• Physical Therapy Rehabilitation Science
• /
• v.5 no.4
• /
• pp.163-169
• /
• 2016

Objective: The purpose of this study was to investigate the effects of vibration resistance exercise (VRE) in patients with tennis elbow on strength, range of motion (ROM), function, pain and quality of life (QOL). Design: Randomized controlled trial. Methods: Twenty-seven participants were randomly assigned to either the VRE group (n=9), weight resistance exercise (WRE) group (n=9) or control group (n=9). Each group underwent hot compress for 15 minutes and electrotherapy for 15 minutes. The VRE group underwent exercises using a vibrating ball for 5 minutes. The WRE group underwent exercises using dumbbells for 5 minutes. All participants were evaluated on wrist extension strength using a hand-held dynamometer, grip strength level through an electric dynamometer, and ROM through a smartphone goniometer application before and after intervention. Patient-rated tennis elbow evaluation, Visual Analogue Scale and Short Form 8 were measured by questionnaires. Results: There were showed significant differences among the VRE, WRE and control group in wrist extensor muscle and hand grip strength, ROM, elbow function, pain and QOL after intervention (p<0.05). The VRE group showed a greater significant improvement in wrist extensor muscle strength and elbow function compared with the others (p<0.05). The VRE and the WRE groups had a more significant improvement in wrist extensor muscle and hand grip strength, ROM and pain compared with the control group (p<0.05). However, there were no significant differences in QOL among the three groups. Conclusions: Combining VRE with thermotherapy and electrotherapy appears to be more effective in improving wrist extension strength, ROM, elbow function, QOL in tennis elbow patients.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.13 no.2
• /
• pp.21-30
• /
• 2007

Purpose: The purpose of this study was to evaluate effects of lumbar vertebrae mobilization and lumbar stabilizing exercises on the muscle strength. Methods: The subject were sixty healthy adult(30 females. 30 males) two decade from 21 to 35. All subjects randomly assigned the control group, lumbar vertebrae mobilization group, lumbar stabilizing exercises group. lumbar stabilizing exercises group received lumbar stabilizing exercises for 30 minutes, lumbar vertbrae mobilization group received lumbar vertbrae mobilization for 4-5 minutes per day and three times a week during 3 weeks period. BIODEX was used to measure muscle strength. All measurements of each subjects were measured at pre-experiment, after 10 day, and post-experiment. Results: The results of this study were summarized as follows; 1. The flexion strength test of control group, lumbar vertebrae mobilization group, lumbar stabilizing exercises group were no significantly differences at pre-experiment and after 10 days(p> .05), however significantly increased post-experiment(p <.05). The result of analyzed effects of flexion strength test was significantly increased accordining to experiment type(p <.05). 2. The extension strength test of control group, lumbar vertebrae mobilization group, lumbar stabilizing exercises group were no significantly differences at pre-experiment and after 10 days(p> .05), however significantly increased post-experiment(p <.05). The result of analyzed effects of extension strength test was significantly increased accordining to experiment type(p <.05). Conclusion: conclusionally these data suggest that a 3-week lumbar stabilizing exercises improved muscle strength. Additional randomized controlled trials to more fully investigate trement effects and factors that may mediate these effect are needed.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.107-112
• /
• 1998

The objective of this study was to develop a polymer mortar defensive block with high strength and durability using unsaturated polyester resin to complement defects of conventional cement mortar defensive block. Physical and mechanical properties of the polymer mortar defensive block were also investigated. Low absorptivity, high impact strength, and great bending strength of the polymer mortar defensive block was compared with those of the conventional cement defensive block. In conclusion, the polymer mortar defensive block is excellent and useful as industrial products for erosion control works.

