• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.606-611
• /
• 2014

Recently, LED lighting fixtures for crosswalk become popular in order to recognize the pedestrians at crosswalk, which can enhance the safety of the pedestrian at crosswalk. However, there are several problems related to the LED lighting fixtures for crosswalk, such as a lot of energy consumption due to a constant illumination during night and glaring of pedestrians at the opposite side of crosswalk. In this study, in order to overcome these problems, we have investigated a novel LED lighting fixture for crosswalk, which has two modules with different angles ($60^{\circ}$, $120^{\circ}$). Illuminance of min and max at four-line city street crosswalk shown 50 Lux, 125 Lux, respectively. Illuminance of min and max at eight-line city street crosswalk shown 150 Lux, 200 Lux, respectively. Simulation investigation was optimized design using optical program. Prototype was verified measurement by goniometer system.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.1-8
• /
• 2019

In this paper, we study the BESS of a standalone hybrid street light. The proposed BESS proposed a BESS with the function of efficiently charging irregularly generated power from two or more generators. AC generated by wind power is converted to DC using an AC / DC converter and then to a voltage that can charge the battery through the DC / DC converter. The lack of voltage and current, which is a disadvantage of the MPPT method used in solar power generation, is compensated by the DC value of wind power generation. The compensation method is to convert the DC generated from solar power into a voltage suitable for charging the battery through a DC / DC converter, and then connect the DC generated in wind power in parallel to compensate for the insufficient current to charge the battery in a short time. Allow this to begin. By securing the maximum charging time, the usage time of the stand-alone hybrid street light is huge. Experimental results show that the battery has a short charging time and can be efficiently applied to battery-dependent standalone hybrid street lights.

• 디지털산업정보학회논문지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2021

In this paper, to expand the use of standalone street lights, an algorithm for controlling LED energy consumption was proposed. The proposed method uses an LED module of a standalone street light divided into n zones. This is a method of reducing total power consumption by preventing the increase in power consumption due to high heat generation by weakly operating the entire LED according to the illuminance. When the amount of sunlight decreases, the whole LED operates weakly and then brightens, and unlike streetlight that act as streetlight, a method of dividing LEDs by area and limiting the number of LEDs operating according to illumination intensity was proposed. This is a way to use a lot of time with limited battery capacity by reducing the generation of heat that consumes the most power in streetlight. It is also a method of continuously changing the initial usage area to improve the total usage time of the LED substrate. As a result of the experiment, it was found that the proposed method extends the service time because it generates less heat than the conventional stand-alone streetlight.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1187-1190
• /
• 2004

This paper presents a traveler guidance system that offers 3D street information such as road types, signal light systems, street trees, buildings, etc. We consider 5x4 road system of Gangnam(in Seoul, Korea) as a test area and reflect the traveler's car-driving situation. A web server is constructed to serve traveler's driving path by switching 3D animation scenes automatically. To do batch processing of geometric data for the 3D graphical streets construction, we have extracted major street information from present GIS database and created new GIS file formats (SMF files), which contain data sessions for links, nodes, and facilities. With these files, we can render 3D navigation scenes. A number of vector calculations were performed for the geometrical consistence and texture-mapping method was used for the realistic scene generation. Finally, we have verified the effectiveness of the service by operating a test scenario. We have checked whether traveler's 2D path and 3D navigation are exactly reported after setting specific departure and destination. This system offers us well awareness of streets and takes useful role of traveler guidance.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.117-122
• /
• 2003

Street light facilities, which are easily accessible, can be in danger of electric shock when water percolates the facilities especially in summer. In case deteriorated facilities are not checked regularly, they can cause accidents such as electric shock. We should consider regional characteristics to prevent this kind of accidents. In this paper, we analyzed the problems according to the facilities through the research on the actual conditions. We also analyzed the facilities by region and the standards by the conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.115.5-115
• /
• 2002

In this paper, we introduce a system that detects all kinds of violations at a street intersection such as red light running, speed violation, stop line violation and lane violation by tracking individual vehicles. Two cameras are used for defecting violations. One is an analog camera for real-time tracking and the other is a digital camera for license plate reading. This system is connected to the traffic signal system controller and monitors the red, arrow, yellow and green phases of an approach. Two loops in the road are used to detect vehicle approach and speed. The system takes pictures of all vehicles passing a second loop and tracks the vehicles until they go out a street intersection...

