• Journal of Microbiology and Biotechnology
• /
• v.30 no.5
• /
• pp.739-748
• /
• 2020

In this study, a method of heat adaptation was implemented in an attempt to increase the upper thermal threshold of two Streptococcus thermophilus found in South Korea and identified the alterations in membrane fatty acid composition to adaptive response to heat. In order to develop heat tolerant lactic acid bacteria, heat treatment was continuously applied to bacteria by increasing temperature from 60℃ until the point that no surviving cell was detected. Our results indicated significant increase in heat tolerance of heat-adapted strains compared to the wild type (WT) strains. In particular, the survival ratio of basically low heat-tolerant strain increased even more. In addition, the strains with improved heat tolerance acquired cross protection, which improved their survival ratio in acid, bile salts and osmotic conditions. A relation between heat tolerance and membrane fatty acid composition was identified. As a result of heat adaptation, the ratio of unsaturated to saturated fatty acids (UFA/SFA) and C18:1 relative concentration were decreased. C6:0 in only heat-adapted strains and C22:0 in only the naturally high heat tolerant strain were detected. These results support the hypothesis, that the consequent increase of SFA ratio is a cellular response to environmental stresses such as high temperatures, and it is able to protect the cells from acid, bile salts and osmotic conditions via cross protection. This study demonstrated that the increase in heat tolerance can be utilized as a mean to improve bacterial tolerance against various environmental stresses.

• Journal of Life Science
• /
• v.29 no.8
• /
• pp.916-921
• /
• 2019

In this study, we constructed a biological system that exhibited thermotolerance, ethanol tolerance, and increased ethanol productivity using a random mutagenesis method. We attempted to isolate a thermotolerant mutant using proofreading-deficient DNA polymerase ${\delta}$ and ${\varepsilon}$ encoded by the pol3 and pol2 genes, respectively, in Saccharomyces cerevisiae. To obtain mutants that could grow at high temperatures ($38^{\circ}C$ and $40^{\circ}C$), random mutagenesis of AMY410 (pol2-4) and AMY126 (pol3-01) strains was induced. The parental strains (AMY410 and AMY126) grew poorly at temperatures higher than $38^{\circ}C$. By stepwise elevation of the incubation temperature, AMY410-Ht (heat tolerance) and AMY126-Ht strains that proliferated at $40^{\circ}C$ were obtained. These strains were further incubated in medium containing 6% and 8% ethanol and then AMY410-HEt (heat and ethanol tolerance) and AMY126-HEt strain with ethanol tolerance at an 8% ethanol concentration was obtained. The AMY126-HEt strain grew even at an ethanol concentration of 10%. Furthermore, following the addition of high concentrations of glucose (5% and 10%), an AMY126-HEt3 strain with increased ethanol productivity was isolated. This strain produced 24.7 g/l of ethanol (95% theoretical conversion yield) from 50 g/l of glucose. The findings demonstrate that a new biological system (yeast strain) showing various phenotypes can be easily and efficiently bred by random mutagenesis of a proofreading- deficient mutant.

• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.344-354
• /
• 2020

Identification of the target species of 2-MIB (2-methyllisoborneol) production is crucial in the management of off-flavor problem in the freshwater system. This study was conducted to identify 2-MIB-producing Pseudanabaena strains occurring in the North Han River system using molecular genetic method. Eleven phenotypes of Pseudanabaena were isolated from several mainstream sites of the North Han River, including Sambong-ri, Joam-myun, and Lake Uiam areas. Despite of morphological similarity of the strains, the phylogenetic analysis using 16S rDNA classified them into different species with low genetic similarity (40~55%). Isolated Pseudanabaena strains were converged to four species; Pseudanabaena cinerea, P. yagii, P. mucicola, and P. redekei. Among them, the 2-MIB synthesizing gene (mibC) was detected in P. cinerea, P. yagii, and P. redekei. However, actual 2-MIB production was detected only in P. cinerea and P. redekei based on gas chromatography analysis. This study is the first report of the molecular identification of Pseudanabaena strains and their 2-MIB production potential in Korea. The results of this study provides an evidence of species diversity of Pseudanabaena occurring in the North Han River.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.57-60
• /
• 2001

In order to extend the life time of building and civil infra-structure, nowadays, patch type fibrous composite materials are widely used. Retrofitted concrete columns and beams gain the stiffness and strength, but they lose toughness and show brittle failure. Usually, the cracks of concrete structures are visible with naked eyes and the status of the structure in the life cycle is estimated with visible inspection. After retrofitting of the structure, crack visibility is blocked by retrofitted composite materials. Therefore, structural monitoring after retrofitting is indispensible and self diagnosis method with optical fiber sensor is very useful. In this paper, We try to detect peel out effect and find the strain difference between main structure and retrofitting patch material when they separate each other.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.9
• /
• pp.1287-1292
• /
• 2013

Extracellular biogenic synthesis of silver nanoparticles with various shapes using the rice bacterial blight bacterium Xanthomonas oryzae pv. oryzae BXO8 is reported. The synthesized silver nanoparticles were characterized by UV-Vis spectroscopy, powder X-ray diffractometry (XRD), scanning electron microscopy, energy dispersive X-ray spectrometry, and high-resolution transmission electron microscopy (HR-TEM). Based on the evidence of HR-TEM, the synthesized particles were found to be spherical, with anisotropic structures such as triangles and rods, with an average size of 14.86 nm. The crystalline nature of silver nanoparticles was evident from the bright circular spots in the SAED pattern, clear lattice fringes in the high-resolution TEM images, and peaks in the XRD pattern. The FTIR spectrum showed that biomolecules containing amide and carboxylate groups are involved in the reduction and stabilization of the silver nanoparticles. Using such a biological method for the synthesis of silver nanoparticles is a simple, viable, cost-effective, and environmentally friendly process, which can be used in antimicrobial therapy.

