• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.201-207
• /
• 2010

Recently, about 600 cases of marine accidents occur annually in Korea. According to many studies and analyses on occurrence of marine accidents, 70~80% of marine accidents were caused by human factors. Among the human factors, navigation officers' fatigue is very important factor. Although navigation officers' fatigue serves as an important role in marine accidents, there is no method to exactly examine the degree of officers' fatigue. Accordingly, this study analyzed human factors according to types of marine accidents and extracted important five factors affecting navigation officers' fatigue through the questionnaire survey by means of literatures and 5-point scale. In addition, evaluation factors of marine accident risks caused by fatigue factors were divided and structured by using ISM. Lastly, it found out the importance of each fatigue factor drawn by AHP and decided marine accidents that were most highly caused by navigation officers' fatigue in order. At the result, weights were high as sleep time 0.385, stress 0.302, health condition 0.139, rest time 0.099, alcohol and drug 0.074 in fatigue factors, and death and injury 0.328, collision 0.308, grounding 0.195, sinking 0.094, fire accident 0.075 in evaluation factors of marine accident risks. Therefore, the control plan to lower marine accident risks should be prepared on the basis of high weight factors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.246-252
• /
• 2018

In this paper, the friction drag force of 3D submerged body is investigated by considering the surface roughness, the first grid height, and the Reynolds number using open CFD source code, OpenFOAM 4.0. A procedure for estimating drag components by CFD code is set up and suggested in this study. In the 3D submerged body, because of the form factor in the 3D computations, the friction resistance with the small roughness of $12{\mu}m$ obtains different result with the smooth wall. As the Reynolds number increased, the boundary layer becomes thinner and the fiction resistance tends to decrease. In the computations for the effect of y+, the friction resistance and wall shear stress are excessively predicted when the y+ value deviates from the log layer. This is presumably because the boundary layer becomes thicker and the turbulence energy is excessively predicted in the nose due to the increase in y+ value. As the roughness increases, the boundary layer becomes thicker and the turbulence kinetic energy on the surface increases. From this study, the drag estimation method, considering the roughness by numerical analysis for ships or offshore structures, can be provided by using the suggested the y+ value and surface roughness with wall function.

• Computational Structural Engineering
• /
• v.2 no.1
• /
• pp.65-70
• /
• 1989

An analytical study was conducted using the Galerkin technique to determine behaviour of thin fibrereinforced and laminated composite pipes under soil pressure. Geometric nonlinearity and material linearity have been assumed. It is assumed that vertical and lateral soil pressure are proportional to the depth and lateral displacement of the pipe respectively. It is also assumed that radial shear stress is negligible because the ratio of thickness to the radius of pipe is very small. The above results are verified by the finite element analysis.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.508-515
• /
• 2004

In this study, salting conditions and dehydration methods were investigated. Salting time, concentration and temperature could be considered to variables in salting conditions. The diffused salt amounts to beef jerky depending on time are sharply increased in two hours. This result is caused by the difference decrease of concentration gradient between bulk solution and beef jerky. The increase of salting concentration and temperature resulted also in the increase of a diffused salt. The deeper bulk concentration made diffusion to beef easily with the bigger driving force and the movement of molecules is more active according to temperature increase. Dehydration is conducted with various methods such as natural drying, cold air drying and hot air drying. Comparing with color and texture among the drying methods, cold air drying showed superior quality in color and texture. Beef jerky by cold air drying colored more reddish than other drying methods and good cutting shear stress and tensile strength. In case of hardness and chewiness, hot air drying method showed the highest value, which means the worst texture.

• Corrosion Science and Technology
• /
• v.8 no.4
• /
• pp.162-169
• /
• 2009

Pure titanium and its alloys are drastically used in implant materials due to their excellent mechanical properties, high corrosion resistance and good biocompatibility. However, the widely used Ti-6Al-4V is found to release toxic ions (Al and V) into the body, leading to undesirable long-term effects. Ti-6Al-4V has much higher elastic modulus than cortical bone. Therefore, titanium alloys with low elastic modulus have been developed as biomaterials to minimize stress shielding. For this reason, Ti-30Ta-xZr alloy systems have been studied in this study. The Ti-30Ta containing Zr(5, 10 and 15 wt%) were 10 times melted to improve chemical homogeneity by using a vacuum furnace and then homogenized for 24 hrs at $1000^{\circ}C$. The specimens were cut and polished for corrosion test and Ti coating and then coated with TiN, respectively, by using DC magnetron sputtering method. The analyses of coated surface were carried out by field emission scanning electron microscope(FE-SEM). The electrochemical characteristics were examined using potentiodynamic (- 1500 mV~+ 2000 mV) and AC impedance spectroscopy(100 kHz~10 mHz) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The equiaxed structure was changed to needle-like structure with increasing Zr content. The surface defects and structures were covered with TiN/Ti coated layer. From the polarization behavior in 0.9% NaCl solution, The corrosion current density of Ti-30Ta-xZr alloys decreased as Zr content increased, whereas, the corrosion potential of Ti-30Ta-xZr alloys increased as Zr content increased. The corrosion resistance of TiN/Ti-coated Ti-30Ta-xZr alloys were higher than that of the TiN-coated Ti-30Ta-xZr alloys. From the AC impedance in 0.9% NaCl solution, polarization resistance($R_p$) value of TiN/Ti coated Ti-30Ta-xZr alloys showed higher than that of TiN-coated Ti-30Ta-xZr alloys.

