• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.25-33
• /
• 2020

To investigate the relationship between strain distribution and tensile properties of brittle material, five types of tensile coupon of carbon fiber reinforced polymer (CFRP) modified the tab portion in order to have a strain distribution including S0, SD1, SD2, SV1, SV2 were tested. The ultimate stress and strain of SD2 and SV2 which was intended to have larger strain distribution were smaller than those of SD1 and SV1, that was more clearly shown in the test results of the symmetric coupons (SV series) than the asymmetric coupons (SD series). In addition, the ultimate stress and strain of most coupons with strain distribution in this study were decreased when compared to the control group with uniform strain. These results were analyzed in various ways through 1) the average of the strain values directly measured by the strain gages, 2) the converted strain calculated by dividing the total deformation by the effective length, and 3) the ultimate effective strain derived from both the elastic modulus and the ultimate load. The values measured by strain gage indicates response of the local region precisely, but it does not represent the response from whole section. However, the converted strain and effective strain can supplement disadvantage of gage because they represent the average response of whole section. In particular, the effective strain can provide rupture strain conservatively, which can be utilized in practice, when the value obtained by strain gage was not effective due to gage damage or abnormal gage readings near ultimate load. This value provides a value that can be used even when partial rupture has occurred and is reasonably useful for specimens with strain distribution.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.663-669
• /
• 2013

To improve the use of ginseng flower-buds, antioxidant activities of ginseng flower-buds fermented using a variety of useful microorganisms were analyzed. Non-fermented grape pomace was used as a control, while fermentation was carried out using Bacillus subtilis (BS), Lactobacillus plantarum (LP), Lactobacillus casei (LC), Candida utilis (CU), Saccharomyces cerevisiae strain CHY1011 (Y1), Saccharomyces cerevisiae strain ZP 541 (Y2), and a mixed-strain culture with LP, LC, and CU (M). The total polyphenol content of ginseng flower-buds was highest in the control compared to the other fermented ginseng flower-buds. DPPH radical and ABTS radical scavenging activity were also highest in fermented group by BS. The FRAP value (10 mg/mL) was highest in the control group but did not show a significant difference in the fermented group by BS. The highest reducing power activity was in the fermented group by LC compared to the other group, including the control. Therefore, the fermentation of ginseng flower-buds using various microorganisms, shows that fermentation with the Bacillus subtilis strain increases antioxidant activity. More research of its effects on other physiological activities will be needed.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.429-444
• /
• 1998

Objective of this study was to select ectomycorrhizal fungi for black spruce(Picea mariana) inoculation to overcome the growth inhibitory effects of Kalmia angustifolia. Nineteen isolates representing 11 species of ectomycorrhizal fungi were tested for their abilities to grow and form mycorrhizae with black spruce seedlings in the presence of water leachate of leaves of Kalmia. Mycelium growth of 9 isolates were inhibited by the leaf leachate. Colony diameter and biomass of the other 10 isolates were either increased or unaffected under the same conditions. Acidic pH of the culture medium(pH 3 and 4) inhibited some of the fungi, but a combination of acidic pH and the leaf leachate was more inhibitory. Thirteen isolates were able to form ectomycorrhizae with black spruce in presence of 25% leaf leachate in pure culture. Four isolates, Paxillus involutus(NF4), Cenococcum geophilum(GB12), Laccaria laccata(GB23), and E-strain(GB45) formed mycorrhizae more successfully than the others in presence of up to 50% Kalmia leaf leachate. Black spruce seedlings pre-inoculated with these fungi were grown with Kalmia leaf leachate and live Kalmia plants during a four month greenhouse experiment. Abundant mycorrhizae(77-91% of root tips) were developed on seedlings pre-inoculated with P. involutus, L. laccata and E-strain but relatively poor mycorrhization(32% of root tips) resulted with C. geophidum. Over 90% of the short root mycorrhizae were attributed to the inoculated fungi although indigenous mycorrhizae also occurred on most seedlings. Persistence of the mycorrhizae was not affected by living Kalmia plants. Over 80% of the mycorrhizae on seedlings inoculated with P. involutus, L. laccata and E-strain and 53% of the mycorrhizae on seedlings inoculated with C. geophilum were attributable to the inoculant fungi. Control seedlings formed about 45% ectomycorrhizal short roots with indigenous fungi. The L. laccata and C. geophilum inoculated seedlings exhibited enhanced mycorrhizae formation in presence of Kalmia leaf leachate. Mycorrhizae formation with inoculant fungi was 4-15% lower at pH 4 than at pH 5, with the greatest inhibition occurring for L. laccata. Seedlings inoculated with P. involutus had the greatest shoot and root growth followed by L. laccata and E-strain inoculated seedlings. The P. involutus and L. laccata inoculated seedlings were significantly taller with more shoot dry biomass than the uninoculated(control) seedlings. E-strain inoculated seedlings had significantly higher shoot dry biomass and significantly lower number of first order lateral roots compared to the control but other growth parameters such as height, root dry weight and number of short root tips were not significantly different from the control. Seedlings inoculated with C. geophilum were not significantly different from the uninoculated seedlings in any of the growth parameters except for the number of first artier lateral roots which was significantly less than the control seedlings.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.33 no.1
• /
• pp.15-23
• /
• 2016

