• 콘크리트학회논문집
• /
• 제13권2호
• /
• pp.114-122
• /
• 2001

본 연구는 제지 슬러지 소각재의 보다 근본적이고 장기적인 처리방안으로 인공경량골재를 제조하여 고부가 자원으로의 개발과 대량으로 처리할 수 있는 기술에 관한 연구이다. 따라서 배합비, 성형 및 소성조건을 달리하여 골재를 제조하고 이에 따른 골재의 물성을 평가하고자 하였다. 실험결과 제지 슬러지 소각재 단독으로는 인공경량골재의 원료로 부적합하여 점토, 플라이 애쉬 등의 부원료의 첨가가 필요하였으며, 적정 배합비는 제지 슬러지 소각재 30~50 % , 점토 30~50 %, 플라이애쉬 0~40 %, 제지 슬러지 0~10 %, 산화철 2~3% 이었다. 또한 본 배합비를 이용하여 절건 비중이 약 0.6~l.4의 다양한 경량골재 제조가 가능하였다. 골재의 물성 시험 결과 10% 세립치 파쇄강도 및 흡수율은 5~10 ton 및 10~20%로 나타나 골재의 물성은 비구조용 및 구조용 인공경량골재로 적합하였으며, 외국제품에 비해서도 거의 동등한 물성을 나타내었다.

• 한국위성정보통신학회논문지
• /
• 제9권2호
• /
• pp.85-90
• /
• 2014

본 논문은 가시광 통신 시스템에서 시스템 성능 향상 위해 광 빔포밍 전송기법을 적용할 때 광 신호 방사 범위 내에 단일 또는 다수의 접속 유저 단말(Rx)을 추적하는 방법에 관한 것이다. 광 빔포밍 전송기법은 RF에서 빔 형성 전송 방법과 매우 유사하여 가시광 통신 시스템의 통신 신호인 가시 광 신호를 유저 단말에게 전송할 때 빔 형성 벡터를 곱하여 특정 유저에게 질 좋은 가시 광 채널을 형성해 주는 기법이다. 이러한 광 빔포밍 전송을 적용하기 위해서는 먼저 가시 광 셀 내에 이동성을 가진 단말을 포함해 접속해 있는 유저 단말의 위치 추적이 필요하다. 따라서 본 논문에서 하나의 가시 광 셀 내에 접속해 있는 유저 단말 추적 방법을 광 AP(Access Point)와 UE(User Equipment) 1:1 샘플을 취하여 기술하였고 이러한 UE 추적 방법을 통해 광 빔포밍 전송 기법을 적용했을 때 얻을 수 있는 5~6dB 정도의 SNR 성능 이득을 모의실험을 통하여 확인하였다.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.168-174
• /
• 2005

Nowadays, the companies use polymer materials for many purposes fur they have many advantages. The costs of these materials take up too high a proportion of the overall cost of products that use these materials as their major material. It is advantage for polymer industries to reduce these costs. The microcellular foaming process was developed in the early 1980s to solve this problem and proved to be quite successful. Microcellular foaming process uses inert gases such as $CO_2,\;N_2$. As these gases solve into polymer matrices, many properties are changed. The microcellular foaming process makes the glass transition temperature of polymers to low, and diminish the residual stress of polymer matrices. Besides, the microcellular foaming process has several merits, impact strength elevation, thermal insulation, noise insulation, and raw material saving etc. In previous research, many facts of microcellular foaming process are founded its characteristics. But previous researcher found the characteristics of microcellular foaming process with pure gas, for example $CO_2,\;N_2$ and so on, they did not found the characteristics of microcellular foaming process with one more gases. If one more gases inlet the resin, the characteristics of microcellular foaming process is changed very amazingly. In this paper, discuss on the characteristics of microcellular foaming process wi th gas cocktail about cell morphology.

• Journal of Nutrition and Health
• /
• 제39권2호
• /
• pp.109-114
• /
• 2006

The effects of the erect bipedal stance exercise on bone mass and the biomarkers of bone formation and resorption were investigated in rats. Five-week old rats were assigned into control and exercise groups. The rats of exercise group were weight-bearing-trained for 13 weeks in the cage designed to adjust progressively the height from 26.5 cm to 31.5 cm to force the rats rising an erect bipedal stance for feeding and drinking. There was no significant difference in food intakes between two groups. But body weight gain was significantly increased in control group. The lengths of femur, tibia, humerus and radius were significantly longer in control group than exercise group, but the femur and tibia weights per body weight were significantly higher in exercise group than control group. Also the breaking force of femur and tibia in exercise group were higher than control group significantly. The calcium contents of femur and tibia were significantly increased in exercise group than control group. The activity of bone specific alkaline phosphatase (B-ALP) and the osteocalcin contents of serum (the biomarkers of bone formation) in exercise group were higher than control group, but the carboxyterminal propeptide of type I procollagen (P1CP) contents of serum did not show any difference between two groups. However the urinary deoxypridinolin (DPD) excretion, biomarker of bone resorption, was significantly lower in exercise group than control group. From these results, it has been indicated that the erect bipedal stance exercise enhanced the density and the strength of femur and tibia by increasing biomarkers of bone formation and suppressing a biomarker of bone resorption in rats.

