ($Y_8$), and preference for texture ($Y_9$) and egg taste ($Y_{10}$)]. Dependent variables ($Y_{1-10}$) of eighteen conditions were more affected by temperature and time than by the sterilization method. Eight factors were selected among the dependent variables as significant factors related to the quality of the steamed egg. Finally, by establishing an optimum range of each dependent variable and contour analysis, the optimum sterilization conditions for the production of steamed egg were determined to be $120^{\circ}C$ for 25 min using a 2-step sterilization process.