• The Journal of Korean Physical Therapy
• /
• v.14 no.1
• /
• pp.1-13
• /
• 2002

The purpose of this study was to investigate the effect of home exercise program on the improvement of muscle strength in the elderly. Subjects were forty members living in Daegu (20 males, 20 females), between 65 and 81 years of age. The subjects were divided into two groups; an experimental group and a control group, and each group included 10 males and 10 females. The subjects for the experimental group were participated in the home exercise program for 8 weeks, between April 2001 and June 2001. The results of this study follow: 1.General characteristics statistically significantly affecting for knee extensor strength were weight, height, right sight vision, diastolic blood pressure, pulse rate, obesity and thigh BMD; vision and thigh BMD were for knee flexor strength 2. After the exercise program, knee extensor strength in the experimental group improved 30.8% (p<0.001), and knee flexor strength improved 23.9% (p<0.001). 3. After the exercise program, there was significant difference in knee extensor strength (p<0.05) and knee flexor strength (p<0.05) between the experimental group and the control group. As a continuous health care for the elderly using this home exercise program could be helpful to enhance health of the elderly and promote their quality of life.

• Computers and Concrete
• /
• v.20 no.3
• /
• pp.283-290
• /
• 2017

The aim of this study is to investigate the effect of the bond strength of self-compacting mortars (SCMS) produced from ground pumice powder (GPP) as a mineral additive. In this scope, six series of mortars including control mix were prepared that consist of 7%, 12%, 17%, 22% and 27% of ground pumice powder by weight of cement. A total of 54 specimens of $40{\times}40{\times}160mm$ were produced and cured at the age of 3, 28 and 90-day for compressive and tensile strength tests and 18 specimens of $150{\times}150{\times}150mm$ mortar were prepared and cured at 28 days for bond strength tests. Flexural tensile strength and compressive strength of $40{\times}40{\times}160mm$ specimens were measured at the curing age of 7, 28 and 90-day. Mini V-funnel flow time and mini slump flow diameter tests were also conducted to obtain rheological properties. As a result of the study, it was observed that the SCMs containing 12% of GPP has the highest bond strength as compared to control and GPP mortars. Compressive strength slightly increased up to 12% of GPP.

• Computers and Concrete
• /
• v.25 no.5
• /
• pp.401-409
• /
• 2020

Artificial neural networks are used as a useful tool in distinct fields of civil engineering these days. In order to control long-term quality of Self-Compacting Semi-Lightweight Concrete (SCSLC), the 90 days compressive strength is considered as a key issue in this paper. In fact, combined artificial neural networks are used to predict the compressive strength of SCSLC at 28 and 90 days. These networks are able to re-establish non-linear and complex relationships straightforwardly. In this study, two types of neural networks, including Radial Basis and Multilayer Perceptron, were used. Four groups of concrete mix designs also were made with two water to cement ratios (W/C) of 0.35 and 0.4, as well as 10% of cement weight was replaced with silica fume in half of the mixes, and different amounts of superplasticizer were used. With the help of rheology test and compressive strength results at 7 and 14 days as inputs, the neural networks were used to estimate the 28 and 90 days compressive strengths of above-mentioned mixes. It was necessary to add the 14 days compressive strength in the input layer to gain acceptable results for 90 days compressive strength. Then proper neural networks were prepared for each mix, following which four existing networks were combined, and the combinatorial neural network model properly predicted the compressive strength of different mix designs.

• Journal of Technologic Dentistry
• /
• v.39 no.3
• /
• pp.153-159
• /
• 2017

Purpose: In this study, a corresponding porcelain coating material was applied to dental Co-Cr metal among PFM. Methods: The bonding strength of the fired specimens was measured by a three-point flexural rigidity test. SEM/EDS was used to observe the surface component of specimens. Results: First, All groups were higher than the minimum bonding strength of 25 MPa specified in ISO 9693 for dental metal-ceramics specimens. Second, The bonding strength of control group(WO) is 44.64 MPa. Experimental group DM was 35.45 MPa and DP was 31.82 MPa(P<0.05). Tukey's HSD tests results have shown that the bonding strength in control group(WO) is higher than that of experimental group(DM, DP). Third, In the case of metal - porcelain bonding strength, the application of opaque porcelain and firing were higher than those of the group treated with degassing process. Conclusion: The bonding strength was higher when the powder opaque porcelain was applied than the paste opaque porcelain.