• Applied Biological Chemistry
• /
• v.41 no.8
• /
• pp.605-607
• /
• 1998

A total of 28 traditional drinks derived from 23 plant species in 19 families were tested for their in vitro growth-inhibiting effects against Bifidobacterium adolescents, Bifidobacterium bifidum, Lactobacillus acidophilus, Lactobacillus casei, Clostridium perfringens, and Escherichia coil using a paper disc agar diffusion method under anaerobic condition. The responses varied with bacterial strain, plant species and tissue sampled. In a test with C. perfringens at 5 and 10 mg/disc, potent growth inhibition was produced from the extracts of Eucommia ulmoides stems, Pinus densiflora leaves and shoots, Thea sinensis leaves (green and oolong teas) and Zingiber officinale roots. All materials tested did not adversely affect the growth of bifidobacteria, lactobacilli, and E. coli. These results may be an indication of at least one of the pharmacological activities of these plant-derived drinks.

• Advances in Computational Design
• /
• v.3 no.2
• /
• pp.201-212
• /
• 2018

Decrease in availability of suitable subbase and base course materials for highway construction leads to a search for economic method of converting locally available troublesome soil to suitable one for highway construction. Present study insights on evaluation of benefits of stabilization of subgrade soils in term of extension in service life (TBR) and layer thickness reduction (LTR). Laboratory investigation consisting of Atterberg limit, Compaction, California Bearing Ratio, unconfined compressive strength and triaxial shear strength tests were carried out on two types of soil for varying percentages of stabilizers. Vertical compressive strains at the top of unstabilized and stabilized subgrade soils were found out by elastoplastic finite element analysis using commercial software ANSYS. The values of vertical compressive strains at the top of unstabilized and stabilized subgrade, were further used to estimate layer thickness reduction or extension in service life of the pavement due to stabilization. Finite element modeling of the flexible pavement layered structure provides modern technology and sophisticated characterization of materials that can be accommodated in the analysis and enhances the reliability for the prediction of pavement response for improved design methodology. If the pavement section is kept same for unstabilized and stabilized subgrade soils, pavement resting on lime, fly ash and fiber stabilized subgrade soil B will have service life 2.84, 1.84 and 1.67 times than that of unstabilized pavement respectively. The flexible pavement resting on stabilized subgrade is beneficial in reducing the construction material. Actual savings would depend on the option exercised by the designer for reducing the thickness of an individual layer.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.5
• /
• pp.133-143
• /
• 2019

Various problems regarding the wet floor method such as its complicated process and waste of thermal storage have been raised, but the usage of dry floor recommended for long-life housing has declined due to lack of confidence on the performance of dry floor. The purpose of this study is to secure the credibility of dry floor. Under this purpose, this study considered precedent studies and established directions to secure the performance of long-life housing infill, and thus, 9 performance items (Impact sound, Smoothness, thermal comfort, sensation hardness while walking, falling safety, impact resistance, local compression load, local strength and strain at heating) were drawn. In addition, the experiment was carried out for 5 performances except for legal performance, some dry floor performances and whole spatial performance. As a result, an appropriate result from all performances except was obtained. The performance of dry floor was verified for each item from these results and it is expected to use such results as basic data on dry floor in the future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.765-770
• /
• 2017

GTD111 DS of nickel base superalloy has been used for gas turbine blades. In this study, low cycle fatigue test was conducted on the GTD111 DS alloy by setting conditions similar to the real operating environment. The low cycle fatigue tests were conducted at room temperature, $760^{\circ}C$, $870^{\circ}C$, and various strain amplitudes. Test results showed that fatigue life decreased with increasing total strain amplitude. Cyclic hardening response was observed at room temperature and $760^{\circ}C$; however, tests conducted at $870^{\circ}C$ showed cyclic softening response. Stress relaxation was observed at $870^{\circ}C$ because creep effects occurred from holding time. A relationship between fatigue life and total strain range was obtained from the Coffin-Manson method. The fratography using a SEM was carried out at the crack initiation and propagation regions.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.2
• /
• pp.121-128
• /
• 2016

The mechanical jointing method is very important in the machine parts and structure. They are used by the bolts and rivet because it is very convenient to replace the parts and the structure. However, the mechanical jointing methods using the bolt and rivet needed the open hole. The machine parts life cycle is reduced because this open hole created the stress concentration. Therefore, the measurement methods are needed to evaluate phenomenon of the stress concentration. This paper discusses the development of the measurement algorithm using the digital image correlation methods to measure the strain distribution of the open hole. To implement the measurement algorithm using the DIC, the LabVIEW 2010 programming tool was used. To measure the strain distribution of the open hole, the tensile specimens having an open hole are made by using the aluminum 6061-T6. To secure the reliability of measurement result using the DIC, the DIC measurement results and FEM analysis results were compared.