• 한국정보통신학회논문지
• /
• 제25권9호
• /
• pp.1234-1243
• /
• 2021

본 연구에서는 한국 방산분야에서 정부분야 경쟁력 향상을 위하여 미국의 FMS 제도를 모델로 하여 한국형 G to G 방위산업협력을 위한 국제국방산업협력제도 도입 시, 국방산업협력국가 확산이 어떻게 이루어질 것인지를 Bass 모델을 통해 예측한다. 이를 위해 미국의 FMS에 참여한 국가 데이터를 기반으로 수요국가 확산을 설명할 수 있는 확산계수와 모방계수를 추정하였다. 또한 이 계수들에 대하여 미국과 한국의 정부분야 경쟁력 차이와 종합적인 방산 경쟁력 차이를 적용하여 한국의 상황을 고려한 확산 패턴을 예측하였고, 조기에 확산을 이룰 수 있는 방안을 제시한다. 한국은 국제방산시장에서 모방구매자들에게 상대적인 우위를 점할 수 있을 것으로 보이며, 확산을 조기화하기 위해서는 Medium-High급 무기체계에서의 경쟁력을 High급까지 확장시켜야 하며, 미국의 FMS에서 정부가 주도하지 않는 절충교역 분야인 산업협력을 포함한 대안 제공을 강화하여야 한다.

• 대한금속재료학회지
• /
• 제49권8호
• /
• pp.614-618
• /
• 2011

Nanopowders of MgO, $Al_2O_3$ and $SiO_2$ were made by high energy ball milling. The rapid sintering of nanostructured $MgAl_2O_4-Mg_2SiO_4$ composites was investigated by a high-frequency induction heating sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition of grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid for the application of nanomaterials. Highly dense nanostructured $MgAl_2O_4-Mg_2SiO_4$ composites were produced with simultaneous application of 80MPa pressure and induced output current of total power capacity (15 kW) within 2min. The sintering behavior, gain size and mechanical properties of $MgAl_2O_4-Mg_2SiO_4$ composites were investigated.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.891-896
• /
• 2012

Nanopowders of MgO and $TiO_2$ were made by high energy ball milling. The rapid synthesis and sintering of the nanostructured $MgTiO_3$ compound was investigated by the high-frequency induction heated sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid for the application of nanomaterials. A highly dense nanostructured $MgTiO_3$ compound was produced with simultaneous application of 80 MPa pressure and induced current within 2 min. The sintering behavior, gain size and mechanical properties of $MgTiO_3$ compound were investigated.

• Composite Materials and Engineering
• /
• 제3권3호
• /
• pp.167-178
• /
• 2021

In the present paper, the destructive behavior of distilled water, salty water, sulfuric acid, and heat on glass/vinyl ester composites was investigated by experimental methods. Hetron 922 vinyl ester resin and two types of mat and woven glass fibers as the reinforcements were used to fabricate composite test samples. All samples were immersed in distilled water, salty water, and sulfuric acid with three different concentrations. The tests were performed at 20℃ and 70℃ for the exposure duration of 1, 2, 4, and 8 weeks. Bending tests were performed after aging for all composite samples to check the degradation of the bending modulus and strength. The results show that the effect of distilled water, in comparison with salty water, on the degradation of composite samples was significant. On the other hand, almost non-sensitivity of concentrations of salty water on the weight gain of specimens has been observed. In addition, it was also observed that the degradation of samples at 70℃ temperature is much more than that of at 20℃. Also, it was observed that the flexural modulus of virgin specimens exposed to salty water (2% concentration) has been recovered just after two weeks of immersion. Furthermore, in some cases, composite samples under the sulfuric acid solution have lost almost 80% of their mechanical properties.

• 한국가금학회지
• /
• 제48권4호
• /
• pp.319-325
• /
• 2021

In this study, we investigated the effects of feeding diets with different levels of energy and nutrient density on the egg quality of laying hens during the pre-peak and peak periods. A total of 192 (Hy-line brown) laying hens were used in a 15-week trial. The hens were randomly allotted to one of four treatments, each with four replicates (12 hens per replication). We assessed the effects of four level of dietary energy (2,710, 2,850, 2,870 and 2,890 kcal/kg) and three levels of nutrient density (Methionine + Cysteine: 0.56%, 0.85%, 0.80% and Crude Protein: 14.5%, 19%, 18%). Differences in the energy and nutrient density contents of diets showed no significant effect (P>0.05) on the average daily gain, average daily feed intake, feed conversion ratio, egg weight, or egg production of hens during the pre-peak and peak periods. However, hens subjected to 2,890 kcal/kg during the pre-peak period were found to lay eggs with significantly thicker shells, and yolk color was found to be significant enhanced in hens fed this diet during the pre-and peak periods. In contrast, we detected no significant effects of dietary energy or nutrient density on the Haugh unit or eggshell strength. In summary, increasing the energy level of diets from 2,710 to 2,890 kcal/kg was found to have positive effects on the shell thickness and yolk color of eggs produced by laying hens.

• 한국항행학회논문지
• /
• 제26권6호
• /
• pp.487-495
• /
• 2022

본 논문에서는 차세대소형위성2호의 X 대역 합성 개구 레이더(SAR; synthetic aperture radar)에 탑재하기 위한 고출력 송·수신 모듈의 설계 및 개발에 관하여 논한다. 모듈은 X 대역의 대상 주파수 범위에서 100 MHz 의 대역폭을 갖는 고출력 펄스 신호를 출력하며, 수신신호에 대해 저잡음 증폭 기능을 수행한다. 제작된 모듈의 송신경로는 200 watt (53.01 dBm) 이상의 출력 신호 세기, 0.35 dB의 펄스폭 기울기, 송신 신호 출력간 0.04 dB 의 신호 세기 변화 및 1.7 ˚ 의 위상 변화를 갖고, 수신경로는 3.81 dB 의 잡음지수, 37.38 ~ 37.46 dB 의 이득을 가짐으로써, 요구되는 성능을 만족함을 확인하였다. 제작된 모듈은 차세대소형위성2호 비행모델에 장착되어 있으며, 추후 누리호에 탑재되어 발사될 예정이다.