One major constraint in the development and implementation of a successful and cost-effective area-wide integrated pest management (AW-IPM) programme with a SIT component for Bactrocera oleae (Diptera: Tephritidae) is the ability to produce a large number of high quality mass-reared individuals. The aim of this study was to develop a more efficient and practical egg collection system in an attempt to improve the mass-rearing of this species. The following basic parameters were examined: egg production per female, egg hatch, pupal recovery, pupal weight, adult emergence and percentage of fliers. Three different strains (Israel wild-type, France wild-type, and Greece laboratory) were tested and each strain was evaluated for six generations. Female flies of the Israel strain produced significantly more eggs per female than the other two strains, but egg hatch was significantly lower. Egg hatch of the France wild type and the Greece laboratory strain was similar. For all other parameters, there was no significant difference between strains; however, there was a significant generational effect for all parameters observed. As a result of this study, a protocol was developed for the mass-rearing of this species that included the use of large adult holding cages that could house up to 96,000 flies per cage. The newly developed method of egg collection using a flat wax panel as one of the sides of an adult holding cage proved to be cost-effective, efficient, making colony growth easier for industrial mass-rearing.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.4
• /
• pp.505-512
• /
• 1999

Objectives : The purpose of this study was to assess the relationship between job strains and absenteeism from work. Methods : The study design was cross-sectional, and the study subjects consisted of 1,166 workers who were employed in the small-sized industries. A self administered questionnaire was used to measure the general characteristics, job characteristics(job demand, job control), and social support(coworker support, supervisor support) at work. The Job Content Questionnaire(JCQ) was used to assess job demand(2 items) and decision lattitude(10 items). Social support at work (10 items) was measured using JCQ. Sick absence was collected using self-report and were rechecked by the attendance record of their company. Odds ratios and 95% confidence intervals for the association between job strain and sick absence were estimated. The modifying effect of social support was evaluated by stratification. Logistic regression was used to estimate the relationship between job strain and sick absence. Results : In the bivariate analysis, the variables related to sick absence were age, marital status, occupation, job demand. Four distinctly different kinds of level of job strain were generated by the combination of job demand and job control: low strain group, high strain group, active group, and passive group. The crude odds ratio of high job strain was 1.78(95% CI: 1.26-2.53), and those of active group and passive group were 1.33(95% CI: 1.07-1.66) and 1.13 (95% CI: 0.88-1.47), respectively. The odds ratio of high job strain after adjusting for age and occupation were still significant The odds ratio of high job strain in low social support was 5.96(95% CI: 2.45-14.51), but that in high social support was 0.73(95% CI: 0.26-2.01). Conclusions : Job strain was associated with increased risk of absenteeism from work, and social support at work modified the association between job strain and sick absence.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.609-615
• /
• 2005

The safety and immunogenicity of an attenuated recombinant Salmonella vaccine strain, Salmonella enterica serovar Typhimurium llaB, was assessed. This vaccine strain could survive in low pH condition, and its ability of intracellular survival did not differ from that of S. enterica serovar Typhimurium UK1, which is the wild-type of the vaccine strain. The mortality of the mice orally administered with the vaccine strain was $50\%$ at the dose of $10^7$ CFU. All mice administered with $10^5\;or\;10^3$ CFU of the vaccine strain survived for 3 days postinoculation (pi). However, all mice administered with more than $10^3$ CFU of the vaccine strain died within 3 days pi. To examine the protective effect of the vaccine strain, mice were orally immunized with $10^4\;and\;10^6$ CFU of the bacteria. Control mice were given with 0.5 ml of phosphate buffered saline (PBS). After 8 days, the mice were challenged with $10^9$ CFU of S. enterica serovar Typhimurium UK1, and mortality was examined for 5 days. The survival rates of the mice immunized with $10^4\;and\;10^6$ CFU of the vaccine strain were $60\%\;and\;80\%$, respectively, whereas all control mice died within 2 days after challenging. To investigate the immunogenicity of S. enterica serovar Typhimurium llaB, mice were orally immunized with $10^5\;or\;10^6$ CFU ml of the vaccine strain. Five mice of each group were sacrificed at 5 and 12 days after immunization, and results showed that immunization of the vaccine strain led to increases of IgG1, IgG2, and IgM titers against S. enterica serovar Typhimurium UK1 in mouse sera, cytokine expressions such as IL-2, IL-4, IL-6, and IL-10 in spleen, and the lymphocyte proliferation response to mitogens (concanavalin A or LPS) stimulation.