• Korean Journal of Acupuncture
• /
• v.24 no.1
• /
• pp.79-94
• /
• 2007

Objectives : Ulcerative colitis and Crohn's disease are chronic inflammatory disease of the gastrointestinal tract was identified mainly for diarrhea, stomachache, hemafecia. The source and pathologic mechanism about ulcerative colitis and crohn's disease are still unknown but stress, infection, a genetic factor, environmental factors etc. may be the cause of chronic inflammatory disease of the gastrointestinal tract recently. The purpose of the present study is to evaluate the effects of herbal acupuncture with Artemisiae Argyi for the treatment to intestinal disease in the rat with 2, 4, 6 - trinitrobenzenesulfonic acid (TNBS) induced colitis. Methods : Artemisiae Argyi Herbal acupunctures were infected in HapGok (LI4) which is used to treat for intestinal disease in clinic. All animals were subjected to the injection of saline (300 ${\mu}l$, 500 ${\mu}l$) for a study control and TNBS (300 ${\mu}l$, 500 ${\mu}l$) into the lumen of the colon, 8cm proximal to the anus through the intestine. Artemisiae Agryi' Herbal (20 mg/ml, 0.4 ml) acupunctures were injected to the LI4 (both hands) at the secondary injection time of TNBS in rats. And body weight, RBC count, WBC count, total protein, Paw edema rate, rate of protein leakage into CMC-pouch fluid, IgG levels and IgM levels were observed to study the effects of Artemisiae Argyi' Herbal acupuncture in HapGok (Ll4). Results : Artemisiae Argyi' Herbal acupuncture in HapGok (Ll4) on TNBS-induced colitis inhibit the body weight lose rate but not RBC and WBC count. Furthermore, it inhibited the reduction of total protein concentration, paw edema, rate of protein leakage into CMC-pouch fluid, IgG levels and IgM levels. Conclusions : Herbal acupuncture with Artemisiae Argyi helps recover the TNBS-induced colonic damage and may be an important method for treatment of the colitis.

• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.327-336
• /
• 1996

This study was performed to investigate the effec% of immersion in water and thermal cycling on the mechanical peoperties of light cured restorative composite resins. Five commerically available light-cured composite resins(Photo Clearfil A : CA, Lite-Fil A . LF, Clearril Photo Posterior CP, Prisms AP.H.. PA, 2100 : ZH) were unto The specimens of 12 m in diameter and 0.7 m in thickness were made, and an immersion in $37^{\circ}C$ water for 7 days and a thermal cycling of 1000 cycles at 15 second dwell time each in $5^{\circ}C$ and $55^{\circ}C$ baths were performed. Biaxial flexure test was conducted using the ball-on-three-ball method at the crosshead speed of 0.5mm/min. In order to investigate the deterioration of composite resins during the thermal cycling test, Weibull analysis for the biaxial flexure strengths was done. Fracture surfaces and the surfaces before and after the thermal cycling test were examined by SEM. The highest Weibull modulus value of 10.09 after thermal cycling tests which means the lowest strength variation, was observed in the CP group, and the lowest value of 4.47 was obsered in the LF Group. Biaxial flexure strengths and Knoop hardness numbers significantly decreased due to the thermal cycling ($\textit{p}$< 0.01), however, they recovered when specimens were drie4 The highest biaxial flexure strength of 125.65MPa was observed in the ZH group after the thermal cycling test, and the lowest value of 64.86MPa was observed in the CA group. Biaxial flexure strengths of ZH and CP groups were higher than those of PA, CF, and CA groups after thermal cycling test($\textit{p}$< 0.05). Knoop hardness numbers of CP group after the thermal cycling test was the highest(95.47 $\pm$ 7.35kg/$mm^2$) among the samples, while that of CA group was the lowest(30.73 $\pm$ 2.58kg/$mm^2$). Knoop hardness numbers showed the significant differences between the CP group and others after the thermal cycling test(($\textit{p}$< 0.05). Fracture surfaces showed that the composite resin failure developed along the matrix resin and the filler/resin interface region, and the cracks propagated in the conical shape from the maximum tensile stress zone.

