• 한국해양공학회지
• /
• 제20권2호
• /
• pp.52-58
• /
• 2006

The effect of various environmental conditions on the durability of E-glass fiber/vinylester resin composites have been investigated using the tensile test specimen of strand type. It was found that the durability test method performed by the stand type specimen was more convenient and reliable than other conventional test method. The weight gains increased with the immersion time in both water and alkaline solution, and the Weight gains at $50^{\circ}C$. were much bigger than those at $20^{\circ}C$ in both conditions. The tensile strength decreased with the pass of immersion time in all aqueous solution, and the tensile strength at $80^{\circ}C$ in alkaline solution decreased very steeply at beginning of immersion time. The decrement of tensile strength according to the immersion time in various environmental conditions was mainly caused by the degradation of interface and the damage of glass fiber surface.

• Journal of the Korean Wood Science and Technology
• /
• 제29권1호
• /
• pp.22-30
• /
• 2001

본 연구에서는 배향도가 높은 스트랜드와 무배향성의 파티클을 혼합해서 다양한 층구조의 복합체를 제조하여 각종 탄성률을 측정하여 비교하였으며, 초음파법을 적용하여 이방성 적층재료의 층구조에 기인하는 이방성의 정도를 예측하기 위하여 초음파 전파속도와 복합체 면내의 이방성의 관계에 대하여 검토했다. 그 결과 각층구조 복합체의 정적 휨 탄생률 $E_S$는 동적 탄성률 $E_D$와 거의 일치하였으며 $E_U$는 높게 산출되는 경향을 나타내었다. 초음파법을 이용한 복합체의 최외층 스트랜드의 섬유방향(${\parallel}$)과 직각방향(${\bot}$)의 전파속도의 차는 3층 구조, 7층 구조, PB 순으로 크게 나타나 층구조에 의한 이방성의 정도를 나타내고 있었다. 또한 복합체 면내의 양방향간의 전파속도의 차는 스트랜드 표층구조가 파티클 표층구조보다 큰 값을 나타내었으며 스트랜드의 혼합률이 높을수록 각 방향의 전파속도는 빨라지는 경향이었다. 이와는 반대로, 복합체의 두께방향의 전파속도는 파티클 표층구조와 스트랜드의 혼합률이 작을수록 빨라지는 경향을 나타내었다.

• Geomechanics and Engineering
• /
• 제15권5호
• /
• pp.1061-1070
• /
• 2018

The main purpose of retaining wall methods for deep excavation is to keep the construction site safe from the earth pressure acting on the backfill during the construction period. Currently used retaining wall methods include the common strut method, anchor method, slurry wall method, and raker method. However, these methods have drawbacks such as reduced workspace and intrusion into private property, and thus, efforts are being made to improve them. The most advanced retaining wall method is the prestressed wale system, so far, in which a load corresponding to the earth pressure is applied to the wale by using the tension of a prestressed (PS) strand wire. This system affords advantages such as providing sufficient workspace by lengthening the strut interval and minimizing intrusion into private properties adjacent to the site. However, this system cannot control the tension of the PS strand wire, and thus, it cannot actively cope with changes in the earth pressure due to excavation. This study conducts a preliminary numerical analysis of the field applicability of the controllable prestressed wale system (CPWS) which can adjust the tension of the PS strand wire. For the analysis, back analysis was conducted through two-dimensional (2D) and three-dimensional (3D) numerical analyses based on the field measurement data of the typical strut method, and then, the field applicability of CPWS was examined by comparing the lateral deflection of the wall and adjacent ground surface settlements under the same conditions. In addition, the displacement and settlement of the wall were predicted through numerical analysis while the prestress force of CPWS was varied, and the structural stability was analysed through load tests on model specimens.

• 한국안전학회지
• /
• 제13권1호
• /
• pp.13-18
• /
• 1998

It is well known in the fracture mechanics community that the fracture toughness of brittle materials, such as ceramics, can be improved improves significantly when fibers are added into the material. This is because in presence of fibers the cracks cannot propagate as freely as it can in absence of them. Fibers bridge the gap between two adjacent surfaces of the crack and reduce the crack tip opening displacement, thus make it harder to propagate. Several investigators have experimentally studied how the length, diameter and volume fraction of fibers affect the fracture toughness of chopped strand reinforced matrix composite materials. In this paper, matrix used ALS, Arizona Lunar Simulant, types of fiber used carbon steels and stainless steels. To analyze quantitatively fiber reinforced ALS composites, experimental and analytical methods was progressed. Load-displacement curve is used to experimental method, and FEM analysis program using ABAQUS is used analytical method.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.70-74
• /
• 2010

For each strand of wirerope sling, the international standards, ISO-8794, EN-13414 specify that the splice shall have five series of load carrying tucks. At least three of the load carrying tucks shall be made with the whole strand. And, the breaking force of the splice shall not be less than 70% or 80% of that of rope. But, There are no prescriptions for splicing types against different efficiency of each splicing type being used many workplace. In this study, analysis the work limit load efficiency according to variation of number of tucks and splicing types by experimental method As a result, the number of tucks 3+2 had the highest breaking efficiency.

