• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.171-172
• /
• 2014

This is an experimental study on manufacturing of non-cement matrix. Materials like cement and blowing agent in foamed concrete is replaced by by-products from blast furnace slag and paper ash. Sample 43-PS-1 with density showed lowest. The compressive strength test result, showed a similar trend with density. And it showed that compressive strength of the 40-PS-1 was highest.

• 한국운동역학회지
• /
• 제21권3호
• /
• pp.297-308
• /
• 2011

The purpose of this study was to investigate the relationship among isometric and isokinetic muscle strength, lean body mass(LBM) and bone mineral density(BMD) in the elderly. Eleven males(age, 70.27${\pm}$5.78yr; height, 167.36${\pm}$6.68 cm; weight, 68.34${\pm}$8.23 kg) and thirteen female(age, 69.77${\pm}$4.13yr; height, 152.80${\pm}$4.45 cm; weight, 56.86${\pm}$7.40 kg) participated in this study. In all subjects, LBM and BMD segments was measured by using Dual-energy x-ray absorptiometry(DEXA, Lunar DPS-DM, U.S.A.). Maximum isometric and isokinetic muscle strength of flexion and extension at the knee and elbow, ankle, trunk joints were measured by using an isokinetic dynamometer(CON-TREX(R) Multi Joint Testing Module, Switzerland). The results of this study showed that isometric and isokinetic muscle strength was significantly higher in extension than flexion. In the male and female, hamstring to quadriceps strength ratio(H:Q ratio) was increased as contraction velocity increased. BMD was correlated significantly with trunk extension in the male, but not in the female. LBM was correlated significantly in the male and female with knee extension strength. This study suggests that in the elderly muscle strength training program should put more weight on extensor muscles of the body.

• Journal of the Korean Wood Science and Technology
• /
• 제49권5호
• /
• pp.453-461
• /
• 2021

In wood-based composite panels, low-molar ratio (LMR) urea-formaldehyde (UF) resins usually result in reduced formaldehyde emission (FE) at the expense of poor adhesion. However, the FE and adhesion of medium-density fiberboard (MDF) bonded with LMR UF resins were both improved in this study. The modified LMR UF resins with transition metal ion-modified bentonite (TMI-BNT) nanoclay simultaneously improved the FE and adhesion of MDF panels. The modified LMR UF resins with 5% TMI-BNT resulted in a 37.1% FE reduction and 102.6% increase in the internal bonding (IB) strength of MDF panels. Furthermore, thickness swelling and water absorption also significantly decreased to 13.0% and 24.9%, respectively. These results imply that TMI-BNT modification of LMR UF resins could enhance the formation of a three-dimensional network rather than crystalline domains, resulting in improved cohesion.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.169-170
• /
• 2015

This study is the experiment for manufacturing the Lightweight non-cement matrix based on the blast furnace slag, paper ash. Materials like cement and blowing agent in foamed concrete is replaced by by-products fro blast furnace slag and paper ash. Further, the experiment was performed by replacing alkali with nature gypsum and α type gypsum by (0, 5, 10, 15, 20) of weight of alkali (wt.%) in order to reduce the amount of expensive alkali-activator. Consequently, in the case of the density, plain showed the lowest density and it seems that specimen adding nature gypsum 5% has the best compressive strength and flexural strength. It is detemined that the strength is lowered in accordance with the α type gypsum replacement ratio is higher. The research that it can supplement the further intensity seems to be needed.

• Geomechanics and Engineering
• /
• 제2권1호
• /
• pp.19-28
• /
• 2010

This paper describes the compaction and strength behavior of black cotton soil (BC soil) reinforced with coir fibers. Coir used in this study is processed fiber from the husk of coconuts. BC soil reinforced with coir fiber shows only marginal increase in the strength of soil, inhibiting its use for ground improvement. In order to further increase the strength of the soil-coir fiber combination, optimum percentage of 4% of lime is added. The effect of aspect ratio, percentage fiber on the behavior of the composite soil specimen with curing is isolated and studied. It is found that strength properties of optimum combination of BC soil-lime specimens reinforced with coir fibers is appreciably better than untreated BC soil or BC soil alone with coir fiber. Lime treatment in BC soil improves strength but it imparts brittleness in soil specimen. BC soil treated with 4% lime and reinforced with coir fiber shows ductility behavior before and after failure. An optimum fiber content of 1% (by weight) with aspect ratio of 20 for fiber was recommended for strengthening BC soil.

