• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.762-765
• /
• 2008

Shotcrete is NATM technique after tunnel excavation as major tunnel support for ground stability, curtail of execution period and reduction of execution expenses instead of general lining method. It is trend using constantly shotcrete lining. This high-strength shotcrete is require to use as constantly shotcrete lining. This brought out the solution of environmental pollution and harmfulness about human. Accordingly, in this study Specimens of strength measurement was made to develop shotcrete possible to develop in early materials with Cement Mineral Accelerator as NATM method construction. It's compared with existing shotcrete material, Unconfined Compression test, flexural strength test were experimented. The fish poison test was experimented to evaluate an influence of environment. On results of test, Unconfined Compressive Strength and flexural strength was equivalent with 28-day strength of existing material. On results of fish poison evaluation research subject material was founded environmentally friendly for existing shotcrete.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.965-975
• /
• 2006

High pressure turbine blades are one of the key components in fossil power plants operated at high temperature. The blade is usually made of 12Cr steel and its operating temperature is above $500^{\circ}C$. Long term service at this temperature causes material degradation accompanied by changes in microstructures and mechanical properties such as strength and toughness. Quantitative assessment of reduction of strength and toughness due to high temperature material degradation is required for residual life assessment of the blade components. Nondestructive technique is preferred. So far most of the research of this kind was conducted with low alloy steels such as carbon steel, 1.25Cr0.5Mo steel or 2.25Cr1Mo steel. High alloy steel was not investigated. In this study one of the high Cr steel, 12Cr steel, was selected for high temperature material degradation. Electrochemical polarization method was employed to measure degradation. Strength reduction of the 12Cr steel was represented by hardness and toughness reduction was represented by change of transition temperature, FATT. Empirical relationships between the electrochemical polarization parameter and significance of material degradation were established. These relationship can be used for assessing the strength and toughness on the aged high pressure blade components indirectly by using the electrochemical method.

• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.723-738
• /
• 2017

Rock is a heterogeneous material, which introduces complexity in the analysis of rock slopes, since both the existing discontinuities within the rock mass and the intact rock contribute to the degradation of strength. Rock failure is often catastrophic due to the brittle nature of the material, involving the sliding along structural planes and the fracturing of rock bridge. This paper proposes an advanced discretization method of rock mass based on block theory. An in-house software, GeoSMA-3D, has been developed to generate the discrete fracture network (DFN) model, considering both measured and artificial joints. Measured joints are obtained from the photogrammetry analysis on the excavation face. Statistical tools then facilitate to derive artificial joints within the rock mass. Key blocks are searched to provide guidance on potential reinforcement measures. The discretized blocky system is subsequently implemented into a discontinuous deformation analysis (DDA) code. Strength reduction technique is employed to analyze the stability of the slope, where the factor of safety can be obtained once excessive deformation of slope profile is observed. The combined analysis approach also provides the failure mode, which can be used to guide the choice of strengthening strategy if needed. Finally, an illustrated example is presented for the analysis of a rock slope of 20 m height inclined at $60^{\circ}$ using combined GeoSMA-3D and DDA calculation.

• 한국지반환경공학회 논문집
• /
• 제11권8호
• /
• pp.49-55
• /
• 2010

병렬터널의 이격거리가 근접할수록 응력집중으로 인하여 필라(pillar)의 파괴 위험이 큰 만큼 필라의 응력 검토 및 필라의 강도를 고려한 필라의 안정성 평가는 병렬터널의 이격거리 검토 시 매우 중요한 사항이다. 본 연구에서는 필라의 안정성을 구하는 방법 중 하나인 수치해석의 요소크기를 검토하여 필라부 안정성 검토에 대한 체계적인 분석을 제안하였다. 그 결과, 강도응력비는 요소크기에 따른 영향이 크게 없었고, 강도강소법에 의한 안전율은 요소가 작을수록 안전율이 작게 나왔다. 특히 지반이 풍화암인 경우 요소크기에 대한 안전율 값 차이가 크므로 지반이 불량한 경우 요소의 크기를 작게하는 것이 안정적인 결과를 나타냈다.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.473-481
• /
• 2016

Thick plate is currently widely used in shipbuilding due to the increasing of size of ships. However, its use has increased welding groove angles and volume. The welder's technique must be good enough to improve productivity while preventing defects. Generally, the groove angle can be reduced to less than a flux-cored arc welding (FCAW) machine setting of $35{\pm}5^{\circ}$, requiring fewer welding passes while maintaining high productivity and reduced heat input. Therefore, welding technique can be prevented by improved mechanical properties and welding deformation. Welding defects such as lack of fusion (LF), lack of penetration (LP) and hot cracking should be considered when reducing the groove angle for related applications. In this study, a welding groove angle of $25{\pm}5^{\circ}$ is verified as suitable for FCAW design and fabrication. The experimental results confirm the effects on the strength characteristics of FCAW weldment when reducing groove angle to improve the productivity of shipbuilding industries.