• Journal of Microbiology
• /
• 제37권3호
• /
• pp.154-158
• /
• 1999

The arginine residue at position 243 (Arg 243) of the yeast transcription factor, Gcn4p, is invariably conserved among bZIP transcription factors. Using site-directed oligonucleotide saturation mutagenesis involving two-step polymerase chain reaction (PCR) amplification, random mutations were successfully introduced at the codon of 243 in the basic domain of Gcn4p. This mutant library was transformed ito Gcn4p defective yeast strain and selected for the transcriptionally active colonies. All colonies which were transcriptionally active had arginines in the codon 243. In this study, the strand preference by Taq polymerase during mutagenesis was also tested. Oligonucleotides were specially designed to test whether or not the polymerase was preferred using the strand as a template. A population of randomly mutated products were cloned into an appropriate vector and characterized by DNA sequencing analysis. Saturation mutagenesis which was performed efficiently by this method revealed a strong bias in terms of strand preference of Taq polymerase by an approximate ratio of 3 to 1 in this study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1869-1871
• /
• 2001

DNA 센서의 중요한 역할 중의 하나는 염기서열을 분석함으로써 유전적인 질병이나 돌연변이를 찾아낸다는 점이다. 염기서열 분석법으로 질량, 광학, 전기 화학적 측정법 등이 있는데, 그 중 전기 화학적 측정방법이 타 방법에 비해 간편하고 비용도 저렴해서 전망이 매우 밝다. 전기 화학적 측정을 위해서는 전극의 표면 처리 공정과 전극 표면에서의 DNA immobilization, hybridization 공정 및 전기적 신호를 발생시키는 intercalator, 그리고 전기적 신호 검출을 위한 측정 장비가 필요하다. 본 논문에서는 전극의 표면 처리 물질로서 2-mercaptoethanol을 사용했고 double strand DNA의 intercalator로써 methylene blue를 사용했으며, methylene blue의 환원 전류값을 측정하여 double strand DNA를 bare Au 또는 single strand DNA와 구분할 수 있었다. 이러한 연구 결과를 토대로 하여 전기 화학적 신호 검출을 이용한 DNA 센서의 가능성과 개발 방향을 제시하고자 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권3호
• /
• pp.207-215
• /
• 2004

본 연구에서는 손상된 기존 철근콘크리트 보에 대한 보강공법 중의 하나인 외부 프리스트레싱 보강공법과 긴장재로 사용되는 강연선 또는 CFRP(Carbon Fiber Reinforced Plastic)판을 적용하여 그 보강효과를 파악하기 위한 구조실험을 수행하였다. 구조실험 결과를 분석하여, 본 연구에서 사용한 재료의 경우에 어느 정도의 강성증가 효과와 연성증진 효과를 발휘하는가를 파악하였다. 그 결과, 강연선과 CFRP로 보강한 각각의 경우에 무보강 시험체를 기준으로 57%와 75%의 강도증진 효과를 나타내었다.

• Advances in Computational Design
• /
• 제4권3호
• /
• pp.251-272
• /
• 2019

This study performed lateral load testing on seventeen wood wall frames in two sections. Section one included eight tests studying structural foam sheathing of shear walls subjected to monotonic loads following the ASTM E564 test method. In this section, the wood frame was sheathed with four different types of structural foam sheathing on one side and gypsum wallboard (GWB) on the opposite side of the wall frame, with Simpson HDQ8 hold down anchors at the terminal studs. Section two included nine tests studying wall constructed with oriented strand board (OSB) only on one side of the wall frame subjected to gradually applied monotonic loads. Three of the OSB walls were tied to the baseplate with Simpson LSTA 9 tie on each stud. From the test results for Section one; the monotonic tests showed an 11 to 27 percent reduction in capacity from the published design values and for Section two; doubling baseplates, reducing anchor bolt spacing, using bearing plate washers and LSTA 9 ties effectively improved the OSB wall capacity. In comparison of sections one and two, it is expected the walls with structural foam sheathing without hold downs and GWB have a lower wall capacity as hold down and GWB improved the capacity.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.43-49
• /
• 2007

A new electric coil design methodology using the notion of topology optimization is developed. The specific design problem in consideration is to find optimal coil configuration that maximizes the Lorentz force under given magnetic field. Topology optimization is usually formulated using the finite element method, but the novel feature of this method is that no such partial differential equation solver is employed during the whole optimization process. The proposed methodology allows the determination of not only coil shape but also the number of coil turns which is not possible to determine by any existing topology optimization concept and to perform single coil strand identification algorithm. The specific applications are made in the design of two-dimensional fine-pattern focusing coils of an optical pickup actuator. In this method, the concept of equivalent magnetizing current is utilized to calculate the Lorentz force, and the optimal coil configuration is obtained without any initial layout. The method is capable of generating the location and shape of turns of coil. To confirm the effectiveness of the proposed method in optical pickup applications, design problems involving multipolar permanent magnets are considered.