• 산업기술연구
• /
• 제30권B호
• /
• pp.75-81
• /
• 2010

This paper presents the development of LED street light lamp which is controled by central command system. This system includes a lamp unit controller, data repeater and command repeater as well as the LED lamps. These devices enable the individual power control and partial on/off control of the LED lamps by the control repeater through full duplex communication line. Also, they have the ability to control the brightness and period of on/off timing by detecting the car's existence. As a result of this development, it is founded that the performances of the system have been satisfied to apply for the actual road test.

• 한국환경복원기술학회지
• /
• 제22권6호
• /
• pp.1-14
• /
• 2019

Carbon storage is one of the regulating ecosystem services provided by urban street trees. It is important that evaluating the economic value of ecosystem services accurately. The carbon storage of street trees was calculated by measuring the morphological parameter on the field. As the method is labor-intensive and time-consuming for the macro-scale research, remote sensing has been more widely used. The airborne Light Detection And Ranging (LiDAR) is used in obtaining the point clouds data of a densely planted area and extracting individual trees for the carbon storage estimation. However, the LiDAR has limitations such as high cost and complicated operations. In addition, trees change over time they need to be frequently. Therefore, Structure from Motion (SfM) photogrammetry with unmanned Aerial Vehicle (UAV) is a more suitable method for obtaining point clouds data. In this paper, a UAV loaded with a digital camera was employed to take oblique aerial images for generating point cloud of street trees. We extracted the diameter of breast height (DBH) from generated point cloud data to calculate the carbon storage. We compared DBH calculated from UAV data and measured data from the field in the selected area. The calculated DBH was used to estimate the carbon storage of street trees in the study area using a regression model. The results demonstrate the feasibility and effectiveness of applying UAV imagery and SfM technique to the carbon storage estimation of street trees. The technique can contribute to efficiently building inventories of the carbon storage of street trees in urban areas.

• 한국의류학회지
• /
• 제30권8호
• /
• pp.1275-1287
• /
• 2006

This was to confirm the Web-SFAS and street Fashion trend 2005. Korea women's street fashion in 2005 S/S was analyzed by using the Web-SFAS(Street Fashion Analysis System) that was developed and completed in the earlier research. Total 270 women who were sensitive to the fashion were surveyed around in 5 nationwide cities and 9 commercial zones. The analysis results of the questionnaire and image survey in 2005 S/S for each commercial zone is shown as follows: 1. The sequence of care with most interest in producing fashionable shape is in the order of clothes>accessory>hair style>make up>shoes, and it was found that the proper reason for visiting the commercial zone is to meet with friends than shopping. 2. Most preferred item for tops were shirts and T-shirts, while for bottoms were blue jeans of denim material in various colors and designs. The color had the clear winner in white color with the pink or yellow line of colors preferred in all commercial zones. The blue jeans and skirt items were the most dominant with the preference on the blue color. The color and image were diversely favored with light, natural, modern, elegance and warm images. 3. The semi-formal image was preferred in women's street fashion, 2005 S/S in Apgujeong-dong, Hapseong-dong, Myeong-dong, Hongik University area, Dongseong-ro, and the active comfort casual image was preferred by womens in Seo-myeon, Nampo-dong and Sangnam-dong. However the retro image were represented in Daehak-ro specially. The tendency of street fashion for women had the difference of their own trends for each commercial zone, rather then the regional differences for each city with the conspicuous preference of color for the items.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.316-318
• /
• 2014