• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.149-154
• /
• 2010

Intentional draw and fade shots could be good weapons for lowering golf score. But how to make such shots? To investigate deterministic variables generating different projectile paths of shots in square stance was the purpose of this study. Ten right-handed male collegiate athletes, showing 1.3 of averaged handicap, participated in this study. They were asked to intentionally perform three different shots such as the straight shot(control condition), draw shot, and fade shot. Swing path, pelvis rotation angle, thorax rotation angle and left forearm supination angle were determined for dependent variables on impact event at each trial. For statistical analysis one-way repeated measures ANOVA were used. The results showed that swing path was one of main factor making differences among three kind of shots. Straight shot vs. Draw shot, Straight shot vs. Fade shot and Draw shot vs. Fade shot showed differences on swing path. And left forearm supination angle revealed significant difference between draw shot and fade shot, showing a significant larger angle of draw shot than fade shot. No other significant difference was detected for the other variables. We found that the shot characteristics were influenced primarily by swing path and left forearm supination angle.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.634-639
• /
• 2001

The current study addresses experimental and computational work of impulse wave discharged from the exit of two kinds of right-angle pipe bends, which are attached to the open end of a simple shock tube. The weak normal shock wave with its magnitude of Mach number from 1.02 to 1.20 is employed to obtain the impulse wave propagating outside the exit of the pipe bends. A Schlieren optical system visualizes the impulse wave discharged from the exit of the pipe bends at an instant. The experimental data of the magnitude of the impulse wave and its propagating directivity are analyzed to characterize the impulse waves discharged from the exit of the pipe bends and compared with those discharged from a straight pipe. Computational results well predict the experimented dynamic behaviors of the impulse wave. The results obtained show that a right-angle miter bend considerably reduces the magnitude of the impulse wave and its directivity toward to the pipe axis, compared with the straight pipe and right-angle smooth bend. It is believed that the right-angle miter bend pipe can playa role of a passive control against the impulse wave.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.259-278
• /
• 2002

This study divided straight success, pade success and failure with 7male golfers who have experiences more than 3 years, analyzed kinematic factors of golf swing to suggest scientifically. The conclusions were follows. 1) The wrist angle has significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 2) The body twist angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 3) The shoulder joint rotation angle has no significant difference in success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 4) The left hip joint vertical angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 5) The hip joint rotation angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 6) The trunk angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 7 )The left knee joint angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. This study divided golf swing motion of pattern change in straight success, pade success and failure and analyzed the kinematic factors by 3-dimension cinematography to improve performance. In the future, many researchers have to study kinematic analysis to improve performance in every events.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.22-31
• /
• 2014

This paper introduced the new calibration algorithm of a straight-type five-hole pressure probe necessary for calculating three-dimensional flow velocity components. The new velocity data reduction method using both a commercial two-dimensional curve-fitting program and the zone partition method of a calibration map was firstly introduced in this study. This new calibration method can be applied up to the wide flow angle of ${\pm}80^{\circ}$ despite of using a five-hole pressure probe because this data reduction method showed a comparatively good performance in calculating yaw and pitch angles from the calibration map.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.293-309
• /
• 2003

The purpose of this study was to analyze the kinematic variables of the right-straight punch(RSP) in boxing with three-dimensional analysis technical methods. The subjects are boxers who have been playing in national boxing representative team and the RSP is their special favorite technique, The right-straight punches were filmed on 16mm video cameras(30frames/sec.) The kinematic variables were temporal, postural and center of gravity(COG). The mean and the standard deviation of variables have been obtained and used as basic factors for examining characteristics of the RSP by out-boxers. From the data analysis and discussion, the following conclusions have been drawn. 1) Temporal variables It is a significant characteristic that LDJ and KDM s' the amount of elapsed time(EF) needed for both an attack and a defense were similar : ET for stretch-out of attack-arm was $0.52{\pm}0.04\;sec$. and return was $0.54{\pm}0.01\;sec$. Therefore, a defense motion is as important as an attack motion. 2) Posture variables When the subjects performed a RSP, the significant characteristic of the ankle angle was that it wasn't completely returned to the original position after stretching-out. Therefore it is necessary to do supplementary exercises, such as side steps, to move the center of gravity more effectively. The hee angle was not fully stretched either. In regard to the hip angle, it should be rotated with all strength to harmonize with the direction of movement. 3) Center of Gravity(COG) variables When both LDJ and KDM performed a RSP, a significant characteristic was the transformation of sagittal view rather than transverse or frontal views.