• 한국지반환경공학회 논문집
• /
• 제5권3호
• /
• pp.51-60
• /
• 2004

Soil Nailing 공법은 국내의 경우 1993년 처음으로 적용된 이후 최근에는 가시설용에서 영구용으로 확대되어 적용되고 있다. Soil Nailing 공법에 있어서 강성 전면벽체는 지반의 변형을 억제하는 역할을 하며, 인접한 건물 또는 지하구조물 등의 손상을 최소화 하기 위한 목적으로 사용되고 있다. 국내의 경우 도심지에 적용되고 있는 Soil Nailing 벽체는 지반의 이완을 최소화하기 위해 H-Pile+토류판, 쉬트파일, SCW 및 JSP 등의 흙막이 벽체와 함께 종종 사용되고 있다. 그러나 전면벽체의 강성을 고려하기 위한 적당한 설계방법에 대한 제시가 없는 실정이어서 안전측에서 벽체의 강성에 의한 구속효과를 무시하여 왔다. 본 연구에서는 Soil Nailing 벽체의 전체 안정성에 벽체의 강성이 미치는 영향을 알아보기 위해 다양한 실내모형실험이 수행되었으며, 전단강도감소기법과 같은 수치해석기법을 이용한 매개변수변화연구도 시도되었다. 매개변수변화연구에서는 전면벽체의 강성의 영향을 알아보기 위해 콘크리트 전면벽체의 두께를 변화시켰다.

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.10-18
• /
• 2001

The spectral analysis of surface waves (SASW) method, which is an in-situ seismic technique, has mainly been developed and used for many years to determine the stiffness profile of layered media (such as asphalt concrete and layered soils) in an infinite half-space. This paper presents a modified experimental technique for nondestructive evaluation of in-place cement mortar compressive strength in single-layer concrete slabs of rather a finite thickness through a correlation to surface wave velocity. This correlation can be used in the quality control of early age cement mortar structures and in evaluating the integrity of structural members where the infinite half space condition is not met. In the proposed SASW field test, the surface of the structural members is subjected to an impact, using a 12 mm steel ball, to generate surface wave energy at various frequencies. Two accelerometer receivers detect the energy transmitted through the medium. By digitizing the analog receiver outputs, and recording the signals for spectral analysis, surface wave velocities can be identified. Modifications to the SASW method includes the reduction of boundary reflections as adopted on the surface waves before the point where the reflected compression waves reach the receivers. In this study, the correlation between the surface wave velocity and the compressive strength of cement mortar is developed using one 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slab of 2,000 psi (140 kgf/$\textrm{cm}^2$) and two 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slabs of 3,000 psi (210 kgf/$\textrm{cm}^2$).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1071-1082
• /
• 2005

In this paper is studied a theoretical approach to predict structural performances and weight reduction rates of a carbody with shell type sections in case that its materials have to be substituted. For the material substitution design of a carbody, bending, axial and twisting deformations are considered under constant stiffness and strength conditions, which utilizes some new indices derived from a structural point of view. The developed indices to measure the weight reduction by the material substitution give good guidelines on conceptual design of carbodies.

• 산업경영시스템학회지
• /
• 제29권2호
• /
• pp.13-19
• /
• 2006

The instance-based learning is a machine learning technique that has proven to be successful over a wide range of classification problems. Despite its high classification accuracy, however, it has a relatively high storage requirement and because it must search through all instances to classify unseen cases, it is slow to perform classification. In this paper, we have presented a new data reduction method for instance-based learning that integrates the strength of instance partitioning and attribute selection. Experimental results show that reducing the amount of data for instance-based learning reduces data storage requirements, lowers computational costs, minimizes noise, and can facilitates a more rapid search.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.18-30
• /
• 2006

In this paper is studied a theoretical approach to predict structural performances and weight reduction rates of a car-body with shell type sections in case that its materials have to be substituted. For the material substitution design of a car-body, bending, axial and twisting deformations are considered under constant stiffness and strength conditions, which utilize some new indices derived from a structural performance point of view. The developed indices to measure the weight reduction by the material substitution give good guidelines on conceptual design of car-bodies.