• PNF and Movement
• /
• v.18 no.1
• /
• pp.55-64
• /
• 2020

Purpose: The purpose of this study was to compare the strength and walking ability of chronic stroke patients following either proprioceptive neuromuscular facilitation (PNF) pattern training with pressure biofeedback units (feedback group) or PNF pattern training without pressure biofeedback units (control group). Methods: Eighteen participants with chronic stroke were recruited from a rehabilitation hospital. They were divided into two groups: a feedback group (n = 8) and a control group (n = 10). They all received 30 minutes of neurodevelopmental therapy and PNF training for 15 minutes five times a week for three weeks. Muscle strength and spatiotemporal gait parameters were measured. Muscle strength was measured by hand-held dynamometer; gait parameters were measured by the Biodex Gait trainer treadmill system. Results: After the training periods, the feedback group showed a significant improvement in hip abductor muscle strength, hip extensor muscle strength, step length of the unaffected limb, and step time of the affected limb (p<0.05). Conclusion: The results of this study showed that proprioceptive neuromuscular facilitation pattern training with pressure biofeedback units was more effective in improving hip muscle strength and walking ability than the proprioceptive neuromuscular facilitation pattern training without pressure biofeedback units. Therefore, to strengthen hip muscles and improve the walking ability of stroke patients, using pressure biofeedback units to improve trunk stability should be considered.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1225-1232
• /
• 2009

This study suggests a structural design process for the upper control arm installed at a vehicle. Static strength and durability are the most important responses in the structural design of a control arm. This study considers the static strength in the optimization process. The inertia relief method for FE analysis is utilized to simulate the static loading conditions. According to the classification of structural optimization, the structural design of a control arm is included in the category of shape optimization. In this study, the metamodel technique using the kriging method is adopted to obtain the minimum weight satisfying the strength constraint. Then, the final design is suggested by considering the durability criteria. The durability assessment is obtained by the index of fatigue durability called the SWT (Smith-Watson-Topper) index. The final optimum shape has been proposed by trial and error method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.330-343
• /
• 1997

Extraoral maxillofacial prostheses are essential for restoring facial structures that are lost as a result of congenital missing, injuries from accidents, surgical treatments of head and neck cancer. Recently, silicone is the most useful material for this purpose and is more advantageous than other maxillofacial prosthetic materials. However, there are some problems for long-term usage of silicone prostheses due to tear and color change. These are major contributing environmental factors to those problems that are such as ultraviolet light, cleansing agents, changes in humidity and successive adhesion and removal. The aim of this study is to evaluate the physical properties and color changes of maxillofacial prosthetic silicone material by those environmental factors using A-2186 silicone material (Factor II, USA) and two pigments, cadmium yellow medium and cosmetic red. Aluminium molds were fabricated according to the ASTM No. D412 & D624 specifications and resulted specimens from molds were fabicated and treated as follows. Control group and experimental I group were fabricated with 0.1% wt. pigment mixing in silicone elastomer and II-1 group, II-2 group of experimental II group were fabricated with 0.2%, 0.3% wt. pigment mixing in silicone elastomer, respectively. Control group was kept in darkroom at room temperature, I-1 group was kept under natural sunlight during 1week, I-2 group was soaked in 20% soap water during 1wk. I-3 group was successively adhered and removed 200 times on inner region of arm using Daro adhesive-33. Experimental II groups were kept in darkroom at room temperature. Instron universal testing machine was used to measure the % elongation, tensile strength, tear strength of control, experimental I, II groups and reflectance spectrophotometer(COLOR EYE-3000, Macbeth, USA) was used to measure the color differences between control group and experimental I group. The results were as follows : 1. When compared with control group, natural weathering group and 20% soap-water soaking group had no significant differences in % elongation(p>0.05). 2. 200 times successive adhesion and removal group, 0.2% wt. pigment group and 0.3% wt. pigment group had significant decreases in % elongation(p<0.05). 3. Natural weathering group, 20% soap-water soaking group and 200 times successive adhesion and removal group had no significant differences in tensile strength (p>0.05). 4. 0.2%, 0.3% wt. pigment groups had significant decreases in tensile strength(p<0.05). 5. Values of all experimental groups were decreased in tear strength. and 200 times successive adhesion and removal group had significant decrease in tear strength(p<0.05). 6. Natural weathering group and 20% soap-water soaking group had significant color differences(${\Delta}E$) and it could be detectable to naked eye(p<0.05). 7. Color differences between control group and 200 times adhesion and removal group were not detectable to the naked eye (${\Delta}E<1.0$).