• Journal of Fashion Business
• /
• v.11 no.1
• /
• pp.61-74
• /
• 2007

Photographic measurement was first made with the subjects of 190 males in their 20s residing in the Ningbo area, Zhejiang Province in China. In this second report, lower body shapes were classified and discriminated by using indirect measurement, measurement items, and lower body analysis. The following sums up the research: 1. The subjects were $8.85^{\circ}$ (hip breadth angle), $1.58^{\circ}$ (abdomen upper angle), $11.80^{\circ}$ (hip upper angle), and $5.12^{\circ}$ (lateral lower body posture angle). 2. The subjects of Chinese males in their 20s showed three types of lower bodies: Bow Legs & Slight Slant of Lateral Lower Body Type (30.5%)-gap between legs, curve waist-hip contour, average abdomen-hip profile, and lateral lower body posture were slightly slanted forward. Adjacent Straight Legs & Slight Slant of Lateral Lower Body Type (35.8%)-adjacent straight between legs, curve waist-hip contour, slim abdomen-hip profile, and lateral lower body posture were slightly slanted forward. Balance Legs & Large Slant of Lateral Lower Body Type (33.7%)-average between legs, straight waist-hip contour, protruding hip profile, and lateral lower body posture were largely slanted forward. 3. Eight useful variables for the categorization of the subjects' lower body types were chosen through stepwise discriminant analysis, and the hit ratio of discrimination was 97.9%.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.1
• /
• pp.9-17
• /
• 2008

A numerical study for three-dimensional laminar flow in the entrance region of helical tubes connected with straight ones is carried out to investigate the effects of Reynolds number, pitch and curvature ratio on the oscillation periods of the flow. The fully elliptic governing equations were solved by means of a finite volume method. The fully developed laminar flow boundary condition was applied at the straight tube inlet. This results cover a curvature ratio range of 1/10${\sim}$1/320, a pitch range of 0.0${\sim}$3.2, and a Reynolds number range of 62.5${\sim}$2000. A comparison is made with previous experimental correlations and numerical data. The developments of velocity, local and average friction factors are discussed. The average friction factors are oscillatory in the entrance region of helical pipes. It has been found that the angle required for the flow to be similarly developed is most affected by the curvature ratio. The pitch and Reynolds number do not have any significant effect on the angle. The characteristic angle ${\phi}_c(={\phi}/sqrt{\delta})$, or the characteristic length to diameter ratio $s_c(=l\sqrt{\delta} cos(atan{\lambda})/d)$, can be useful to represent the development of flow in helical tubes. As the pitch increases and as the curvature ratio and Reynolds number decrease, the amplitude and the number of flow oscillations along the main streamwise direction decrease.

• Physical Therapy Rehabilitation Science
• /
• v.2 no.1
• /
• pp.44-48
• /
• 2013

Objective: The purpose of this study was to investigate changes of abdominal muscles thickness according to the angle during the active straight leg raise (ASLR) in young healthy subjects. Design: Cross sectional study. Methods: Twenty-three healthy university students (13 men and 10 women) voluntary participated to the study in S University. The ASLR was performed with the subject lying supine with lower extremities straight on a standard plinth, hands resting on the chest, and elbows on the plinth. When one subject performed ASLR from each angles ($30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $90^{\circ}$), compared changes in the thickness of rectus abdominis muscle. Changes in muscle thickness during ASLR test were assessed with ultrasonography. All subjects were to provide enough time of rest after performed ASLR. Rectus abdominis thickness were measured using rehabilitative ultrasound image. Results: Good quality rectus abdominal muscle activation data were recorded during ASLR. The length changes of linea alba showed significantly shorter in between $0^{\circ}$ and $30^{\circ}$ (p<0.05). The thickness of rectus abdominis muscle were significantly different between $0^{\circ}$ and $30^{\circ}$, $0^{\circ}$ and $45^{\circ}$, $0^{\circ}$ and $60^{\circ}$, $0^{\circ}$ and $90^{\circ}$. According to increase of pelvic angle, the thickness of rectus abdominis muscle were more thickening (p<0.05). Conclusions: This result is changes of abdominal muscles thickness according to the angle during the ASLR.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.4 no.1
• /
• pp.11-22
• /
• 1984

In the straight beam inspection of ultrasonic wave, the method for evaluating flaw size by AVG diagram is useful as a method for the quantitative evaluation of results of ultrasonic flaw detection. This study was carried out the measure the size of circular flat flaw with the inclination by straight beam inspection and could be decreased the error of application due to the inclination of flaw by AVG diagram in consideration of correction coefficient. From the result of the experiment, the error by means of the application of experimental values to AVG diagram was increased as the inclination angle grows. Also, it n s increased the error of application as the detecting frequency and diameter of flaw grows in the same inclination angle. In case of diameter of flaw 6mm, AVG diagram could be applied to the inclination angle $3^{\circ}$ for 5 MHz, $7^{\circ}$ for 2.25 MHz, $15^{\circ}C$ for 1 MHz in the range of 20% error and the theory was concided with the experiment to $5^{\circ}C$ for 5 MHz, $10^{\circ}C$ for 2.25 MHz, $15^{\circ}C$ for 1 MHz in the range of 10% error by correction eq. (45) due to the inclination angle. Therefore, it is considered that the results obtained from this study will be somewhat helpful informations for the size evaluation of circular flat flaw with the inclination.