• Steel and Composite Structures
• /
• v.18 no.1
• /
• pp.29-50
• /
• 2015

With a quasi-three point bending apparatus, ratcheting deformation is studied experimentally on a pressurized austenitic stainless steel Z2CND18.12N pipe under bending load and vertical displacement control, respectively. The characteristic of ratcheting behavior of straight pipe under both control methods is achieved and compared. The cyclic bending loading and internal pressure influence ratcheting behavior of pressurized straight pipe significantly under loading control and the ratcheting characteristics are also highly associated with the cyclic displacement and internal pressure under displacement control. They all affect not only the saturation of the ratcheting strain but the ratcheting strain rate. In addition, ratcheting simulation is performed by elastic-plastic finite element analysis with ANSYS in which the bilinear model, Chaboche model, Ohno-Wang model and modified Ohno-Wang model are applied. By comparison with the experimental data, it is found that the CJK model gives reasonable simulation. Ratcheting boundaries under two control modes are almost same.

• Korean Journal of Agricultural Science
• /
• v.44 no.4
• /
• pp.558-565
• /
• 2017

This study was conducted to determine the effect of inoculation of microorganism isolated from pig feces on nutrient contents of fermented hulless barley. The microbial flora in feces of a total of four crossbred piglets ($Landrace{\times}Yorkshire{\times}Duroc$) was analyzed by 16s rRNA sequencing. The most abundant strain was then selected for fermentation of hulless barley. Lactobacillus plantarum (L. plantarum) was dominant (64.56%) in intestinal microbial flora in the pig feces. The selected candidate strain showed significantly higher survival rate at pH 7 than at pH 2.5 and 3.0 (p < 0.05). Incubated culture containing the candidate strain showed an increased growth rate with lower pH levels after 7.5 h incubation compared to initial incubation period (p < 0.05). When compared with commercial multiple probiotics which were used as control, the selected strain showed faster growth rate at 5 h post-incubation (p < 0.05). During the fermentation period, neither inoculated nor non-inoculated control hulless barley showed any change in pH value. Crude fat, fiber and ash contents were lower (p < 0.05) in hulless barley inoculated by the selected strain compared to control. However, moisture, energy, NDF and ADF were not affected by the inoculation of strain or fermentation period. Lactic acid was increased and acetic acid was decreased in the hulless barley inoculated with the selected strain during the fermentation period (p < 0.05). Taken together, our results suggest that L. plantarum derived from the pigs could be utilized as a new microorganism for manufacturing fermented feed stuffs.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.6
• /
• pp.501-517
• /
• 2011

In general, the tunnel stability during excavation is assessed by comparing measured displacements at roof and sidewall to control criteria. The control criteria were established based on the past experience that considered ground conditions, size of the tunnel cross section, construction method, supports, etc. Therefore, a number of researches on the control criteria using the critical strain have been conducted. However, the critical strain obtained from uniaxial compression tests have drawbacks of not taking damage in rock mass due to increase of stress level and longitudinal arching into account. In this paper, damage-controlled tests simulating stress level and longitudinal arching during tunnel excavation were carried out in addition to uniaxial compression tests to investigate the critical strain characteristics of granite and gneiss that are most abundant rock types in Korean peninsula. Then, the critical strains obtained from damage-controlled tests were compared to those from uniaxial compression tests; the former showed less values than the latter. These results show that the critical strain obtained from uniaxial compression tests has to be reduced a little bit to take stress history during tunnel excavation into account. Moreover, the damage critical strain was proposed to be used for assessment of the brittle failure that usually occurs in deep tunnels.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.116-124
• /
• 2016

PURPOSE. The aim of the present study was to evaluate, by means of strain gauge analysis, the effect of different implant angulations on strains around two implants retaining mandibular overdenture with Locator attachments. MATERIALS AND METHODS. Four duplicate mandibular acrylic models were constructed. Two implants were inserted in the canine regions using the following degrees of distal inclinations: group I (control); $0^{\circ}$, group II; $10^{\circ}$, group III; $20^{\circ}$, and group IV; $30^{\circ}$. Locator pink attachments were used to connect the overdenture to the implants and Locator red (designed for severely angled implants) was used for group IV (group $IV_{red}$). For each group, two linear strain gauges were attached at the mesial and distal surfaces of the acrylic resin around each implant. Peri-implant strain was measured on loading and non-loading sides during bilateral and unilateral loading. RESULTS. For all groups, the mesial surfaces of the implants at loading and non-loading sides experienced compressive (negative) strains, while the distal implant surfaces showed tensile (positive) strains. Group IV showed the highest strain, followed by group III, group II. Both group I and group $IV_{red}$ showed the lowest strain. The strain gauges at the mesial surface of the loading side recorded the highest strain, and the distal surface at non-loading side showed the lowest strain. Unilateral loading recorded significantly higher strain than bilateral loading. CONCLUSION. Peri-implant strains around two implants used to retain mandibular overdentures with Locator attachments increase as distal implant inclination increases, except when red nylon inserts were used.