• 한국농공학회지
• /
• 제11권1호
• /
• pp.1604-1615
• /
• 1969

본(本) 실험(實驗)은 cement mortar를 고산용액에 침지(浸漬)시켜 산(酸)의 작용(作用)에 의(依)한 모르타르의 부식(腐蝕)이 모르타르의 물리적성질(物理的性質)에 미치는 영향(影響)을 구명(究明)하여 보다 내산성(耐酸性) 모르타르 또는 콘크리트의 배합설계(配合設計)에 기초자료(基礎資料)를 제시(提示)하고저 시도(試圖)하였던 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 가. 공시체(供試體)는 5cm 입방체(立方體)의 모르타르로서 그 배합비(配合比)(중량(重量))는 1:1, 1:3, 1:5, 1:7, 1:10의 5종(種)을 제작(製作) 사용(使用)하였다. 나. 물리시험(物理試驗)에서는 재령(材令) 7일(日), 28일(日), 3개월(個月), 6개월(個月)의 압축강도시험(壓縮强度試驗)과 5시간(時間) 자비(煮沸)의 흡수율시험(吸水率試驗)을 하였다. 다. 산성시험(酸性試驗)에서는 0.1N-Hcl 용액(溶液)을 사용(使用)하고 7일간격(日間隔)으로 감량(減量)을 7주간(週間) 계속측정(繼續測定)하였다. 라. 물리적(物理的) 제성질(諸性質)인 배합비(配合比), w/c/비(比), 흡수율(吸水率), 압축강도(壓縮强度) 및 밀도간(密度間)의 상호관계(相互關係)는 다음식(式)으로 표시(表示)되었다. 1. 배합비(配合比)와 흡수율(吸水率)과의 관계(關係) Y=1.036X+13.53 여기서 Y : 흡수율(吸水率)(%), X: 배합비(配合比) 2. 배합비(配合比)와 w/c 비(比)와의 관계(關係) Y=0.214+0.204X 여기서 Y:w/c 비(比), X: 배합비(配合比) 3. w/c 비(比)와 흡수율(吸水率)과의 관계(關係) Y=5.01X+12.53 여기서 Y: 흡수율(吸水率)(%) X: w/c비(比) 4. 밀도(密度)와 흡수율(吸水率)과의 관계(關係) Y=50.6-0.0176X 여기서 Y: 흡수율(吸水率)(%) X: 밀도(密度)($kg/m^3$) 5. 밀도(密度)와 w/c 비(比)와의 관계(關係) Y=5.46-0.0024X 여기서 Y: w/c비(比) X: 밀도(密度)($kg/m^3$) 마. 7주간(週間) 0.1N-HCl 용액(溶液)에 침지후(浸漬後) 감량(減量)의 범위(範圍)는 배합비(配合比) 1:1에서 20.4%(最小), 1:10에서 9%(最大)이였다. 바. 감량(減量)과 물리적(物理的) 제성질(諸性質)과의 관계(關係)는 다음식(式)으로 표시(表示)되었다. 1. 감량(減量)과 배합비(配合比)와의 관계(關係) Y=8.59X+8.63 여기서 Y: 감량(減量)(%) X: 배합비(配合比)

• 한국건축시공학회지
• /
• 제11권5호
• /
• pp.452-458
• /
• 2011

활성탄을 혼입한 모르타르의 특성을 분석한 결과 유동성 측면에서는 무치환과 참나무 숯 모두 큰 차이를 보이지 않았고, 강도적인 측면에서는 활성탄을 혼입한 모르타르의 강도가 참나무 숯과 무치환 모르타르에 비해 높게 나타났다. 열적 특성은 치환율이 증가할수록 두 혼화재 모두열전도율이 감소하는 경향을 보여 단열성능이 우수함을 입증하였다. 결과적으로 활성탄을 혼입한 모르타르가 강도와 단열성능이 우수함을 증명하여 기존의 활성탄이 가지고 있는 오염물질 흡착성능과 함께 우수한 건축 마감재로서의 여러 성능이 검증되었다.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.339-344
• /
• 2021

Composite materials offer distinct and unique properties that are not naturally inherited in the individual materials that make them. One of the most attractive composites to manufacture is the aluminum alloy matrix composite, because it usually combines easiness of availability, light weight, strength, and other favorable properties. In the current work, Powder Metallurgy Method (PMM) is used to prepare Al2024 matrix composites reinforced with different mixing ratios of yttrium oxide (Y₂O₃) particles. The tests performed on the composites include physical, mechanical, and tribological, as well as microstructure analysis via optical microscope. The results show that the experimental density slightly decreases while the porosity increases when the reinforcement ratio increases within the selected range of 0 ~ 20 wt%. Besides this, the yield strength, tensile strength, and Vickers hardness increase up to a 10 wt% Y₂O₃ ratio, after which they decline. Moreover, the wear results show that the composite follows the same paradigm for strength and hardness. It is concluded that this composite is ideal for application when higher strength is required from aluminum composites, as well as lighter weight up to certain values of Y₂O₃ ratio.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1734-1737
• /
• 2015

Insulating characteristics of Cl₂-He mixture gases in gas discharges were analysed to evaluate ability of these gases for using in medium voltage and many industries. These are electron transport coefficients, which are the electron drift velocity, density-normalized longitudinal diffusion coefficient, and density-normalized effective ionization coefficient, in Cl₂-He mixtures. A two-term approximation of the Boltzmann equation was used to calculate the electron transport coefficients for the first time over a wide range of E/N (ratio of the electric field E to the neutral number density N). The limiting field strength values of E/N, (E/N)_lim, for these binary gas mixtures were also derived and compared with those of the pure SF₆ gas.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.5-16
• /
• 1996

실리카질 모래에 대한 많은 시험결과로부터 삼축압축시첩과 평면변형시험간의 강도관계를 밀도와 파괴시 유효평균주응력의 함수로 표현하였다. 또한 파괴시 평균주응력과 축차응력간의 응력비가 내부마찰각의 함수로 잘 규정되었으며 그 비는 내부마찰각의 증가에 따라 감소하였다. 또한 중간주응력을 최대주응력과 최소주응력으로써 표현하였으며 이론적인 파괴면의 각도와 평면변형시험에서 관찰된 파괴면의 각도가 비교적 잘 일치함이 확인되었다.