• The Korean Journal of Pesticide Science
• /
• v.7 no.2
• /
• pp.131-138
• /
• 2003

A toxicological study of the pesticides for rice paddy to loach was conducted with iprobenfos 17% GR, diazinon 3 % GR, and butachlor 5 % GR to establish the field test method and their toxicological effects on loach under the actual field conditions. The type C of cage was more effective in the sense of a little stress from the cage. The nets for shading and for preventing the birds were necessary to maintain the water temperature and to prevent the predators. The cumulative mortality of loach exposed to iprobenfos 17% GR, diazinon 3% GR and butachlor 5% GR were 10, 55 and 22%, respectively, during 7 days of exposure. The averaged concentration of the pesticides in paddy water 2 days after application were 1.67, 0.22 and 0.26 mg/L, and mortalities were 7, 50 and 17%, respectively, representing the similar results with acute toxicity $(48h-LC_{50})$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2016

The purpose of this study is to predict the cracking behavior and suggest the method of controlling the cracking in concrete box culvert for power transmission due to differential drying shrinkage. Drying shrinkage cracking is mainly influenced by the moisture diffusion coefficient that determines moisture diffusion rate inside concrete structures. In addition to the diffusion coefficient, surface coefficient of concrete surface and relative humidity of ambient air simultaneously affect the moisture evaporation from concrete inside to external air outside. Within the framework of drying shrinkage cracking mechanism, it is necessary to perform the numerical analysis, which involves these three influencing factors to predict and control the shrinkage cracking of concrete. In this study, moisture diffusion and stress analysis cor responding to drying shrinkage on concrete box culvert are performed with consideration of diffusion coefficient, surface coefficient, and relative humidity of ambient air. From the numerical results, it is found that cracking behavior due to differential drying shrinkage of box culvert shows the different feature according to three influencing factors and the methodology of controlling of drying shrinkage cracks can be suggested from this study.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.6
• /
• pp.595-609
• /
• 2016

Objective: The purpose of this study was to develop and validate the guidelines for Medic Work Table (MWT) based on the anthropometric data of medical technologists. Background: Users' anthropometric data such as sitting height, sitting elbow height, knee height, and so on are significant factors for designing comfortable and useful furniture. Thus, many guidelines for different types of desks and chairs based on the users' anthropometric data have been suggested to many researchers. However, few researches have been conducted to provide design guidelines for MWT for blood collecting task. Medical technologists often use their upper extremities to perform blood collecting task with high repetitions. These repeated motions could be a critical factor in the prevalence rate of Work-related Musculoskeletal Disorders (WMSDs). Therefore, a study on ergonomic design of MWT would be essential in preventing the WMSDs and improving the quality of the working environment of medical technologists. Method: This study suggested design guidelines for ergonomic MWT by focusing on the heights of the upper side and underside, depths of the inside and outside, and width of MWT through anthropometric studies and literature reviews. Afterwards, a new MWT was made using the suggested design guidelines for this study. Five healthy medical technologists participated to evaluate the original MWT and new MWT. All participants took part in the range of motion (ROM) test, electromyography (EMG) muscle activity test, and usability test to validate the suggested guidelines in this study. EMG signals of related muscles (Flexor Carpi Ulnaris, Extensor Carpi Ulnaris, Deltoid Anterior, and Biceps Branchii) were recorded through the surface electromyography system from both the original MWT and the new MWT. The ROM test of the shoulder and elbow flexion was also assessed using motion sensors. Results: The newly designed MWT showed decreased ROMs of the shoulder and elbow up to 22% and 18% compared to the original MWT. The muscle activities in the new MWT also showed a decrease of 13% in Anterior Deltoid, 6% in Biceps Brachii, 5% in Flexor Carpi Ulnaris, and 8% in Extensor Carpi Ulnaris muscle groups, compared to the original MWT. In the usability test, the satisfaction score of the new MWT was also 56.1% higher than that of the original MWT. Conclusion: This study suggested guidelines for designing MWT and validating the guidelines through qualitative and quantitative analyses. The results of motion analysis, muscle activity, and usability tests demonstrated that the newly designed MWT may lead to less physical stress, less awkward posture, and better physical user interface. Application: The recommended guidelines of the MWT would be helpful information for designing an ergonomic MWT that reduces physical loads and improves the performance of many medical technologists.